Topens TCS173 User manual

C030501 VER21a
User Manual of Wireless Push Button
(Item No. TC173)
Thank you for purchasing the wireless push button remote control (TC173). It
can be mounted not only on wall in the room but also in the car or any other
place for user convenience. Read the manual carefully and completely before
you permanently mounting the push button.
Installation
There are 2 parts of the push button, one is remote key and another is the
holder. You should take the remote key out before the installation. You can
detach the holder from the push button according to Fig.1.
There are 2 methods to install the push button according to you needs. One is
permanently mounting to the wall (Fig.2) and another is installing to the post for
portable using (Fig.3).
Fig. 1
Fig. 2

Program the push button to the control board
Press and release the button for learning the remote control on the control
board, the LED will be on or displaying for programming. And then press the
remote key of the push button twice in 2 seconds, the LED will flash for 4
seconds then back to standby mode. Now the push button has been
programmed successfully.
TOPENS Website
www.topens.com
Any question, please do not hesitate to contact us:
E-mail: [e-mail]
Kindly include your Product Model, Purchasing Date & Site, Order #,
and your contact information. All your concerns will be replied within
24 hours.
Tel: [phone] (China)
Mon-Fri 9:00AM-5:30PM (UTC +08:00)
Fig. 3