
There must not be any large folds while wearing. If required, you can increase the wrap’s compression by adjusting the
tabs from the bottom to the top. All Juzo ACS Light products can be used with or without the incorporated lining, or with
a separate liner.
Please refer to the detailed instructions in the Juzo Product pamphlet, enclosed in the packaging.
Washing and care instructions
Juzo ACS Light products should be washed at least once a week or more often as required. Prior to washing remove all
touch fasteners. The products can be machine-washed at 30 °C using a laundry detergent for delicate fabrics. A laundry
net additionally protects the product. Please do not use fabric softener. Never use bleach. Do not tumble dry. You can
reduce drying time by placing the products on a thick towel after washing, tightly rolling the towel up and firmly squee-
zing out excess moisture. Do not leave the product in the towel and do not dry it on a radiator or in the sun. Juzo ACS
Light products must not be ironed. The products are not suitable for dry cleaning. The intervals between washing can be
extended by wearing a Juzo liner. Store in a dry place and protect from sunlight.
Juzo ACS Light Knee Wrap (Product code JZ703)
Important: If wearing in combination with thigh and or calf wraps, put the knee wrap on last. Juzo ACS Light knee wraps
can be worn on either right or left leg.
1. Attach the supplied touch fasteners halfway on the tab
ends so that you can secure the tabs from the outside.
5. Check that the product exerts pleasant, clearly noticea-
ble compression. If you feel pain or other problems, loo-
sen the touch fasteners.
2. Put your leg inside the integrated lining (optional). Make
sure that the seam is in the knee crease with cut-out
opening at the back of the knee.
3. First, close the middle tabs to secure
the wrap.
Julius Zorn GmbH · Juliusplatz 1 · 86551 Aichach · Germany · www.juzo.com
T
oomac
Solutions
· 32D Poland RD · Wairau Valley · Auckland · New Zealand · [email protected] · www.toomacsolutions.co.nz4. Tighten the lower tabs around the leg and fix them with
the touch fasteners, followed by the upper tabs.