Toshiba Canvio AeroCast Use and care manual

Canvio AeroCast
Firmware update manual
EN
FR (Canada)
CZ
DE
DK
ES
FI
FR
GR
HR
HU
IT
NL
NO
PL
PT
RS
RU
SE
SK
SL
TR
AR
한국어
繁体字

EN-1
Canvio AeroCast
Firmware update manual
1 Introduction
This manual contains information for firmware update of the Canvio AeroCast.
Please be sure to download this manual to your PC or Mac and read carefully before
downloading firmware.
This manual has been written based on the following rules:
Meaning of symbols
Indicates practices that may cause property damage and other
problems, but not personal injury.
Trademarks
Mac is a trademark of Apple Inc.
All company names, product names, and service names mentioned herein may
be trademarks of their respective companies.

EN-2
2 Firmware update procedure
This section describes firmware update procedure.
Firmware updates may result in loss of ALL data and we recommend you back up
important and necessary data before updating the firmware.
Update the Canvio AeroCast firmware correctly by following the instructions.
1. Download the “firmware.bin”file to your Windows PC or Mac.
2. Make sure the CANVIO AeroCast is powered OFF.
3. Connect the Canvio AeroCast to your Windows PC or Mac using the attached
USB cable.

EN-3
4. Copy the downloaded “firmware.bin”file from your Windows PC or Mac to
the root directory of the Canvio AeroCast”.
(e.g. (TOSHIBA_EXT) E:\firmware.bin)
5. After file copy is completed, execute safety remove the drive.
e.g. In case of Windows PC, click the Safety Remove Hardware icon on the
taskbar, and select the “TOSHIBA EXT”.
e.g. In case of Mac, drag the “TOSHIBA EXT”icon on the desktop to the
Trash.
6. Unplug the Canvio AeroCast from your Windows PC or Mac.
7. Plug the AC adapter to a power outlet, then plug the USB cable from AC
adapter to the Canvio AeroCast.

EN-4
8. Charge the Canvio AeroCast until it is fully charged.
(Battery indicator light will stop blinking if the Canvio AeroCast is fully
charged.)
9. Press the ON/OFF button to power on the Canvio AeroCast.
10. Click the Network icon in your Windows PC or Mac, and connect to the
Canvio AeroCast wirelessly. (Displayed SSID is “Toshiba_whdd_****”.
(**** are unique digits or characters.))
11. Open the web browser on your PC or Mac, and input “10.10.10.254”on the
address bar.