Topcon Dl-502 User manual

DL-502

DL-503

INSTRUCTION MANUAL

DIGITAL LEVEL

FC11808-A022-02

DL-500 SERIES

http://www.topcon.co.jp

GLOBAL GATEWAY http://global.topcon.com/

Please see the attached address list or the following website for contact addresses.

Cover1-4.fm 1 ページ２０１０年４月５日　月曜日　午後１２時０分

SURVEYING INSTRUMENTS

Thank you for selecting the Digital Level DL-502/503.

• Please read this operator's manual carefully before using this

product.

• Verify that all equipment is included. See "20.1 Standard Equip-

ment".

• DL-502/503 has a function to output data saved in DL-502/503 to

a connected computer. Commands operations from a computer

can also be performed. For details, refer to the “Output Formats

and Command Explanations (DL Edition)” manual and ask your

local dealer.

• The specifications and general appearance of the instrument are

subject to change without prior notice and without obligation by

TOPCON Corporation and may differ from those appearing in this

manual.

• The content of this manual is subject to change without notice.

• Some of the diagrams in this manual may be simplified for easier

understanding.

DIGITAL LEVEL

DL-502

DL-503

DL-500 SERIES

INSTRUCTION MANUAL

DL502-503.book 1 ページ２０１０年４月５日　月曜日　午前９時４７分

CONTENTS

Read This First

Introduction

Preliminaries

Surveying

Managing

Recorded Data

1. Precautions for Safe Operation ..........................4

2. Precautions.........................................................7

3. DL Functions ......................................................9

3.1 Parts of the Instrument and Operation .......9

3.2 Display......................................................11

3.3 Operating Keys.........................................15

3.4 Operating Modes ......................................16

4. Installing and Removing the Battery.................18

5. Setting Up the Instrument.................................19

6. Focusing and Sighting ......................................20

7. Basic Operation ................................................22

7.1 Reading the Staff......................................22

7.2 Measuring in Status Mode........................25

7.3 Measuring using Wave-and-Read ............26

8. Setting Up Data Storage...................................29

8.1 JOB Setting ..............................................29

8.2 Record Conditions ....................................31

8.3 Double-run Measurement.........................32

8.4 Flow of Recording Data ............................32

9. Measuring Height Difference ............................36

10. Measuring Elevation .........................................39

11. Setting Out Height Difference, Distance, and

Elevation...........................................................42

11.1 Setting Out Height Difference...................42

11.2 Setting Out Distance.................................44

11.3 Setting Out Elevation................................45

12. Other Measurement Functions .........................48

12.1 Measuring Horizontal Angle .....................48

12.2 Using the Instrument as a Standard

Level .........................................................48

13. Displaying Recorded Data................................49

13.1 Data Check and Edit.................................49

DL502-503.book 2 ページ２０１０年４月５日　月曜日　午前９時４７分

Managing

Recorded Data

Other

Procedures

Specifications

Regulations

13.2Number of Recorded Points............................50

14. JOB Delete .......................................................51

15. Sending Recorded Data ...................................53

15.1 Connecting to a Computer or Data

Collector ...................................................53

15.2 Data Output ..............................................54

16. Changing the Settings ......................................56

16.1 Measuring Mode.......................................56

16.2 Fractional / Decimal representation of

Height Unit................................................57

16.3 Communication Parameters .....................58

16.4 Auto Power-Off .........................................58

16.5 Unit of Measurement ................................59

17. Warnings and Error Messages .........................60

18. Charging the Battery.........................................63

19. Checks and Adjustments ..................................65

19.1 Adjusting the Circular Level......................65

19.2 Adjusting the Reticle.................................66

20. Equipment and Accessories .............................72

20.1 Standard Equipment.................................72

20.2 Optional Accessory...................................73

20.3 Staffs ........................................................74

21. Specifications ...................................................76

22. Regulations.......................................................80

DL502-503.book 3 ページ２０１０年４月５日　月曜日　午前９時４７分

Read This First

1. Precautions for Safe Operation

For the safe use of the product and prevention of injury to operators

and other persons as well as prevention of property damage, items

which should be observed are indicated in this operator's manual by

WARNING and CAUTION indications.

The definitions of the indications are listed below. Be sure you

understand them before reading the manual's main text.

Definitions of Indications

• Do not use voltage other than the specified power supply voltage.

Fire or electrical shock could result.

• Do not use the unit in areas exposed to high amounts of dust or

ash, in areas where there is inadequate ventilation, or near

combustible materials. An explosion could occur.

• Do not perform disassembly or rebuilding. Fire, electric shock or

burns could result.

• Never look at the sun through the telescope. Loss of eyesight could

result.

• Do not look at reflected sunlight from a prism or other reflecting

object through the telescope. Loss of eyesight could result.

• Do not use the carrying case as a footstool. The case is slippery

and unstable so a person could slip and fall off it.

• Do not place the instrument in a case with a damaged catch, belt or

handle. The case or instrument could be dropped and cause injury.

WARNING

Ignoring this indication and making an operation

error could possibly result in death or serious

injury to the operator.

CAUTION

Ignoring this indication and making an operation

error could possibly result in minor injury or

property damage.

General

Warning

Caution

DL502-503.book 4 ページ２０１０年４月５日　月曜日　午前９時４７分

Read This First

• Do not use under thunderous weather conditions. This unit is

conductive and if struck by lightning, death or injury could result.

• Handle with care when using near high voltage cables or

transformers. This unit is conductive and contact could result in

electric shock.

• When mounting the instrument to the tripod, tighten the centering

screw securely. Failure to tighten the screw properly could result in

the instrument falling off the tripod, causing injury.

• Tighten securely the leg fixing screws of the tripod on which the

instrument is mounted. Failure to tighten the screws could result in

the tripod collapsing, causing injury.

• Do not carry the tripod with the tripod shoes pointed at other

persons. A person could be injured if struck by the tripod shoes.

• Keep hands and feet away from the tripod shoes when fixing the

tripod in the ground. A hand or foot stab wound could result.

• Tighten the leg fixing screws securely before carrying the tripod.

Failure to tighten the screws could lead to the tripod legs extending,

causing injury.

• Use only the specified battery charger to recharge batteries. Other

chargers may be of different voltage rating or polarity, causing

sparking which could lead to fire or burns.

• Do not place articles such as clothing on the battery charger while

charging batteries. Sparks could be induced, leading to fire.

• Do not use damaged power cords, plugs or loose outlets. Fire or

electric shock could result.

• Do not use batteries or the battery charger if wet. Resultant

shorting could lead to fire or burns.

Staff

Warning

Tripod

Caution

Power Supply

Warning

DL502-503.book 5 ページ２０１０年４月５日　月曜日　午前９時４７分

Read This First

• To prevent shorting of the battery in storage, apply insulating tape

or equivalent to the terminals. Otherwise shorting could occur

resulting in fire or burns.

• Do not heat or throw batteries into fire. An explosion could occur,

resulting in injury.

• Do not connect or disconnect power supply plugs with wet hands.

Electric shock could result.

• Do not touch liquid leaking from batteries. Harmful chemicals could

cause burns or blisters

Caution

DL502-503.book 6 ページ２０１０年４月５日　月曜日　午前９時４７分

Read This First

2. Precautions

Using the Instrument

• The DL-502/503 is a precision instrument. Avoid severe shocks or

vibration.

• Be careful when removing the instrument from its case.

• Do not place the DL-502/503 directly on the ground.

• When the operator leaves the DL-502/503, the vinyl cover should

be placed on the instrument.

• Never carry the DL-502/503 on the tripod to another site.

• Always turn the instrument off and remove the battery before

storing the instrument in its case.

• When the instrument is placed in the carrying case, see "20.1

Standard Equipment".

• Always wipe off moisture and dirt adhering to the instrument during

survey work. Moisture or dirt on the lens may result in incorrect

readings.

• Consult your local dealer before using the instrument under special

conditions such as long periods of continuous use or high levels of

humidity. In general, special conditions are treated as being outside

the scope of the product warranty.

Maintenance

• Always clean the instrument before returning it to the case. The

lens requires special care. Dust it off with the lens brush first, to

remove tiny particles. Then, after providing a little condensation by

breathing on the lens, wipe it with the supplied cleaning cloth or

lens tissue.

• If the display is dirty, carefully wipe it with a soft, dry cloth. To clean

other parts of the instrument or the carrying case, lightly moisten a

a soft cloth in a mild detergent solution. Wring out excess water

until the cloth is slightly damp, then carefully wipe the surface of the

unit. Do not use any organic solvents or alkaline cleaning solutions.

• Store the instrument and accessories in a dry room where the

temperature remains fairly constant.

• If any trouble is found with the screws or optical parts (e.g. lens),

contact your local dealer.

DL502-503.book 7 ページ２０１０年４月５日　月曜日　午前９時４７分

Read This First

• Always close the case when empty to protect the interior from

humidity and dust.

• Regular checking and adjustment is recommended to maintain

instrument precision.

Exceptions from responsibility

• The user of this product is expected to follow all operating

instructions and make periodic checks (hardware only) of the

product’s performance.