Toro TITAN User manual

FormNo.3383-520RevA
ROPSConversionKit
TITAN®Zero-Turn-RadiusRidingMower
ModelNo.130-6850
InstallationInstructions
WARNING
CALIFORNIA
Proposition65Warning
ThisproductcontainsachemicalorchemicalsknowntotheStateofCaliforniato
causecancer,birthdefects,orreproductiveharm.
Installation
LooseParts
Usethechartbelowtoverifythatallpartshavebeenshipped.
DescriptionQty.Use
Pivotbracket4
Rubberbumper2
Spacer4
Roundspacer2
Pinassembly2
Nut(5/16inch)2
InstalltheROPSParts
InstallingtheROPSParts
1.RemovetheexistingsidebracketsontheROPS.Save
thenutsandboltsforinstallingthenewbrackets.
2.Installtherubberbumperstothelowerpartofthe
ROPSwith2nuts(5/16inch)(Figure1).
3.Installthepivotbracketsandspacerstotheupperpart
oftheROPSwiththepreviouslyremovednutsand
bolts(Figure1).
4.InstalltheupperpartoftheROPS,roundspacer,and
pinassemblytothelowerpartoftheROPSwiththe
previouslyremovednutsandbolts(Figure1).
5.Torqueallnutsandboltsto40.7to49.7N-m(360to
440in-lb).
©2014—TheToro®Company
8111LyndaleAvenueSouth
Bloomington,MN55420
Registeratwww.T oro.com.OriginalInstructions(EN)
PrintedintheUSA.
AllRightsReserved*3383-520*A

Figure1
1.UpperpartoftheROPS5.Washer9.LowerpartoftheROPS
2.Rubberbumper6.Bolt10.Nut(5/16inch)
3.Spacer7.Roundspacer
4.Pivotbracket8.Pinassembly
2

Operation
UsingtheRolloverProtection
System(ROPS)
WARNING
Toavoidinjuryordeathfromrollover:keepthe
rollbarintheraisedlockedpositionandusethe
seatbelt.
WARNING
Thereisnorolloverprotectionwhentherollbaris
inthedownposition.
•Lowertherollbaronlywhenabsolutely
necessary.
•Donotweartheseatbeltwhentherollbaris
inthedownposition.
•Driveslowlyandcarefully.
•Raisetherollbarassoonasclearancepermits.
•Checkcarefullyforoverheadclearances(i.e.
branches,doorways,electricalwires)before
drivingunderanyobjectsanddonotcontact
them.
Important:Lowertherollbaronlywhenabsolutely
necessary.
1.Toraisetherollbar,removethehaircotterpinand
removethelockingpins.
2.Raisetherollbartotheuprightposition(Figure2).
G015034
Figure2
Important:Alwaysusetheseatbeltwiththeroll
barintheraisedposition.
3.Installthelockingpins.Securethepinsbyinstallingthe
haircotterpin(Figure3).
G015035
1
2
3
2
Figure3
1.HoleinROPS3.Hairpincotter
2.Lockingpin
4.Tolowertherollbar,removethehaircotterpinand
removethelockingpin(Figure3).
5.Lowertherollbartothedownposition.
6.Usethe2lockingandcotterpinstosecurethebar.
3