TOPIC-LIGHT IMAX 3.0W RGB User manual

User s Manual
,
Thank you very much for choosing our product, for your safety,
please read this manual carefully before your operation.
This manual included installation and using information.
Please install and operate it according to the requirement
of this manual.
Wave effect mode(manual active)
Channel Function DMX512 Specification
1192~255
Running
2Laser On/Off 128~255
Laser Off
0~255
0~31
32~63
224~255
192~223
160~191
128~159
96~127
64~95
2~255
Laser On
0~127
Original color
Red
Wave effect mode
3Wave Scope
40~255 From low to high
5colour
Yellow
Green
Cyan
Blue
Purple
White
6Original
Color gradual change
0~1
Color
gradual change
0~127
7128~255
drawing Manual drawing
Gradual drawing speed
16 Gobos (255/16)
0~2558Gobo
From right to left
From left to right
From inside to outside
From outside to inside
Wave stationary degree
Wave flow speed
0~63
64~127
128~191
192~255
128~255
9Wave mode
From small to big
Wave Frequency
0~127
10 Wave flow speed
11
24
No use
No use No use
No use
|
7
IMAX RGB laser system
IMAX 3.0W RGB

Open the carton
Foryou can safety use this product, please carefully read this manual before
using. And according to the operate rule, to avoid the damaged of the light or
body injure. Please handle carefully after you received the product. Check if
the product had been damaged by transport , and check the accessories as
below:
Laser Projector 1 pc User's Manual 1copy
Power Cable 1 pc DMX Signal Cable 1pc
Remote Key 1 pc
Note:
□You must operate it according to the rules, please don't dismantle the light
randomly, please contact to the professional people when arise the fault.
You must appeal the professional person for installation, please confirm
if the marked voltage is matched with your using voltage before installation.
Please don't connect to the power or turn on the light when installing the
light, and keep there is no flammable substances or decoration within 0.5m.
and keep the light have 15cm distance with the wall, make sure the aeration
conduit haven't be jammed.
The light must be fixed, and use the safety rope which can bear 10 times
weight of the light to make the accessorial hanging installation.
To connect the earth is very important in order to make sure the safety.
The light must have 1m distance with the irradiation goods.
To avoid the sundries get into the light to cause the fault.
As the character of the laser light, you must turn off it at least for 25 minutes
after use it for 3 hours. Then you can use it again after cooling the laser light.
You must use the original package and note to keep it shockproof when
you transport it again.
□
□
□
□
□
□
□
□
1
ILDA DB25 IN
ILDA DB25 OUT
LCD-DMX
OFFON
Remote Lock
Key
ON OFF
IN---DMX---OUT
POWER INPUT
345
6 7
1 2
MIC
98
MIN MAX
0~255
0~31
32~63
224~255
192~223
160~191
128~159
96~127
64~95
2~255
8 gobo teams(255/32=0~7)
Original color
Red
14 The 2nd Gobo
team selection
15 The 2nd Gobo
selection 0~255 16 gobo teams(255/16=0~15)
16 The 2nd colour Yellow
Green
Cyan
Blue
Purple
White
17 Original
Color gradual change
0~1
The 2nd Color
gradual change
0~127
18 128~255
The 2nd drawing Manual drawing
Gradual drawing speed
Gobo size from big to small(manual)
Gobo size from big to small(auto)
Gobo size fromsmall to big(auto)
0~127
128~191
192~255
19 The 2nd
Gobo zoom
Stationary Pan rotate angle(0~360 degree)
Pan clockwise rotate speed
Pan anti-clockwise rotate speed
Stationary Tilt rotate angle(0~360 degree)
Tilt clockwise rotate speed
Tilt anti-clockwise rotate speed
Stationary centre rotate angle(0~360 degree)
Centre clockwise rotate speed
Centre anti-clockwise rotate speed
0~127
128~191
192~255
0~127
128~191
192~255
0~127
128~191
192~255
20
21
22
Horizontal rotation
The 2nd
Vertical rotation
The 2nd
Centre rotation
The 2nd
0~127
128~191
192~255
0~127
128~191
192~255
23
24
Main pattern
Horizontal move
The 2nd
Vertical move
Stationary Pan move
Pan right move
Pan left move
Stationary Tilt move
Tilt right move
Tilt left move
6
XY
10

The specification of the front and rear panel:
Technology Parameter:
Periodically maintain the product, use the cotton stick dip the alcohol and
clean the lens, for improve the output beam, please don't use the wet cloth
or other chemical liquid to wipe the lens. The clean time must depends on
the operation frequency and the environment ,we suggest clean it 20 days once.
Please wipe the case periodically, inspect and clean the orifice of the fan.
Warning: Please confirm that you had cut off the power before you installing
or repairing.
□
□
□
Maintenance:
1.Laser 650nm Red 1500mW,532nm Green 500mW,445nm Blue 1000mW
2.Scan Speed: Max. 50kpps
3.DMX channel:Digital LCD display 24channels
4.Control mode:Sound Activel/Auto-Work/DMX512/ILDA PC control
5.Cooling method:Fan cooling
6.Power:AC90V~250V,50~60HZ
7.Power consumption:250W
：
Power input to the socket,fuse inside
Key:safety lock,use to turn on or off the laser light
Remote Lock:remote lock,laser light irradiance when the 1 and 2
foot of the DB9 plug connected, and the laser off when the 1 and 2
foot of the DB9 disconnected.
ON/OFF:Power Switch
ADDRESS:Binary IP code switch
Press Menu to choose control modes
1. Music Active
2. Auto Active
3. DMX512
When 10 is ON,it means controller connect to control.1~9 is DMX IP code.
In the DMX node,laser will turn off if the DMX signal interrupted.
ILDADB25-F/M stand ILDA interface,use to control the exterior computer.
When the ILDA interface connected to the exterior console,light will
automatic change to exterior control mode,and needn t to convert switch.
DMX IN/OUT:DMX signal output and input
Min-Max:Volume and sensitivity adjustment
MIC:microphone
①
②
,
1
2
3
4
5
6
7
8
9
Double pattern mode (manual active)
Channel Function DMX512 Specification
1128~191
Running
2Laser On/Off 128~255
Laser Off
0~255
0~31
32~63
224~255
192~223
160~191
128~159
96~127
64~95
2~255
Laser On
0~127
8 gobo teams(255/32=0~7)
Original color
Red
Double pattern mode
3Main Gobo
team selection
4Main Gobo
selection 0~255 16 gobo teams(255/16=0~15)
5Main colour Yellow
Green
Cyan
Blue
Purple
White
6Original
Color gradual change
0~1
Main Color
gradual change
0~127
7128~255
Main drawing Manual drawing
Gradual drawing speed
Gobo size from big to small(manual)
Gobo size from big to small(auto)
Gobo size fromsmall to big(auto)
0~127
128~191
192~255
8Main Gobo zoom
Stationary Pan rotate angle(0~360 degree)
Pan clockwise rotate speed
Pan anti-clockwise rotate speed
Stationary Tilt rotate angle(0~360 degree)
Tilt clockwise rotate speed
Tilt anti-clockwise rotate speed
Stationary centre rotate angle(0~360 degree)
Centre clockwise rotate speed
Centre anti-clockwise rotate speed
0~127
128~191
192~255
0~127
128~191
192~255
0~127
128~191
192~255
9
10
11
Main
Horizontal rotation
Main
Vertical rotation
Main
Centre rotation
0~127
128~191
192~255
0~127
128~191
192~255
12
13
Main
Horizontal move
Main
Vertical move
Stationary Pan move
Pan right move
Pan left move
Stationary Tilt move
Tilt right move
Tilt left move
52
10 X invert & Y invert

Specification
Music mode(music active)
Double pattern mode(manual active)
Wave effect mode(manual active)
Channel Function DMX512
1Play mode
0~0
1~63
64~127
128~191
192~255
Auto mode(Auto active)
Off
DMX512 Channel List
The fixture can display two different patterns at the same time---24
channels version. And the 2 pattern can move with the main pattern
---11 channels version. Also you can display one pattern only---13channels
version. The function of each channel as following .
nd
Channel Function DMX512 Specification
Auto mode(music active)
11~63 Running music modeRunning
2Speed
0~15
16 Class speed(from slow to fast)
16~31
32~47
48~63
64~79
80~95
96~111
160~175
144~159
128~143
112~127
3Shows
Re run all
0~255
Re run show1
Re run show2
Re run show3
Re run show4
Re run show5
Re run show6
Re run show7
Re run show8
Re run show9
Re run show10
192~207
176~191
208~223
224~239
240~255
Re run show11
Re run show12
Re run show13
Re run show14
Re run show15
4
|
No use No use
24 No use No use
Auto mode(Auto active)
Channel Function DMX512 Specification
163~127 Running Auto modeRunning
2Speed
0~15
16 Class speed(from slow to fast)
16~31
32~47
48~63
64~79
80~95
96~111
192~207
176~191
160~175
144~159
128~143
112~127
208~223
224~239
240~255
3Shows
Re run all
0~255
Re run show1
Re run show2
Re run show3
Re run show4
Re run show5
Re run show6
Re run show7
Re run show8
Re run show9
Re run show10
Re run show11
Re run show12
Re run show13
Re run show14
Re run show15
4
24
|
No use No use
No use No use
3
4
LCD-DMX
Music Active
Auto Active
DMX512
Address
OR
Select Mode
Address Code Setting
Enter
Menu
Save
DownUp
Open