Toshiba DB-EA4D Release note

TOSHIBA 2ST Label Printer
DB-EA4D
Printer Driver Manual
First Edition: April 27, 2012

This document describes the precautions for using the 2ST Label Printer Windows Printer
Driver.
This document assumes that the reader is familiar with the following:
General characteristics of Windows and Windows printer driver
General characteristics of 2ST Label Printer
Notes:
All rights reserved. It is prohibited to use or duplicate a part or whole of this document
without the permission of TOSHIBA TEC SINGAPORE PTE LTD.
This document is subject to change without prior notice.
* Microsoft, Windows, Windows NT, Windows 2000, Windows XP and Windows 7 are
registered trademarks of Microsoft Corporation in the United States and/or other
countries.
The official name of Windows is the “Microsoft Windows Operating System”.

Table of Content
1. System Requirement..................................................................1
2. Driver Installation guide............................................................2
2.1. Installation for Windows 7(32-bit, 64-bit).......................................................... 2
2.2. Hardware Wizard.............................................................................................. 20
2.3. Update Driver.................................................................................................... 21
3. Printer Properties and Settings ................................................25
3.1. Printer Configuration........................................................................................ 25
3.2. Printer Status..................................................................................................... 33
3.3. Device Setting................................................................................................... 36
3.4. Document Printing............................................................................................ 42
4. Un-installation of Printer Driver..............................................48

2ST Label Printer - Windows Driver User’s Manual
- 1 -
1. System Requirement
OS: Windows XP Professional (English) / 7(32bit, 64bit)(English)
Language: English
Printer I/F: USB (Printer Class)
LAN (TCP/IP)
Parallel (Option)

2ST Label Printer - Windows Driver User’s Manual
- 2 -
2. Driver Installation guide
2.1. Installation for Windows 7(32-bit, 64-bit)
2.1.1. Installation on USB I/F
Plug printer on USB I/F and turn it on, before running installer.
You'll see "Unspecified" icon named "DB-EA4D" as shown below.
After this, run your printer driver's package to unpack and start installation.

2ST Label Printer - Windows Driver User’s Manual
- 3 -
Select "I accept…" and click "Next >".
Specify the directory to unpack and click "Next >".

2ST Label Printer - Windows Driver User’s Manual
- 4 -
Click "Finish" to start unpacking drivers and "Driver Wizard" will run
automatically as shown below.
Select "Install printer drivers" and click "Next >".

2ST Label Printer - Windows Driver User’s Manual
- 5 -
Select "Install a driver for a Plug and Play printer” and click "Next >" to
proceed installation.
Specify "Printer name" and select "Do not share…" and click "Next >".

2ST Label Printer - Windows Driver User’s Manual
- 6 -
Click "Finish" to begin installation process.

2ST Label Printer - Windows Driver User’s Manual
- 7 -
You'll see this warning, please click "Install" to proceed.
Printer driver for "TOSHIBA DB-EA4D" is installed, click "Close" to complete.

2ST Label Printer - Windows Driver User’s Manual
- 8 -
After installation, you'll see below "TOSHIBA DB-EA4D" icon in the "Devices
and Printers" folder.

2ST Label Printer - Windows Driver User’s Manual
- 9 -
2.1.2. Installation on Parallel I/F
Run your printer driver's package to unpack and start installation.
Select "I accept…" and click "Next >".

2ST Label Printer - Windows Driver User’s Manual
- 10 -
Specify the directory to unpack and click "Next >".
Click "Finish" to start unpacking drivers and "Driver Wizard" will run
automatically as shown below.

2ST Label Printer - Windows Driver User’s Manual
- 11 -
Select "Install printer drivers" and click "Next >".
Select "TOSHIBA DB-EA4D" and click "Next >".

2ST Label Printer - Windows Driver User’s Manual
- 12 -
Select "LPT1:" and click "Next >".
Specify "Printer name" and select "Do not share…" and click "Next >".

2ST Label Printer - Windows Driver User’s Manual
- 13 -
Click "Finish" to begin installation process.
Printer driver for "TOSHIBA DB-EA4D" is installed, click "Close" to complete.

2ST Label Printer - Windows Driver User’s Manual
- 14 -
2.1.3. Installation on Ethernet
Follow the same install operation as " Installation on Parallel I/F" until you see
the dialog to specify port as shown below.
If you have no TCP/IP Port which has same IP Address as printer has, click
"Create Port…".
Select "Standard TCP/IP Port" and click "New Port…".

2ST Label Printer - Windows Driver User’s Manual
- 15 -
Click "Next >".
Specify the IP address with which printer is configured and click "Next >".

2ST Label Printer - Windows Driver User’s Manual
- 16 -
Click "Next >".
Click "Finish" to complete the wizard.

2ST Label Printer - Windows Driver User’s Manual
- 17 -
Click "Close".
Make sure the new port is created and click "Next >".
After this, follow the same operations as "Installation on Parallel I/F".