Toshiba CAMILEO SX500 User manual

User’s Manual
CAMILEO SX500
CZ
DE
DK
ES
FI
FR
GR
HR
HU
IT
NL
NO
PL
PT
RS
RU
SE
SK
SL
TR
AR

EN iUser’s Manual
INTRODUCTION
Welcome and thank you for choosing a TOSHIBA product.
For your convenience, your TOSHIBA product is furnished with two guides:
a) Quick Start Guide, and
b) this comprehensive PDF User’s Manual.
Please read these instructions carefully before using the camcorder. Keep
this Manual in a safe place for later reference.
Symbols used in this manual
HINT Points giving some extended instructions or special points to pay
attention to.
CAUTION Points that require special attention.
(page xx) Refer to the page indicated for detailed information.

User’s Manual ii EN
SHOOT, PLAY BACK AND SAVE
Preparing the camcorder
1 Insert the battery pack.
2Open
3Insert the battery pack.
4Close the battery cover.
Battery cover
1Push out

EN iii User’s Manual
About the battery pack
You will find the battery pack inserted in the camcorder. When shipped from
the factory, the battery pack is inserted backwards to prevent current flow.
Before using, please re-insert the battery pack correctly as shown in the
illustration.

User’s Manual iv EN
2 Insert the SD Memory Card.
hAn SD Memory Card is not included with your camcorder. Please
purchase a commercially sold card.
hIn this manual, the SD Memory Card is referred to as the “card”.
<When removing the card...>
1Open the card slot cover. 2Insert the card.
3Close the card slot cover.
2Pull it out.
1Push the card in.

EN vUser’s Manual
Shooting
1 Press the POWER button for at
least 1 second to turn the
camcorder on.
hIf the screen to set the date
and time appears, press the
MENU button 2 times to
cancel it.
For how to set the date and
time, see page 19.
2 Record.
To record a video clip:
hPress the [ ] button to
begin recording a video clip.
hPress the [ ] button again
to end the recording.
To take a photo:
hPress the [ ] button.
hA still image is captured.
10 M -S
15 000:00:17
Full-HD
[ ] button
(Video recording button)
[ ] button
(Photo shooting button)
POWER button

User’s Manual vi EN
Playback
1 Press the play [=] button.
hThe display changes to the
Playback Screen.
2 Select the image to play back.
hUse the arrow keys to move
the orange frame to the image
you wish to play back.
hThe image information for the
framed image is shown in the
bottom part of the monitor.
3 Press the OK button.
<To return to the recording
mode>
hPress the play [=] button.
Deleting files
1 On the screen in step 2, move
the orange frame to the file you
wish to delete, and press the
MENU button.
2 Select “DELETE”, and press
the OK button.
3 Select “DELETE SINGLE”, and
press the OK button.
4 Select “DELETE”, and press
the OK button.
hIf you press [G] or [H], the
screen to delete a different file
will appear.
2010.12.24 18:41 100-0006
6.5MB 00:00:05
OK
Full-HD
SD
OK
MENU button
Remaining battery
power indication
Orange frame
Play [ = ] button
Arrow keys
Arrow keys
OK button

EN vii User’s Manual
5 When you are finished deleting files, press the MENU button.
hPressing the MENU button 3 times will return you to the screen in step
2.
When you are finished using the camcorder...
Press the POWER button for at least 1 second to turn the camcorder off.

User’s Manual viii EN
Copy data from your camcorder to the computer
Connect your camcorder to a computer, and copy the desired data to the
computer.
1 Turn on the computer, and use the supplied dedicated USB interface
cable to connect your camcorder to the computer.
hConnect the cable between the camcorder’s USB/AV terminal and the
computer’s USB connector.
2 Turn on the camcorder (page 16).
hThe USB Connection Screen appears on the camcorder’s monitor.
USB CONNECTION
COMPUTER
PRINTER
CANCEL
OKCANCEL
OK
To USB/AV terminal Supplied dedicated
USB interface cable
To USB connector

EN ix User’s Manual
3 Select “COMPUTER”, and press the OK button.
hThe screen to select the
computer connection mode
appears.
4 Select “CARD READER”, and press the OK button.
5 Copy data from your camcorder to a computer.
Dismounting the camcorder
CAUTION
iTo disconnect your camcorder, be sure to follow the procedure below.
Failure to follow this procedure may cause faulty operation of your
computer or corrupt the files in your camcorder.
1 Left-click on the icon for safely removing hardware in the task tray.
hA list appears showing the devices connected to the computer’s USB
connector.
2 Left-click on the camcorder drive (E:).
hThe camcorder can now be disconnected.
hThe drive name (E:) may be different on your computer.
HINT
About the application software
Concerning the application software, the following software is bundled in the
supplied DVD-ROM.
iArcSoft MediaImpression 2
Watch movies and organize files.
With application installed, when your camcorder is connected to your
computer in the YouTube mode, the camcorder is ready to upload to
YouTube.
iMAGIX Movie Edit Pro 15 Plus Trial
For editing movies. 30-day trial version.
OK
USB CONNECTION
CARD READER
You Tube
MTP
CANCEL
OK