Topmodel CZ EL Nino 02094 User manual

GB - USA Parts list
Part # Part name Material, dimensions Loose In bag
building instruction 01 -
1 fuselage fibreglass 01 -
1-1 engine mount fibreglass 2 mm - 01
1-2 servo tray plywood 4 x 18 x 36 mm - 01
2 wing fibreglass hollow molded 01 -
2-2 wing fixing screw screw 4 x 10 mm - 01
2-21 centering pin fibreglass ∅ 4 x 56 mm - 01
2-3 nut aluminium 4 - 01
2-31 nut mount plywood 3 x 20 x 37 mm - 01
2-41 wing servo cover fibreglass - 02
2-5 aileron pushrod piano wire ∅ 1,2 x 60 mm - 02
2-6 lock pushrod plastic ∅ 2/1 - 01
2-8 aileron horn fibreglass plate 1 mm - 02
3 horizontal stabilazer fibreglass hollow molded 01 -
3-2 fixing elevator carbon ∅ 1,5 x 10 mm - 02
3-5 elevator link plastic ∅ 0,8 x 570 mm
piano wire ∅ 1,2 x 140 mm
01+01 -
3-6 threaded link PJ 2764 - 01
3-8 elevator horn fibreglass plate 1 mm - 01
7 stickers 02
RECO ENDED EQUIP ENT:
Pieces Item No. www.topmodelcz.cz
Transmitter 4 channel
Receiver 5 channel
Servo SS1816 2 ailerons 0201816
Pico servo PS1616 1 elevator 0201616
otor ega ACn 16/15/3 1 for recreational flying 20161503
Controller: XREG 60 1 for 3S LiPo battery 099REG60
SPIN 75 OPTO 1 for 4-5S LiPo battery SPIN 75 OPTO
RX battery 4,8V 1 for OPTO controller
Spinner: Alu spinner for standard e. props Ø 30 1 7020
Propeller: CA SPEED PROP 12x12 cm 1 1361.12.12
ATTENTION:
This model costruction kit is not a toy and is not suitable for childern under the age of 14.
Incorrect use of this material could cause material damage or person injury. You are fully responsable for your
actions when you use this model.
Fly ata safe distance from occupied zones. Be sure that no one else is using the same frequency as you.