topsmart TSC-IP113E User manual

IPC Fast Operation User Manual
—HD-IP Camera
Please refer to the complete User
manual for more information from the CD.
1 The Important Safety Information
Please be sure to read the following important safety
information before install and use the product.
Notes：
●The power supply must through safe attestation. Its output
voltage, current, voltage polarity and operating
temperature must match the camera’s requirement.
●When using the camera in the thunderbolt
condition,please note to mount Anti-thunder device or put
off the power supply plug and cable.
●In order to capture high quality pictures, the power
supply’s cable and video output cable should not be too
CAUTION:
TO REDUCE THE RISK OF ELECTRIC DO NOT REMOVE
COVER OR BACK NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO OUALIFIED SERVICE PERSONNEL.
CAUTION:
TO PREVENT ELECTRIC SHOCKS AND RISK OF FIRE
HAZARDS, DO NOT USE OTHER THAN SPECIFIED POWER
SOURCE.
CAUTION:
RISK OF ELECTRIC. DO NOT
OPEN
2 Brief Introduction of the products
Specifications
Features:
Weatherproof IR Camera IP66
Advanced H.264 High profile compression
Support all kinds of browsers:IE,Chrome,Firefox
Support several servers, IP address, DDNS, FTP,SMTP
Support single, dual, three streams
Support iPhone, iPad, Android remote monitor
Support connect to NVR
Support ONVIF2.0
Reliability and compatibility
Low streams and high resolution image
3 Connection
RJ45
Network Structure
4 Access to the IP Camera via IE
1. Use correct power supply
2. Make sure the device IP address is in the same LAN with the
router, the default IP address of the IPC is 192.168.1.168
3.Go to CD->IPCSearch.exe and copy it to your computer
4.Open IPC Search, click “Search”, you will find the device IP,
and you also can modify the IP
information, see the picture on the left:
5.Factory default IP setting:
IP Address : 192.168.1.168
Subnet Mask : 255.255.255.0
Gateway : 192.168.1.1
User name : admin
Password : admin
6.After modifying IP, click “Search”
again, you will find the new IP of the your
device. Double-click the new IP, you can access to the IPC via
IE, or enter the IP Address in the address bar of IE, then click
“Enter”, the download_OCX controls interface please see below
picture:
7.Please click here to download the OCX controls, as
is shown in the following picture:
Click run, the system will
automatically download the OCX,
click “yes” in the following picture:
Then it will install the OCX，
when complete ,the window
below will pop up:
Click ”OK” and refresh the page.
You will enter the login interface,
as is shown in the left picture:
Enter your username and
password, you can start to
access and control your IP
Camera.
5 Access to the IP Camera via Multi_window
Go to CD->find Multi_window.exe. Copy Multi_window.exe to
your computer and install it, then
run it. See below:
1.Config:Group.See below:
Here you can add your IP
Cameras and set the
Capture Path. If you forget
the IP Address, you can
click “Search” to search
your IP Cameras. You can
double click the IP info to add the camera.
You also can enter the IP Info manually in the “IPcam
Information area”
Then you can view the images and set the parameters of IP
Camera, such as Alarm, Video, Net, Camuser, Date, etc.
Please refer to Multi_window Customer Manual for detail.
2.View the images
After adding the devices, you can see the devices in “List” of
the main interface, you can double _click the device to control it
to play or stop. See below picture:
You also can control
the devices in “Camera”,
see the picture on the right:
6 Access to the IP Camera via Android mobile
Search and download the surveillance software “MEyepro” to
your mobile from electronic markets or the Mobile Assistant,
then install it. Then you can see the icon of the software
,click it to run.
1.The following picture shows the main
interface:
2.Live view
See the picture on the
right.
Click the button ”PTZ” , and you will see the PTZ function
buttons, see below picture:
Button function:
3.Device list
:Add device, Input Device name,
IP address or domain name, port,
username, password, Max Channel,
then click ”OK” to finish and save.
:Edit device. Modify Device name,
IP address or domain name, port,
username, password, Max Channel,
then click ”OK” to finish.
Button Name Button Name
Play Switch channels
Snapshot PTZ Control
Local Record Zoom
Configure Focal
PTZ Iris
About
switch/router/FOT
IPC PC1 PC2
DC12V
TSC-IP113E
Model TSC-IP113E
Image Sensor Color 1/3" SONY 1.3Megapixel Sensor
Resolution 960P@25fps,720P@25fps,D1@25fps
Minimum
Illumination 0.1Lux
S/N Ratio >50db
Focus Mode Manual
Day/Night IR cut filter with auto switch
Network 1 RJ45 Ethernet interface, 10/100M adaptation
Delay Within The LAN0.3S
Frame Rate 25 FPS ( Adjustable)
Video
Compression H.264 /JPEG
Protocol Protocols: TCP/UDP/RTSP/FTP/PPPOE/
DHCP/DDNS/NTP/UPnP/SMTP
Onvif Support Onvif 2.0
User
Permission Multi-user Classification Management
Power DC 12V/1000MA
Consumption 3.0W
Lens Board Lens 3.6mm/F2.0
IR Status IR LED: ¢5X24PCS IR range: 20M
Dimension (mm) 148(W) x65(H) x63(D)m
Weight (g) 500
Temperature -20～50℃
Humidity 0%-90%RH,Without Condensation
TSC-IP113E

:Delete device. If you want to delete the device, please
click this button, then select the device name to delete it.
4.Saved photos
Please see the picture on the right:
If you want to delete the photos, select
the photo and click “Delete” on the top right
of the interface, it will pop up a tip, click
”OK” to delete the photo.
5.Local Video
Please see the picture on the right:
Select the file to playback. If you want to
delete the videos, select the video and
click “Delete” on the top right of
the interface, it will pop up a tip,
click ”OK” to delete it.
6.About
Please see the picture on the
right:
It is the information about the
monitor software.
7 Access to the IP Camera via iPhone
Search and install the surveillance software “ASee+” on line to
your mobile from App store. Then you can see the icon of the
software click it to run.
1.The following picture shows the main interface:
You can see the PTZ
function buttons in the
tool bar, see the picture
on the right:
Button function:
2.Device list
:Add device. Input Device name, IP address or domain
name, port, username, password, Channel number, then click
”Save” to finish.
Button Name Button Name
Play Clear
Snapshot PTZ Control
Local Record Zoom
Menu Focal
Iris
:Edit the device. Modify Device name, IP address or
domain name, port, username, password, Max Channel, then
click ”Save” to finish.
:Delete device. If you want to delete the device, please
click this button, then select the device name to delete it.
3.Local files
Photos :Select the photos to view. If you want to delete the
photos, select the photo and click “Delete” on the bottom-right of
the interface, it will pop up a tip, click ”OK” to delete the photo.
Records: Select the file to playback. If you want to delete the
records, click “Edit”, click “Delete” to delete the record, then
click “Done” to finish.
4.About&Help
It is the information about the
monitor software. As is shown
in the left picture:
8 Access to the IP Camera via iPad
Search and download the surveillance software “ASee+” to
your mobile from App store and install it. Then you can see the
icon of the software ,click it to run.
1.The following picture shows the main interface:
2.Device Management
:Add device,
Input Device
name, IP address or
domain name, port,
username, password,
Max Channel, then
click ”OK” to finish and
save.
:Edit device.
Modify Device name, IP address or domain name, port,
username, password, Max Channel, then click ”OK” to finish.
:Delete device. If you want to delete the device, please
click this button, then select the device name to delete it.
3.Channel Control
 To start playback, touch the square on the on the play
screen to select （note green border on selected
square）；then double tap a channel in the list on the left
to start viewing. Double tap a camera to view in full
screen.
 While in full screen mode，swipe left or right to change
the live channel to the next/previous cam.
 Double tap again to return to multi view.
 Touch a channel on the screen and drag it to the channel
position to rearrange your viewing window. As is shown in
the following figure:
●Switch the channel viewing
mode from four to six using these
buttons on the control bar:
4.About
It is the information about
the monitor software. As
is shown in the picture on
the right:
5.Other Buttons
Button Name Button Name
Play PTZ
Snapshot PTZ Control
Local Record Zoom
System
settings Focal
4 Package List
Button Name Button Name
Iris Switch channels
Stop Clear
Photos Records
About
5 FAQ
1.Why cannot capture?
Answer: If you capture failed and the storage folder cannot
pop up automatically ,please check your IE, don’t select “Enable
protected mode”, as is shown in the following figure:
2.Why can not access the camera after update?
Answer: Clean browser cache.
Steps: open IE, click “Tools” and select “Internet Options”,
then you can see “Temporary Internet files” and click “Delete
Files”, it will prompt a dialog you need to check “Delete all
offline content” and click “OK”.
You also can click “Start” and select “Run” then enter “cmd”,
enter “arp -d” in “Command Prompt” interface. Re-access the
camera.
3.Why can not show the whole interface?
Answer: Close some options of IE.
Steps: Open IE, click ”View” and select “Toolbar”, close the
“Favorites bar”, ”Status bar” and “Command bar”.
4.Why cannot I watch the mobile surveillance video after
entering the login information?
A、Please check whether the settings page, server, port,
user name, password and other information are filled in
correctly.
B、Please check your network to see whether your phone is
connected to the external network .
C、If your device is connected to the external network via
router, please check whether the mobile port mapped in the
routing . (For mapping settings, please refer to the router
manual).
D、Please check whether the IP address you have filled in is
the LAN IP (If your IP starts with the following format, it is a local
area network : 10.xx 、172.xx、192.xx. If you use such IP, you
can only be in the same LAN with the device to be connected).
E、Please check your port to ensure that it must be the
mobile port.
5.Why does it show “Get Param Failed”?
Answer : 1.Please check the IP information, such as port.
2.Please make sure the IP Camera connected correctly.
3.The network status is poor.
6.I have already added the device, why it shows “Initial
Failed!”?
Solution: Please delete the device and add it again.
NO. Name Number (pcs)
1. HD-IP Camera 1
2. CD 1
3.
IPC Fast
Operation User
Manual
1
Model
TSC-IP113E
TSC-IP113E
TSC-IP113E