Topcom BUTLER 1651 User manual

BUTLER 1651/TWIN/
TRIPLE/QUATTRO
USER GUIDE
BEDIENUNGSANLEITUNG
1.3 - 10/08

Important
To use ‘Caller ID’ (display caller), this service has to be activated on your phone line.
Normally you need a separate subscription from your telephone company to activate this
function. If you don’t have the Caller ID function on your phone line, the incoming telephone
numbers will NOT be shown on the display of your telephone.
Wichtig
Zur Verwendung der ‘Rufnummernanzeige’ muss dieser Dienst erst für Ihre Telefonleitung
freigegeben werden. Zur Aktivierung dieser Dienstleistung benötigen Sie meistens ein
separates Abonnement Ihrer Telefongesellschaft.Wenn Sie für Ihre Telefonleitung keine
Rufnummernanzeigefunktion haben, erscheinen die eingehenden
Telefonnummern NICHT im Display Ihres Gerätes.
UK The features described in this manual are published with reservation to
modifications.
DE Die in dieser Bedienungsanleitung umschriebenen Möglichkeiten, werden
vorbehaltlich Änderungen publiziert.
This product is in compliance with the essential requirements and other relevant provisions of the R&TTE directive 1999/5/EC.
The Declaration of conformity can be found on :
http://www.topcom.net/support/cedeclarations.php

Topcom Butler 1651/Twin/Triple/Quattro 3
Topcom Butler 1651/Twin/Triple/Quattro
ENGLISH
Safety Instructions
• Only use the charger plug supplied. Do not use other chargers, as this may damage the
battery cells.
• Only insert rechargeable batteries of the same type. Never use ordinary,
non-rechargeable batteries. Insert rechargeable batteries so they connect to the right
poles (indicated in the battery compartment of the handset).
• Do not touch the charger and plug contacts with sharp or metal objects.
• The operation of some medical devices may be affected.
• The handset may cause an unpleasant buzzing sound in hearing aids.
• Do not place the basic unit in a damp room or at a distance of less than 1.5 m away from
a water source. Keep water away from the handset.
• Do not use the telephone in environments where there is a risk of explosions.
• Dispose of the batteries and maintain the telephone in an environment-friendly manner.
• As this telephone cannot be used in case of a power cut, you should use a
mains-independent telephone for emergency calls, e.g. a mobile phone.
• This telephone uses rechargable batteries. You have to dispose of the batteries in an
environment friendly manner according to your country regulations.
Disposal of the device (environment)
At the end of the product lifecycle, you should not throw this product into the normal
household garbage but bring the product to a collection point for the recycling of electrical
and electronic equipments. The symbol on the product, user guide and/or box indicate this.
Some of the product materials can be re-used if you bring them to a recycling point. By re-
using some parts or raw materials from used products you make an important contribution to
the protection of the environment.
Please contact your local authorities in case you need more information on the collection
points in your area.
Cleaning
Clean the telephone with a slightly damp cloth or with an anti-static cloth. Never use cleaning
agents or abrasive solvents.
To be connected to the public analogue telephone network.
The CE symbol indicates that the unit complies with the essential
requirements of the R&TTE directive.

4Topcom Butler 1651/Twin/Triple/Quattro
Topcom Butler 1651Twin/Triple/Quattro
1 Buttons
1. Alphanumerical buttons
2. Line button
3. Redial / Pause button
4. Left / Flash button
5. Phonebook button
6. Paging button (to retrieve the handset)
7. Mute / Delete button
8. Int/Escape button Int
9. Charge indicator (LED)
10. Call log / Right / handsfree /
11. Volume/melody button /
12. Key lock
13. Ringer ON/OFF
14. Menu / OK button
15. Charge indicator (LED) multi charger
16. Answering Machine Keys (See “11.2 Base Key
Functions”)
17. Messages LED
4
5
14
2
8
7
1
12
3
10
11
13
/P
17
9
6
16
Butler 1651
15

Topcom Butler 1651/Twin/Triple/Quattro 5
Topcom Butler 1651/Twin/Triple/Quattro
ENGLISH
2Display
3Installation
3.1 Base
• Plug one end of the phone cable into the phone unit and the other end into the telephone
line wall socket.
• Connect the small plug of the AC adaptor to the phone and the other end of the adapter
cable to the electric socket.
Icon: Meaning:
You are online
New numbers in call list
Rechargeable battery level indicator
The antenna indicates the quality of reception.
The antenna blinks when the handset is out of range!
Microphone is muted
Memory records are being retrieved or set up
The keypad is locked
There are more digits on the left
There are more digits on the right
During hands free
When ring buzzer is turned off
There are new messages in your voice mail
During internal call
HS-x x = handset number
Power cable
TEL.
SOCKET
Telephone cord

6Topcom Butler 1651/Twin/Triple/Quattro
Topcom Butler 1651Twin/Triple/Quattro
3.2 Multi charger
• Connect the AC adaptor to the electric socket
3.3 Handset
• Insert 2 rechargeable batteries (AAA) inside the battery compartment of the handset.
Put the handset on the base unit. The red Charge LED will lit as long as the handset is
on the base.
Charge the handset for a period of 24 hours before using the handset for the first time. To
extend the battery life time, discharge the batteries completely from time to time. As soon as
the handset emits a warning tone or when the battery icon is empty, you have to put it back
on the base unit for charging.
4 Battery low indication
When the battery is empty, the handset no longer carries out operations. When a battery is
completely empty and you have put the handset on the base unit for a short period of time,
the Battery symbol will appear to be fully charged but this is actually not the case. The battery
capacity will decrease rapidly. We advise you to put the handset on the base unit for 12 hrs
so that it can be recharged completely.
• Full battery
• Empty battery
When you are in the middle of a conversation and the battery is almost empty, the handset
will emit a warning signal. Place the handset on the base unit to charge.
5Operation
5.1 Navigating the menu
The Butler 1651 has a menu system which is easy to use. Each menu leads to a list of
options. To enter the menu, press the Menu button ÆUse the Right or Left key to
+
+
-
-

Topcom Butler 1651/Twin/Triple/Quattro 7
Topcom Butler 1651/Twin/Triple/Quattro
ENGLISH
scroll to the menu option you want. Press OK to select further options or to confirm the
setting displayed. The arrows on the display and shows the possible scroll direction
in the menu. The go back in the menu press the Escape/INT key.
5.2 Setting the language
Press Menu button ÆUse the Right button to scroll to ‘Language’ and press OK Æ
Scroll to the language you want with the Right or Left key and select OK .
5.3 Outgoing calls
5.3.1 Making a phone call
Press the Line button . You will hear the dial tone. ÆEnter the desired telephone number.
ÆPress the Line button when you want to terminate the call.
5.3.2 Call setup with dial preparation
Enter the desired telephone number. An incorrect number can be corrected by means of the
Mute button . When you haven’t pressed a button for 20 seconds, the number you’ve
already entered will disappear and the handset returns to standby mode. ÆPress the Line
button . The number will be dialled automatically. ÆPress the Line button again when
you want to terminate the call.
5.3.3 Redialling the last number dialled
Press the Line key ÆYou will hear the dial tone. ÆPress the Redial key . The number
you last called is dialled automatically.
5.3.4 Redial one of the last 3 numbers dialled
Press the Redial key . The number you last called appears on the display. If you would like
to dial one of the last 3 numbers dialled, press the Redial key a few times until the desired
number appears on the display. ÆPress the Line key . ÆThe number shown on the
display is dialled automatically. ÆAfter finishing your call, press the Line key to hang up.
5.4 Incoming calls
When a call comes in, the handset will start to ring. ÆPress the Line button to answer
the incoming call.
5.5 Activate/deactivate hands free function
This function allows you to communicate without having to pick up the handset. When you
are on the phone, press the Hands free key to activate the hands free function.
Press the same button to deactivate the hands free function.

8Topcom Butler 1651/Twin/Triple/Quattro
Topcom Butler 1651Twin/Triple/Quattro
5.6 Mute function
It is possible to deactivate the microphone during a conversation. Now you can speak openly
without being heard by your correspondent.
Press the Mute button during a conversation. The microphone will be deactivated. The
MUTE symbol . appears on the display. ÆPress the Mute button again when you want
to continue the conversation.
5.7 Setting the volume
During a conversation you can set the volume by pressing the Volume button . You can
set the volume alternatively in between 1-5. You can also use the left/right button.
5.8 Paging
When you press the Paging button on the base unit, the handset emits a ringing signal for
20 seconds. This signal helps you find a lost handset. Press any key to stop the ringing on a
handset.
5.9 Flash button (R)
When you press the R button, also called flash or recall, the unit generates a line interruption
(of 100 ms or 250 ms). It gives you the possibility to use the special services of your
telephone provider and/or to transfer calls when you have a telephone exchange.
5.9.1 Setting the Flash time
Press and hold the redial button for 3 sec. ÆThe display will show:
‘SHORT’ for 100ms or ‘LONG’ for 250ms ÆThe flash time setting will disappear after 2 sec.
from the display
5.10 Setting the ring volume and melody
5.10.1 Handset melody
Press and hold the melody button until the current melody is heard. ÆSelect the desired
melody (1-9) by means of the scroll keys . ÆPress again to confirm the setting.
When you are calling in hands free mode and you want to change the
volume, press the Volume button.
When you use the hands free function for a long time, the batteries will be
discharged faster !
The hands free receiver volume is also adjustable as above described!

Topcom Butler 1651/Twin/Triple/Quattro 9
Topcom Butler 1651/Twin/Triple/Quattro
ENGLISH
5.10.2 Handset ring volume
Press the volume button in standby. ÆThe handset will ring in the current volume.ÆUse
the scroll keys to select the desired volume (0-5). ÆPress again to confirm the
setting.
5.10.3 Base ring volume
You can change the ring volume of the Butler 1651 base.
When base is ringing. ÆPress volume key on base to increase or decrease ring volume
5.11 Key lock
When the keypad is locked, pressing any key will have no effect during standby (except
holding the key).
Press and hold the key. Æappears on the display and the keypad is locked ÆPress
and hold the key again to un-lock the keypad.
When there is an incoming call, you can still answer the call by pressing the Line button .
During the call, the keypad functions as normal. When the call is ended, the keypad will be
locked again.
5.12 Setting the dialling mode
There are two types of dialling mode:
DTMF/Tone dialling (the most common) (default)
Pulse dialling (for older installations)
To change the mode of dialling:
Press and hold the flash R button to toggle between dialling modes: Æ‘PULSE’ will appear
when set to pulse or ‘TONE’ when set to tone (DTMF) dialling ÆAfter 5 sec. the unit returns
to standby
5.13 Handset name
You can change the name that appears on the screen (max. 12 characters) during idle stage:
Press Menu button twice ÆThe currect handset name is shown ÆDelete the character
by the Mute -key. ÆUse the keypad to enter the new name. ÆPress the Menu/OK
button to confirm.
You can turn the ringer volume of each individual handset ON or OFF by
simply press and hold the key in standby.
You can change by accident the dial mode of the phone when pressing the
recall/Flash key ‘R’ for 5 sec in standby. The wrong dialling mode will
cause that the number isn’t dialled correctly or isn’t dialled at all.

10 Topcom Butler 1651/Twin/Triple/Quattro
Topcom Butler 1651Twin/Triple/Quattro
5.14 Prefix
You can set a Prefix number which will always be dialed out automatically before you enter
the telephone number you want to dial. This number will always be dialed even when calling
from phonebook memory, redial, etc...
5.14.1 To Edit or Delete the prefix number:
Press Menu button ÆUse the Right button to scroll to ‘PREFIX’ and press OK Æ
Delete the digits by the Mute -key. ÆUse the keypad to enter the new prefix. ÆPress the
Menu/OK button to confirm.
5.14.2 Temporaly dial out without prefix
Enter the telephone number and press the Line button until the handset icon appears
on the display. The number will be dialled out without Prefix ÆPress the Line button when
you want to terminate the call.
5.15 Using the alphanumerical keypad
With your telephone you can also enter alphanumeric characters. This is useful for entering
a name into the phonebook, giving a name to a hand-set, …
To select a letter, press the corresponding key as many times as is necessary. For example
to select an ‘A’, press ‘2’ once, to select a ‘B’, press ‘2’ twice and so on. To select ‘A’ and then
B consecutively, select ‘A’, wait until the cursor moves on to the next character, then press
‘2’ twice.
To select a space, press 0.
The keypad characters are as follows:
Key First Second Third Fourth Fifth
press press press press press
1+ - / 1
2A B C
3D E F
4G H I
5J K L
6M N O
7P Q R S
8T U V
9W X Y Z
0 Space
When a prefix number is set, all numbers dialed out will be with this prefix!

Topcom Butler 1651/Twin/Triple/Quattro 11
Topcom Butler 1651/Twin/Triple/Quattro
ENGLISH
6 Phonebook
You can program 50 phonebook entries in the phone’s memory. Names can be up to 14
characters long and numbers up to 24 digits.
6.1 Add a phonebook entries
Press and hold the Phonebook button until the -icon starts to blink. ÆEnter the name
you whish to store. ÆPress the Menu/OK button to confirm.ÆEnter the telephone
number.ÆPress the Menu/OK button to confirm.
6.2 Dial a Phonebook entry
Press the Phonebook button to enter the phonebook.ÆPress the left or right key to
search the name you want to dial. ÆPress the Line button and the number will be dialled
automatically. ÆPress the Line button when you want to terminate the call.
6.3 Edit name or number
Press the Phonebook button to enter the phonebook.ÆPress the left or right key to
search the name you want to edit. ÆPress and hold the Phonebook button until the -
icon starts to blink. ÆDelete the character by the Mute -key. ÆUse the keypad to enter
the new name. ÆPress the Menu/OK button to confirm.ÆEnter/delete the telephone
number.ÆPress the Menu/OK button to confirm.
6.4 Delete an entry
When viewing the entry you want to delete, press Mute/Delete key. ÆPress Menu/OK button
to confirm.
7 Caller-ID function (CLIP)
The Topcom B1651 displays the telephone numbers of incoming calls. This function is only
possible if you are subscribed to a telephone operator that provides this service. Contact your
telephone provider for more information. When you receive a call, the numbers are saved in
a Call list. This list can hold 30 telephone numbers (each of max. 23 digits). If the number is
longer then 14 digits, you can press the key to show the other digits!
7.1 New calls
When you’ve received a new unanswered call, the CLIP symbol will blink on the display.
If you wish to insert a pause, press the Redial/Pause button on the
location where you want a pause of 3 sec.
/P

12 Topcom Butler 1651/Twin/Triple/Quattro
Topcom Butler 1651Twin/Triple/Quattro
7.2 Consulting the Call list
Press the Call Log button . The last received call is shown on the display. If the list is empty,
‘EMPTY’ is shown on the display. If not, You can see the name, number and date/time.
Pressing the Menu/OK button the following will be shown on the display:
You can scroll from name to number and date time by pressing the Menu/OK button . Use
the left scroll key to scroll to the previous call. Use the button to show the next call. Æ
You can leave the Call list by pressing the INT key.
* Only when the network sends the time/date together with the telephone number!!! On
some networks with caller ID, time and date will not be displayed
7.3 Calling a number from the Call list
Scroll through the Call list until the desired number is shown on the display. ÆPress the Line
button . The number will be dialled automatically.
7.4 Erasing a number from the Call list
Scroll through the Call list until the desired number is shown on the display. ÆPress the Mute
button and OK to erase the number.
7.5 Erasing all numbers from the Call list
You can only erase all numbers from the call list if all are read.
Press and hold the Mute/Delete button until ‘DELETE ALL’ appears. ÆPress the Menu/
OK button to confirm or Mute/Delete button to cancel.
7.6 Store a number from the call log into the phonebook memory
Scroll through the Call list until the desired number is shown on the display. ÆPress the
Phonebook button . ÆEdit or enter the name and press OK ÆEdit or enter the telephone
number and press OK again to confirm and to go back to the call list.
When number is matching
with the phonebook
number or when CallerID
name is send
When no matching with the
phonebook or CallerID
number without name.
Sequence number + date
and time when call is
received

Topcom Butler 1651/Twin/Triple/Quattro 13
Topcom Butler 1651/Twin/Triple/Quattro
ENGLISH
8 Register/de-register a handset
8.1 Register to a Topcom B1651 base
You can subscribe 4 handsets to one base unit. By default, each handset is subscribed as
handset 1 on the base unit upon delivery (base unit 1).
!!! You only need to subscribe the handset if:
• The handset subscription has been removed from the base unit (e.g. for reinitialisation)
• If you want to subscribe a different handset to this base unit.
The below procedure is only applicable to a Topcom Butler 16xx handset and base unit!!
Keep the Paging key on the base unit pressed for 10 seconds until the Charge indicator on
the base unit begins to blink rapidly. The Charge indicator will blink rapidly for one minute.
During this minute, the base unit is in register mode and you must do the following to
subscribe the handset:
Press Menu button ÆUse the Right button to scroll to ‘REGISTER’ and press OK
ÆEnter the number of the base unit you would like to subscribe the handset to (1-4) ÆThe
unit will start searching for the base and when found it will ask to enter the pin code (4 digits):
ÆEnter the base pin code (0000) and press OK . ÆIf the pin is wrong, the handset will
restart the searching for the base. ÆWhen the handset is registered, it will show ‘HS’
followed by the handset number.
8.2 Removing a handset
You can remove a handset from a base to allow another handset to be registered:
Press Menu button ÆUse the Right button to scroll to ‘REMOVE HS’ and press OK
ÆEnter the pin code (0000) and press OK ÆEnter the handset number (1-4) you want
to remove and press OK . ÆThe unit will go back to standby is the removal is successfully.
If not, it will ask again to enter the handset number
9 Call transfer and Intercom between two handsets
9.1 Call transfer and conference call during an external call
During an external call, press the INT key followed by the number (1-4) of the other handset.
ÆThe other handset will start to ring:
– When the other handset takes the line you can talk internally.
If you hang up, the external line will be connected with the other handset.
You can only remove existing handsets and others then the one you are
using.
These functions only work when more then one handset (like a Twin/Triple/
Quattro version) is registered to the base!

14 Topcom Butler 1651/Twin/Triple/Quattro
Topcom Butler 1651Twin/Triple/Quattro
If you press and hold the INT key for 3 seconds you can talk with the 2nd handset
and external line at the same time (conference call)
– Or press the INT key again to return to the external call.
ÆPress the Line button to end the call.
9.2 Internal call (intercom)
• In standby press the INT key followed by the number (1-4) of the other handset.
• The other handset will start to ring. You can stop the ringing by pressing the Line
button .
• If the other handset answers the call by pressing the Line button you can talk
internally.
• Press the Line button to end the call.
10 Reset of the handset
This will undo all changes and set back all default settings (ringer volume, ringer melody,
etc...).
Press Menu button ÆUse the Right button to scroll to ‘RESET’ and press OK Æ
Enter the pin code (0000) and press OK ÆThe unit will go back to standby.
Default handset settings are:
Handset volume 3
Handset melody 9
Flash time Short
Dial mode Tone
11 Answering Machine
The Butler 1651 has a built-in digital answering machine with a recording capacity of 80 min.
The answering machine can be operated remotely and features the possibility of recording
two outgoing messages (OGM 1 and OGM 2) (maximum of 2 min).
There are 2 possibilities:
• With OGM 1, the caller has the possibility to leave a message
• With OGM 2, only the outgoing message is given without the caller having the
opportunity to leave a message
The max. recording time for each incoming message = 3 min.
11.1 LED Display
The LED display on the base indicates how many messages you have received. When there
are new messages, the LED display on the base will blink and only indicate the amount of
All memories (redial, phonebook, call log,...) and handset name will not be
erased!

Topcom Butler 1651/Twin/Triple/Quattro 15
Topcom Butler 1651/Twin/Triple/Quattro
ENGLISH
new messages. If the answering machine is switched off, the LED display does not light up
and also the LED will be turned OFF.
‘FL’ will be shown on the display when the internal memory is full and no new messages can
be recorded.
11.2 Base Key Functions
11.3 Outgoing Messages
Two outgoing messages of 2 minutes can be recorded (OGM1 and OGM2).
• Outgoing message 1 for the answering function and possibility for callers to leave a
message.
• Outgoing message 2 for the answering function without allowing callers to leave a
messages on the machine.
11.3.1 Recording outgoing messages (OGM 1 or OGM 2)
• Press the -key to select the OGM.
• The answering machine will playback the recorded OGM
• Press the -key for two seconds
• Record the outgoing message after the beep
• Press the Stop -key to stop recording.
Key Stand-by mode During message
play-back
Press key briefly press key for 2 seconds
1Play OGM Record OGM Go to previous message
2Playback messages None Pause
3None Record memo Skip message
4Set volume
speech + ringing
Answering ON/OFF Set volume
5/ Select OGM None Stop
6Play VIP-code Set VIP-code None
7Current number of
ring tones
Set numbers of
ring tones
None
8None Delete all messages Delete message or
delete OGM
9Record telephone
conversation when
handset is off-hook
None None
The & keys are at the bottom of the base.

16 Topcom Butler 1651/Twin/Triple/Quattro
Topcom Butler 1651Twin/Triple/Quattro
11.3.2 Playback the Outgoing Message
To check the outgoing message now set:
• Press the -key.
11.3.3 Select outgoing message
• Press the -key to switch between the 2 outgoing messages.
– O1 = OGM 1 Ædisplay will show the amounth of messages
– O2 = OGM 2 Ædisplay will show “".
11.3.4 Erasing the Outgoing Message
Erase the outgoing message as follows:
• Select the desired outgoing message by pressing the -key.
• Press the key to play the outgoing message.
• Keep the key when the OGM is played back.
11.4 Turning Answering Machine On/Off
If the answering machine is on, the -LED will light up and the machine will automatically pick
up the line after a number of rings (see 'Setting Number of Rings').
• Press and hold the key for 2 secto switch on the answering machine. The LED
display will be turned on.
• Press and hold the key for 2 seconds to switch off the answering machine. The LED
display will be turned off.
11.5 Setting number of Rings
The number of rings after which the answering machine will answer calls can be set from
2 – 9 and TS (Toll saver). The standard setting is 3 rings. In Toll saver mode, the machine
will answer after 5 rings if there are no new messages, and after 2 rings if there are new
messages. If there are no new messages and you call your machine to check your messages
remotely (See “11.14 Remote operation”), you can hang up after the 2nd ring. You do not
need to pay connection fees and you know that you do not have any new messages.
• Briefly press the key. The display will show the current numbers of rings.
• Press the key for 2 secs to set the number of ringing tones.
• Press the or key to change the current number of rings.
• Confirm the setting by pressing the key.
To stop playing the welcome note briefly press the Stop -key.
It is only possible to select an outgoing message if the answering machine
is turned on.
If the memory is full, only outgoing message 2 can be selected (only
answering without recording messages.
Even if the answering machine is off, the machine will automatically pick up
after 10 rings in order to enable remote activation (see 9.15 Remote
operation).

Topcom Butler 1651/Twin/Triple/Quattro 17
Topcom Butler 1651/Twin/Triple/Quattro
ENGLISH
11.6 Checking number of Rings
• Press the key briefly.
• The display will show the number of rings set.
11.7 Programming the VIP Code
The VIP code is a 3-digit code used to operate the machine remotely (see Remote
Operation). The VIP code is set to '321' by default.
11.7.1 Changing the VIP Code
• Keep the - key pressed down for 2 secs to change the VIP code.
• The first digit of the VIP code is displayed blinking on the screen.
• Press a few times on or keys to set the first number of the VIP code.
• Press the key to confirm the first number. The display will show the current set 2nd
digit of the VIP code.
• Press a few times on or keys to set the second digit of the VIP code.
• Press the key to confirm the second number. The display will show the current set
3rd digit of the VIP code.
• Press a few times on or keys to set the third digit of the VIP code.
• Press the key to confirm the VIP code. You will hear a long beep. The new code will
be displayed digit by digit.
11.7.2 Checking the VIP Code
• Press the key to show the VIP code. The display will show the VIP code digit by digit.
11.8 Operation
If a call is received and the answering machine is turned on, the answering machine will
automatically pick up the line after the set number of rings. If
• Outgoing message 1 has been selected, it will be played. After the outgoing message, a
beep will be heard and the caller can leave a message (of a max. 3 minutes).
• Outgoing message 2 has been selected, it will be played. After the beep, the line will
automatically be disconnected. The caller does not have the possibility to leave a
message.
• If you do not press any keys for 3 seconds, the machine will revert
back to the answering machine menu, without changing the settings.
• If there is a loss of power in the base, the number of rings will revert to
3.
If there is a loss of power to the base, the VIP code will revert to '321'.
If you do not press any keys for 8 seconds, the previous VIP code is saved
and the machine automatically exits the VIP setting mode.

18 Topcom Butler 1651/Twin/Triple/Quattro
Topcom Butler 1651Twin/Triple/Quattro
•
11.9 Recording a Memo
With the Butler 1651, you can record memos. These memos are considered an incoming
message that can be picked up later by the user. The max. recording time for a memo is 2
minutes.
• Press the key for 2 seconds. After the beep, say your memo.
• Press the Stop -key to stop recording.
11.10 Playback of Incoming Messages and Memos
• Press the key to play the messages and memos.
• The messages are played one at a time. If there are new messages, only the new
messages (those that have not been heard) are played.
• During playback, you can:
– go to the beginning of the current message by pressing the key once.
– go to the previous message by pressing the key twice.
– stop playback by pressing the Stop key.
– interrupt playback by pressing the Pause key . Press the play key again to
restart playback.
– go to the next message by pressing the key.
11.11 Erasing Messages
11.11.1 Erasing Messages One at a Time during Playback
Start message playback as explained above.
• When the message to be erased starts playing, press the delete key for 2 secs
• The display will show ‘dL’.
• Press the delete key again to confirm.
11.11.2 Erase all messages
One can also erase all heard messages at one time. This erases only the messages that
have already been heard. New messages are not erased.
• Press the delete key for 2 secs.
• The display will show ‘dL’.
• Press the delete key again to confirm.
11.12 Memory Full
If the memory is full, ‘FL’ will flash on the display. If the answering machine is turned on and
a call comes in, the machine will automatically play OGM 2 (answering machine function
without recorded caller message).
• Erase all the messages after listening to them.
• The memory is free again.
If, during pick-up, nothing is said for 8 seconds, the line will be
automatically disconnected.

Topcom Butler 1651/Twin/Triple/Quattro 19
Topcom Butler 1651/Twin/Triple/Quattro
ENGLISH
11.13 Record a telephone converstaion
You can record a Telephone conversation by pressing the key for 2 seconds.
The max. recording time depends on the free memory (80 minutes if no messages are
recorded).
During the recording, you and the other side of the line will hear every 15 seconds a beep to
warn this conversation is been recorded!
To stop the recording, press the Stop key. The recording will be stored as a normal
message inside the phone.
11.14 Remote operation
The answering machine can only be operated remotely using a tough-tone phone (DTMF
tone selection system).
• Call your machine.
• The answering machine picks up the line, you hear the outgoing message and a beep.
•Press2x““
• After the beep, slowly dial the VIP code (default 321).
• You will hear two short beeps for confirmation.
• Enter the next codes to use the desired function:
a) Listening to Messages
• Press ‘2’ (listen to messages). The answer machine will play the messages.
During playback, you have the following options:
• Press ‘2’ to stop playback.
• Press ‘2’ to restart playback.
• Press ‘3’ to go to the next message.
• Press ‘1 1' to go to the previous message.
• Press ‘1’ to repeat the current message.
• Press ‘6’ to stop playback.
• Press ‘7’ to erase the current message.
b) Erasing All Old Messages
After listening to all messages, press ‘0’ to erase all messages.
c) Playing Outgoing Message
• Press ‘4’ to play the current outgoing message.
d) Recording Outgoing Message
• Press ‘9’ to select OGM 1 or OGM 2.
• Press ‘5’ to start recording
• A beep will indicate that you can start recording.
• Say your message.
• Press ‘6’ to stop recording.
Recording a telephone conversation may not be allowed in some countries!

20 Topcom Butler 1651/Twin/Triple/Quattro
Topcom Butler 1651Twin/Triple/Quattro
e) Turning Answering Machine On/Off
• Press the '9 ' key to switch on the answering machine.
• Press the '8' key to turn off the answering machine.
f) Ending Remote Operation
If you want to end remote operation, press ‘6’.
11.15 Turning answering machine on remotely
If the answering machine is switched off, you can turn it on remotely.
• Call your machine.
• The machine will pick up automatically after 10 rings and play outgoing message 2.
•Press2x““
• After the beep tone dial the VIP code (default 321) slowly during the message plays.
• Press the '9' key. A long beep will be heard.
• Press ‘6’ to stop operation.
12 Troubleshooting
Problem Possible cause Solution
No Display Batteries not charged Check the position of the
batteries
Recharge the batteries
No dialling tone Telephone cable not
properly connected
Check the connection
of the telephone cable
Volume of conversation
partner too low
Adjust the volume during the
conversation by pressing the
volume key
Handset ringer volume too low Adjust the ringer volume
Not possible to dial a number Wrong dial mode See “Setting the dialling mode”
to set the correct dial mode
Recording will be automatically interrupted after 2 minutes.