Quick Start Guide 2EN
CAMILEO BW10
This camcorder complies with JIS IPX8 (formerly JIS protection grade 8)
waterproof standard and can be used in water. Note, however, that
failing to heed the following precautions may result in damage or injury
that is not covered by the warranty. Please take the time to carefully
read and heed the following cautions.
NOTE
kBefore using the camcorder
iWhen closing the slot cover and terminal cover, make sure that no foreign
object such as sand, hair, dust, etc. is caught in the rubber seal.
iMake sure that the slot cover and terminal cover are completely and
securely closed to prevent water from getting inside the camcorder and
damaging it.
iPlease note that the camcorder accessories are not waterproof.
kCautions concerning use in water
iThe waterproof properties of the camcorder apply to fresh water and
saltwater only; they do not apply to cleaning substances, chemicals or
water from spas, etc. In case of a splash, immediately wipe off any
moisture.
iDo not immerse in water at a depth greater than 2.0 m (6.56 ft.).
iDo not subject the camcorder to high-pressure water.
iDo not immerse in water for longer than 60 minutes. After 60 minutes of
use in water, allow it to dry for at least 10 minutes.
iDo not immerse in water that is warmer than 40 °C (104°F).
iDo not open and close the slot cover or terminal cover when the
camcorder is wet or while it is immersed in water.
iDo not open and close the slot cover or terminal cover with wet hands.
iDo not open the slot cover or terminal cover on the beach or at the
poolside.
iDo not jolt the camcorder while it is immersed in water. Doing so may
cause the slot cover or terminal cover to open.
Important! Concerning your camcorder’s
waterproof feature
CAMILEO BW10_QSG.book Page 2 Friday, May 7, 2010 6:17 PM
Downloaded From VideoCamera-Manual.com Manuals
