Toshiba TCB-LK2801DP-E User manual

3. Duct design
Arrangement
Referring to the following dimension, manufacture duct at the local site.
Below part are included.
2. Accessories
80 100 100 100 100 100 100
100
100 100 100 100 100 100 80
100
1405
302
283
(USE M4x8 32 Places)
(142) (142)
41.5
41.5
245
1346.5
CL
CL
Installation hole
Part name Form Quantity
2
1
2
2
8
4
18
1
2
1
(1) Frame fix plate
(2) Filter frame
(3) Filter
(4) Cover
(5) Screw
(6) Screw
(7) Screw
(8) Seal material
(9) Seal material
(10) Seal material
(11) Installation manual
M4 x 8L
M5 x 8L
M5 x 16L
10t x 25 x 35
10t x 20 x 25 2
This manual
Model name
1. Adaptation model
TCB-LK2801DP-E
Adaptation model
MMD-AP072*HP*, MMD-AP096*HP*
RAV-SM224*DTP*, RAV-SM280*DTP*
INSTALLATION MANUAL
AIR CONDITIONER
Long life filter Kit
Model: TCB-LK2801DP-E
Thank you for purchasing the Long life
filter Kit for TOSHIBA air conditioner.
Before starting the installation work,
please read this manual carefully and
install the product properly.

1. Peel off the tape fixing the filter rail. 4. Install (2) Filter frame.
And check if the claw of the filter rail is not taken off.
(2) Filter frame
2. Install (9) (10) Seal material. 5. Install (8) Seal material.
Fit the seal material to the corner and paste it.
(8) Seal material
3. Install (1) Frame fix plate. 6. Install (3) Filter and (4) Cover.
·For the filter direction, the insertion direction is the handle side as
the above picture.
·Please confirm that two pieces of filters are connected.
·Please attach the cover with both side.
(2) Filter frame
· The filter frame gets one having black mold parts (filter rail)
in the lower direction at the time of the installation of indoor unit.
(6) Screws M5x8 (4pcs)
(5) Screws M4x8 (4pcs)
Tape
Tape Tape
(10) Seal material
(10) Seal material
(2) Filter frame
(9) Seal material
(9) Seal material
(1) Frame fix plate
(7) Screws M5x16 (18pcs)
Tighten this screw temporarily.
After attaching the filter frame,
tighten it completely.
Stick the seal
material on the
basis of this position.
(8) Seal material
Handle (3) Filter (2pcs)
(5) Screws
M4x8 (2pcs) (4) Covers (2pcs) (5) Screws
M4x8 (2pcs)
NOTE
•When you use too long screws at attach a suction duct (local procured), you can not remove the filters
by attack the screws.
•Be sure to check if the filter can be attached and removed after the attachment.
4.How to install

5 External Pressure Loss Characteristic5. External Pressure Loss Characteristic
When you use these “Long life filter Kit”, pressure-loss characteristics depends on Air Flow.
50
60
Pa)
10
20
30
40
50
Pressure Loss (Pa)
0
10
0 600 1200 1800 2400 3000 3600 4200 4800 5400 6000
P
Air Flow (m3/h)
Long life Filter Kit, Pressure Loss Characteristics

1117898001