Toshiba 32WL66A User manual

SERVICE MANUAL
LCD Color Television
32WL66A
32WL66E
32WL66R
32WL66T
FILE NO. 060-200601GR
Published in Japan, Apr. 2006 (YC)
TOSHIBA CORPORATION, 2006
The above models are classied as green products (*1), as indicated by the underlined serial numbers.
This Service Manual describes replacement parts for the green products. When repairing these green
products, use the parts described in this manual and lead-free solder (*2).
For (*1) and (*2), see the next page.

- 2 -
(*1) GREEN PRODUCT PROCUREMENT
The EC is actively promoting the WEEE & RoHS Directives that define standards for recycling
and reuse of Waste Electrical and Electronic Equipment and for the Restriction of the use
of certain Hazardous Substances. From July 1, 2006, the RoHS Directive will prohibit any
marketing of new products containing the restricted substances.
Increasing attention is given to issues related to the global environmental. Toshiba Corporation
recognizes environmental protection as a key management tasks, and is doing its utmost to
enhance and improve the quality and scope of its environmental activities. In line with this,
Toshiba proactively promotes Green Procurement, and seeks to purchase and use products,
parts and materials that have low environmental impacts.
Green procurement of parts is not only confined to manufacture. The same green parts used in
manufacture must also be used as replacement parts.
(*2) LEAD-FREE SOLDER
This product is manufactured using lead-free solder as a part of a movement within the
consumer products industry at large to be environmentally responsible. Lead-free solder must
be used in the servicing and repair of this product.
WARNING
This product is manufactured using lead free solder.
DO NOT USE LEAD BASED SOLDER TO REPAIR THIS PRODUCT !
The melting temperature of lead-free solder is higher than that of leaded solder by 86°F to
104°F (30°C to 40°C). Use of a soldering iron designed for lead-based solders to repair product
made with lead-free solder may result in damage to the component and or PCB being soldered.
Great care should be made to ensure high-quality soldering when servicing this product 
especially when soldering large components, through-hole pins, and on PCBs as the level of
heat required to melt lead-free solder is high.
TABLE OF CONTENTS
SERVICE INSTRUCTIONS .................................................................................................................................................... 3
HANDLING THE LCD MODULE ............................................................................................................................................ 5
SERVICE MODE .................................................................................................................................................................... 7
LOCATION OF CONTROLS................................................................................................................................................. 14
LAYOUT OF MAJOR BOARDS ............................................................................................................................................ 17
PACKING EXPLODED VIEW ............................................................................................................................................... 18
CHASSIS AND CABINET REPLACEMENT PARTS LIST.................................................................................................... 19
PC BOARDS TOP & BOTTOM VIEW................................................................................................................................... 28
CIRCUIT BLOCK DIAGRAM ................................................................................................................................................ 34
SPECIFICATIONS ................................................................................................................................................................ 35
APPENDIX:
SCHEMATIC DIAGRAM

- 3 -
32WL66A/E/R/T
– 3 –
GENERAL ADJUSTMENTS
SPECIFIC INFORMATIONS
SERVICE SAFETY PRECAUTIONS
• The caution items shown here describe major safety issues and should always be observed.
• The meanings of the various indications are as follows.
WARNING
CAUTION
Indicates a hypothetical situation in which service personnel and nearby third parties, or even
end users due to a product defect after the service operation is completed, could possibly be in
danger of injury or even death in the event of operational error.
Indicates a hypothetical situation in which service personnel and nearby third parties, or even
end users after the service operation is completed, could possibly be in danger of injury, or
where there could be physical damage in the event of operational error.
* Physical damage means major damage to a home, furnishings and other possessions.
Examples of marks
SHOCK HAZARD
PROHIBIT DISASSEM-
BLING
UNPULUG
The
"
indicates caution (including danger and warning).
The actual meaning of this caution is indicated inside the
"
or nearby illustrations or text.
The example shown to the left indicates the danger of "electrical shock".
The indicates a forbidden action.
The actual meaning of this caution is indicated inside the or nearby illustrations or text.
The example shown to the left indicates that disassembly is forbidden.
The -indicates a forced action (an action that must be performed).
The actual meaning of this forced action is indicated by -or nearby illustrations or text.
The example shown to the left indicates that the power plug must be disconnected.

- 4 -
32WL66A/E/R/T
- 4 -
GENERAL ADJUSTMENTS
SPECIFIC INFORMATIONS
WARNING
KEEP CHILDREN
AWAY
UNPULUG
SHOCK HAZARD
USE SPECIFIED
PARTS
CAUTION FOR
WIRING
CAUTION FOR
ASSEMBLING /
WIRING
CHECK INSULATION
RESISTANCE
PROHIBIT
REMODELING
• Always advise users to keep children away.
There is danger of injury to children from tools, disassembled products, etc.
• Always disconnect the power plug before starting work whenever power is not required.
Failure to disconnect the power plug before starting work can result in electrical shock.
• Depending on the model, use an insulation transformer or wear gloves when servicing with the
power on, and disconnect the power plug to avoid electrical shock when replacing parts.
In some cases, alternating current is also impressed in the chassis, so electrical shock is pos-
sible if the chassis is contacted with the power on.
• Always use the replacement parts specified for the particular model when making repairs.
The parts used in products have the necessary safety characteristics such as inflammability,
voltage resistance, etc.; therefore, use only replacement parts that have these same character-
istics.
Use only the specified parts when the mark is included in a circuit diagram or parts list.
• Parts mounting and routing of the wiring should be the same as that used originally.
For safety purposes, insulating materials such as tubing or tape is sometimes used and printed
circuit boards are sometimes mounted floating.
Also make sure that wiring is routed and clamped to avoid parts that generate heat and which
use high voltage. Always follow the original scheme.
• After a repair has been completed, reassemble all disassembled parts, and route and recon-
nect the wiring, in accordance with the original scheme.
Do not allow internal wiring to be pinched by cabinets, panels, etc.
Any error in reassembly or wiring can result in electrical leakage, flame, etc., and may be
hazardous.
• After completing the work, disconnect the power plug from the outlet, remove the antenna, turn
on the power switch. Then, use a 500V insulation resistance meter to check the insulation
resistance of the antenna terminal, other metallic parts and between the prongs of the power
plug to make sure that the insulation resistance is 1M 1 or more.
The set will require inspection and repair if the insulation resistance is below this value.
• Never remodel the product in any way.
Remodeling can result in improper operation, malfunction, or electrical leakage and flame,
which may be hazardous

- 5 -
32WL66A/E/R/T
– 5 –
GENERAL ADJUSTMENTS
SPECIFIC INFORMATIONS
HANDLING THE LCD MODULE
Safety Precautions
In the event that the screen is damaged or the liquid crystal
(fluid) leaks, do not breathe in or drink this fluid. Also, never
touch this fluid.
Such actions could cause toxicity or skin irritation. If this fluid
should enter the mouth, rinse the mouth thoroughly with wa-
ter. If the fluid should contact the skin or clothing, wipe off
with alcohol, etc., and rinse thoroughly with water. If the fluid
should enter the eyes, immediately rinse the eyes thoroughly
with running water.
Precautions for Handling the LCD Module
The LCD module can easily be damaged during disassembly
or reassembly; therefore, always observe the following pre-
cautions when handling the module.
1. When attaching the LCD module to the LCD cover, posi-
tion it appropriately and fasten at the position where the
display can be viewed most conveniently.
2. Carefully align the holes at all four corners of the LCD
module with the corresponding holes in the LCD cover
and fasten with screws. Do not strongly push on the mod-
ule because any impact can adversely affect the perform-
ance. Also use caution when handling the polarized screen
because it can easily be damaged.
CAUTION The metal edges of the LCD module
are sharp, so use caution to avoid in-
jury.
3. If the panel surface becomes soiled, wipe with cotton or a
soft cloth. If this does not remove the soiling, breathe on
the surface and then wipe again.
If the panel surface is extremely solied, use a CRT cleaner
as a cleaner. Wipe off the panel surface by drop the cleaner
on the cloth. Do not drop the cleaner on the panel. Pay
attention not to scratch the panel surface.
4. Leaving water or other fluids on the panel screen for an
extended period of time can result in discoloration or
stripes. Immediately remove any type of fluid from the
screen.
5. Glass is used in the panel, so do not drop or strike with
hard objects. Such actions can damage the panel.
6. CMOS-LSI circuitry is used in the LCD module, so avoid
damage due to static electricity. When handling the mod-
ule, use a wrist ground or anchor ground.

- 6 -
32WL66A/E/R/T
- 6 -
GENERAL ADJUSTMENTS
SPECIFIC INFORMATIONS
7. Do not expose the LCD module to direct sunlight or strong
ultraviolet rays for an extended period of time.
8. Do not store the LCD module below the temperature con-
ditions described in the specifications. Failure to do so
could result in freezing of the liquid crystal due to cold air
or loss of resilience or other damage.
9. Do not disassemble the LCD module. Such actions could
result in improper operation.
10. When transporting the LCD module, do not use packing
containing epoxy resin (amine) or silicon resin (alcohol or
oxim). The gas generated by these materials can cause
loss of polarity.

- 7 -
32WL66A/E/R/T
CAUTION : Never try to perform initialization unless you have changed the memory IC.
SERVICE MODE
1. ENTERING SERVICE MODE
1) Press button once on 2) Press button again and 3) While pressing the button,
Remote Control. keep pressing.
press MENU button on TV set.
(Service mode display)
2. DISPLAYING THE ADJUSTMENT MENU
1) Press MENU button on TV.
Service mode Adjustment mode
3. KEY FUNCTION IN THE SERVICE MODE
The following key entry during display of adjustment menu provides special functions.
Test signal selection : button (on Remote)
Selection of the adjustment items : Channel ▲/▼(on TV or Remote)
Change of the data value : Volume +/−(on TV or Remote)
Adjustment menu mode ON/OFF : MENU button (on TV)
Initialization of the memory (QA02) : CALL +Channel button onTV(▲)
Reset the count of operating protect
circuit to "00" : CALL +Channel button on TV (▼)
"RCUT" selection : 1 button
"GCUT" selection : 2 button
"BCUT" selection : 3 button
"CNTX" selection : 4 button
"COLC" selection : 5 button
"UVTT" selection : 6 button
Automatic A/D Adjustment
(PC, Component, Composite [PAL, NTSC]) : 7 button
Self diagnostic display ON/OFF : 9 button
or Sound Mute
S
ADDR DATA BINARY
0000H 00H 00000000B
S
ADDR DATA BINARY
0000H 00H 00000000B
S
Press
Press

- 8 -
32WL66A/E/R/T
Signals Picture
• Red raster
• Green raster
• Blue raster
• All Black
• All White
R
All BlackAll White
BSignal off G
4. SELECTING THE ADJUSTING ITEMS
1) Every pressing of CHANNEL ▲button in the service mode changes the adjustment items in the order of table-1.
(▼button for reverse order)
5. ADJUSTING THE DATA
1) Pressing of VOLUME +/– button will change the value of data in the range from 00H to FFH. The variable
range depends on the adjusting item.
6. EXIT FROM SERVICE MODE
1) Pressing POWER button to turn off the TV once.
nINITIALIZATION OF MEMORY DATA (QA02)
After replacing QA02, the following initialization is required.
1. Enter the service mode, then select any register item.
2. Press and hold the CALL button on the Remote, then press the CHANNEL ▲button on the TV. The initialization of
QA02 has been complated.
3. Check the picture carefully. If necessary, adjust any adjustment item above.
Perform “Auto tune” on the owner’s manual.
CAUTION: Never attempt to initialize the data unless QA02 has been replaced.
7. TEST SIGNAL SELECTION
1) Every pressing of button on the Remote Control changes the built-in test patterns on screen as described
below in SERVICE MODE.

- 9 -
32WL66A/E/R/T
8. SELF DIAGNOSTIC FUNCTION
1) Press “9” button on Remote Control during display of adjustment menu in the service mode.
The diagnosis will begin to check if interface among IC’s is executed properly.
2) During diagnosis, the following displays are shown.
Self check
Firmware : WL66_ASIA_0326
Time : 000000
Bus line : OK
Bus cont : CXA2189Q(90H)
Block : UV V1 V2 V3 V4 V5
V6 V7 V8 V9 PC YUV DTV





Firmware :
Version information of microprocessor
In case of file name : WL66_ASIA and Version : 0326 indicates[WL66_ASIA_0326]. (This may differ among the destination)
Time : Total hour of turn the TV on. (Unit : H)
Bus line : --"OK" is normal
"SCL-GND"(Red indication) : SCL-GND short circuit
"SDA-GND"(Red indication) : SDA-GND short circuit
"SDA-SCL"(Red indication) : SDA-SCL short circuit
Bus cont : --- "OK" is normal.
NG is abnormal(Red indication).
When type name of semiconductor indicates.
Block
UV : TV reception mode
V1-V9 : VIDEO 1-9 input mode
PC : PC mode
YUV : YUV mode
DTV : DTV mode
UV RF
V1 1
(Composite/Component)
V2 2
(S-VIDEO)
V3 3
(Component)
V4 HDMI
V5 -
V6 -
V7 -
V8 -
V9 -
PC PC
YUV -
DTV -
WL66A,E,R,T
This may differ among the destination.

- 10 -
32WL66A/E/R/T
9. VERSION CHECK MODE
1) Press “9” button twice on Remote Control during display of adjustment menu in the service mode. The version of main
MPU will begin to check.
2) During Version Check, the following displays are shown.
MAIN MPU :
Version information of microprocessor
In case of file name : WL66_ASIA, Version 0326 for Code Program Version and (A01)
for OSD Version indicates [WL66_ASIA_0326(A01)] (This may differ among the destination)
EEPROM :
Version information of EEPROM : Display 1 byte data.
SUB MPU :
Version information of SUB MPU : Display 1 byte data.
OPTION :
Option information : Display six numbers of 1 byte data.
HDMI ID :
HDMI ID information : Display 4 byte data.
SW Ver
Version information of DB software. (Only digital model)
MW Ver
Version information of DB software middleware. (Only digital model)
A/D Adjust
A/D adjustment item.
-COMP : Component input
-PC : PC input
-NTSC : NTSC(60Hz)SD signal (composite input).
-PAL : PAL(50Hz)SD signal (composite input).
-OK : A/D adjustment set correctly.
-NG : A/D adjustment set incorrect.
rLCD Panel Vender information display
The following Panel Vender and screen size are displayed.
Example : AUO-32 indicates that Vender is AUO and Screen Size is 32 inch.
Panel Vender Screen Size(Inch)
LPL
SHP
CMO
AUO
-26
-32
-37
-42
-47
Version check
MAIN MPU : WL66_ASIA_0326(A01)
EEPROM : 01
SUB MPU : 02(NO RTC)
OPTION : 00 11 22 33 44 55
HDMI ID : 11223344
DB SW Ver : 1.0
DB MW Ver : 2.0
A/D Adjust : COMP PC NTSC PAL
OK NG OK NG
AUO-32








This may differ among the destination.
r

- 11 -
32WL66A/E/R/T
10. STATUS CHECK MODE
1) Press “9” button thrice on Remote Control during display of adjustment menu in the service mode. The status of this
model will begin to check.
2) During Status Check, the following displays are shown.
MAIN :
Main source information :
Display RF position number (0 - 99) on the main screen, or Input Source (EXT1/2/3/HDMI etc.)
MAIN FORMAT :
Display Video and PC format information
MAIN PLL :
Main PLL information : Display 1 byte data at five.
SUB :
Sub source information :
Display RF position number (0 - 99) on the Sub screen, or Input Source (EXT1/2/3/HDMI etc.)
This item displays only Double window model.
SUB FORMAT :
Display Video and PC format information
This item displays only Double window model.
SUB PLL :
Sub PLL information : Display 1 byte data at five.
This item displays only Double window model.
SCREEN SIZE :
Display the screen size as follows.
OTHER STATUS :
Other status information : Display three numbers of 2 byte data.
Exact Scan
Wide
Super Live 2
Cinema 2
4:3
Super Live 1
Cinema 1
Subtitle
14:9
Status check
MAIN : EXT1
MAIN FORMAT : 1080i-60
MAIN PLL : C6 38 54 CE 08
SUB : 11
SUB FORMAT : 576i
SUB PLL : C6 38 54 CE 08
SCREEN SIZE : Super live
OTHER STATUS : 0000 0000 0000









- 12 -
32WL66A/E/R/T
11. SETTING HOTEL MODE
Enter to service mode and select Hotel Mode menu by pressing P▲or P▼.
After selecting Hotel Mode, press +to enter details setting in Hotel Mode.
To select menu, press P▲or P▼and press OK to enter the adjustment menu of OPT2.
To move the cursor in the adjustment, press +or −.
(1) By pressing P▲or P▼, OPT2 setting will change the value either 1 or 0 on selected items as follows;
OPT2 FUNCTION DESCRIPTION 1 0 (Normal)
D7 (bit7) POS1 stored program will appear POS1 in forced Disable
in forced when turn ON the main power.
D6 (bit6) VIDEO1 stored program will appear VIDEO1 in forced Disable
in forced when turn ON the main power.
D5 (bit5) FRONT Key Disable Enable
D4 (bit4) Front keys except input selector key Disable Enable
(Video/TV)
D3 (bit3) User Remote Control operation Disable Enable
(Service mode and
Super User mode may
possible to setting only)
D2 (bit2) Language display except SETUP MENU Disable Enable
language (tuning adjustment etc.)
Display the language only
D1 (bit1) SETUP MENU Disable Enable
D0 (bit0) HOTEL Mode On (Enable the setting Off (Normal)
of D1 to D7)

- 13 -
32WL66A/E/R/T
12. SETTING & ADJUSTING DATA
[SERVICE MODE]
ADJUSTING ITEMS AND DATA IN THE SERVICE MODE:
Item Name of adjustment ASIA ASIA
Preset Data
Item Name of adjustment
Preset Data
RCUT R CUT OFF
GCUT G CUT OFF
BCUT B CUT OFF
RDRV R DRIVE
GDRV G DRIVE
BDRV B DRIVE
BRTC BRIGHTNESS CENTER
COLC COLOR CENTER
UVTT BASE BAND TINT
CNTX CONTRAST MAX
00H
00H
00H
7AH
80H
88H
05H
C8H
04H
90H
00HOPT2 TV SET OPTION 2
7FH
VOLUX MAX VOLUME LIMITED
14H
03H
0FH
05H
14H
04H
PLLW0
PLLW1
PLLW2
PLLW3
PLLW4
PLLW5 PLL WAIT TIME
PLL WAIT TIME
PLL WAIT TIME
PLL WAIT TIME
PLL WAIT TIME
PLL WAIT TIME
(HOTEL MODE)
Table-1
Note:
The image system data of RCUT-BDRV is different by each image format.
The PAL value is indicated in the table.
Never adjust H.POS and V.POS except PAL/WIDE mode.
13. LED indications
The Green and Red LEDs on the TV (at the bottom center of the TV) indicate the TV’s status, as
described below.
· Red ON (solid) and Green OFF = The TV power cord is plugged in.
· Green ON (solid) and Red ON = The On timer is operating.
LED Indication Condition Solution
1Green is OFF;
Red blinks continuously
at 0.5-second intervals.
Abnormal operation Turn OFF the TV and unplug the power
cord.
Plug the power cord in again and turn
ON the TV.
2Green is OFF;
Red blinks continuously
at 1-second intervals.
Abnormal operation of BUS line. Turn OFF the TV and unplug the power
cord.
Plug the power cord in again and turn
ON the TV.

- 14 -
32WL66A/E/R/T
LOCATION OF CONTROLS
TV top and front panel controls
5
TV top view
12 3 4
TV front view
You can swivel the TV screen.
Swivel angle: 15 degrees to
left and right.
6
987
1o(Input source selection) — When no menu is on-
screen, this button selects the input source.
OK — When a menu is on-screen, this button functions
as the next menu navigation button.
2MENU — Press to access the menu system.
32– + (Volume) — When no menu is on-screen, these
buttons adjust the volume level.
I i (MENU left/right) — When a menu is on-screen,
these buttons function as left/right menu navigation
buttons or adjust settings.
4pBb (Program position) — When no menu is on-
screen, these buttons select the program position.
Uu (MENU up/down) — When a menu is on-screen,
these buttons function as up/down menu navigation
buttons.
51(Power on/Standby) — Press to turn the TV on/
standby.
6!(Power switch) — Press to turn the TV on and off.
7(Remote sensor) — Point the remote control toward
this remote sensor.
8/(Power LED) — Power indicator.
94(Green LED) — Timer indicator.

- 15 -
32WL66A/E/R/T
TV side and back panel connections
TV back view
Cable holder
Power cord
Right side view
Headphones
(Not supplied)
15
14
10
11
12
13
18
16 17
10 OMONITOR (output terminals) — Standard video
and standard audio outputs.
11 o(3) (Video 3 input terminals) — High-definition
component video and standard audio inputs.
12 oPC/HDMI (AUDIO) (input terminals) — For use
when connecting a personal computer (PC) or a DVI
device with standard audio output.
13 o(1) (Video 1 input terminals) — High-definition
component video or standard (composite) video and
standard (analog) stereo audio inputs.
14 o(2) (Video 2 input terminals) — Optional S-video
or standard video and standard audio inputs.
15 D(Headphone jack) — For use with headphones.
Note:
When the Headphone jack is being used, the sound from
all speakers will be muted, and normal sound will be
output to the headphones only.
16 A(Antenna input terminal) — Analog antenna signal
input.
17 oRGB/PC (input terminal) — For use when
connecting a personal computer (PC).
18 oHDMI (input terminal) — High-Definition
Multimedia Interface input receives digital audio and
uncompressed digital video from an HDMI device or
uncompressed digital video from a DVI device.

- 16 -
32WL66A/E/R/T
Learning about the remote control
Location of controls
To return to the previous program
Teletext on/off
Picture mode selection
Picture still
Stereo/bilingual selection
MENU
•CALL
• Initial/index function for Teletext
• Menu I i
• Volume – +
(These buttons adjust the volume level.)
OK
Power on/Standby
Number buttons (0-9)
• Input source selection
(O1 - O3, HDMI, PC)
Picture size selection
EXIT
• Menu U u
• Program position Bb
• Teletext Bb
Bass boost on/off
Sound mute
(This button turns off/on the sound.)
• To access sub-pages
when in teletext
To enlarge teletext display size
To reveal concealed text
when in teletext
To hold a wanted page
when in teletext
• To select a page while viewing a
normal picture when in teletext
• To select the time display
Teletext control buttons
(Four colored buttons: Red, Green,
Yellow, Blue)

- 17 -
32WL66A/E/R/T
LAYOUT OF MAJOR BOARDS
LOWB
AC SW
U01B
LOWB
U01A
POWER
U02A
AV_TERM
U02B
FRONT AV
U02E
AC SW
U02D
KEY
U02C
LED
U03
SIGNAL

- 18 -
32WL66A/E/R/T
PACKING EXPLODED VIEW
A702B
A702B
A702A
A702A
Y130Y170
Y101K
Y101J
Y101H
Y101A
Y101M
A701
A709
Y109

Location Parts No. Description
No.
Location Parts No. Description
No.
WARNING: BEFORE SERVICING THIS CHASSIS, READ THE “SERVICE SAFETY PRECAUTIONS” ON PAGE 4
OF THIS MANUAL.
CAUTION: The international hazard symbols " " in the schematic diagram and the parts list designate compo-
nents which have special characteristics important for safety and should be replaced only with types identical to
those in the original circuit or specified in the parts list. The mounting position of replacements is to be identical with
originals. Before replacing any of these components, read carefully the SERVICE SAFETY PRECAUTIONS. Do not
degrade the safety of the receiver through improper servicing.
NOTICE:
•The part number must be used when ordering parts, in order to assist in processing, be sure to include the Model
number and Description.
•The PC board assembly with ∗mark is no longer available after the end of the production.
CHASSIS AND CABINET REPLACEMENT PARTS LIST
Model : 32WL66A/32WL66E/32WL66R/32WL66T
Capacitors.............. CD : Ceramic Disk PF : Plastic Film EL : Electrolytic
Resistors................ CF : Carbon Film CC : Carbon Composition MF : Metal Film
OMF : Oxide Metal Film VR : Variable Resistor FR : Fusible Resistor
(All CD and PF capacitors are ±5%, 50V and all resistors, ±5%, 1/6W unless otherwise noted.)
- 19 -
32WL66A/E/R/T
#1:[32WL66A]
#2:[32WL66E]
#3:[32WL66R]
#4:[32WL66T]
CAPACITORS
C101 76109103 CERAMIC CHIP, 50V B 0.01UF K
C102 #1 76793471 ELECTROLYTIC, 10V 470UF M
#2 76793471 ELECTROLYTIC, 10V 470UF M
#3 76762471 ELECTROLYTIC, 10V 470UF M
#4 76793471 ELECTROLYTIC, 10V 470UF M
C103 76109102 CERAMIC CHIP, 50V B 1000PF K
C104 #1 76206479 ELECTROLYTIC, 50V 4.7UF M
#2 76206479 ELECTROLYTIC, 50V 4.7UF M
#3 76766479 ELECTROLYTIC, 50V 4.7UF M
#4 76206479 ELECTROLYTIC, 50V 4.7UF M
C105 #1 76793471 ELECTROLYTIC, 10V 470UF M
#2 76793471 ELECTROLYTIC, 10V 470UF M
#3 76762471 ELECTROLYTIC, 10V 470UF M
#4 76793471 ELECTROLYTIC, 10V 470UF M
C110 76109102 CERAMIC CHIP, 50V B 1000PF K
C111 76109102 CERAMIC CHIP, 50V B 1000PF K
C114 76105180 CERAMIC CHIP, 50V CH 18PF J
C115 76105180 CERAMIC CHIP, 50V CH 18PF J
C117 76109103 CERAMIC CHIP, 50V B 0.01UF K
C118 76109103 CERAMIC CHIP, 50V B 0.01UF K
C162 76105101 CERAMIC CHIP, 50V CH 100PF J
C164 76100103 CERAMIC CHIP, 50V F 0.01UF Z
C190 76092730 CERAMIC CHIP, 16V B 0.1UF K
C191 76092789 CERAMIC CHIP, 6.3V B 1UF K
C192 76109103 CERAMIC CHIP, 50V B 0.01UF K
C414 #1 76203470 ELECTROLYTIC, 16V 47UF M 7L 3A
#2 76203470 ELECTROLYTIC, 16V 47UF M 7L 3A
#3 76794470 ELECTROLYTIC, 16V 47UF M
#4 76203470 ELECTROLYTIC, 16V 47UF M 7L 3A
C415 76100104 CERAMIC CHIP, 25V F 0.1UF Z
C416 76092731 CERAMIC CHIP, 16V B 1UF K
C417 76109221 CERAMIC CHIP, 50V B 220PF K
C419 76109222 CERAMIC CHIP, 50V B 2200PF K
C457 76092731 CERAMIC CHIP, 16V B 1UF K
C458 76100104 CERAMIC CHIP, 25V F 0.1UF Z
C459 76105220 CERAMIC CHIP, 50V CH 22PF J
C460 76109221 CERAMIC CHIP, 50V B 220PF K
C461 76109152 CERAMIC CHIP, 50V B 1500PF K
C462 76109222 CERAMIC CHIP, 50V B 2200PF K
C463 76092730 CERAMIC CHIP, 16V B 0.1UF K
C465 76109152 CERAMIC CHIP, 50V B 1500PF K
C601 76092730 CERAMIC CHIP, 16V B 0.1UF K
C602 76109331 CERAMIC CHIP, 50V B 330PF K
C603 76092730 CERAMIC CHIP, 16V B 0.1UF K
C604 76109103 CERAMIC CHIP, 50V B 0.01UF K
C605 76109103 CERAMIC CHIP, 50V B 0.01UF K
C606 76092611 CERAMIC CHIP, 6.3V B 2.2UF K
C608 76092730 CERAMIC CHIP, 16V B 0.1UF K
C610 76092731 CERAMIC CHIP, 16V B 1UF K
C611 76092730 CERAMIC CHIP, 16V B 0.1UF K
C613 76092731 CERAMIC CHIP, 16V B 1UF K
C614 76092730 CERAMIC CHIP, 16V B 0.1UF K
C620 76092463 CERAMIC CHIP, 16V B 0.22UF K
C621 76092730 CERAMIC CHIP, 16V B 0.1UF K
C622 76092463 CERAMIC CHIP, 16V B 0.22UF K
C623 76092463 CERAMIC CHIP, 16V B 0.22UF K
C624 76092730 CERAMIC CHIP, 16V B 0.1UF K
C625 76092463 CERAMIC CHIP, 16V B 0.22UF K
C627 76092730 CERAMIC CHIP, 16V B 0.1UF K
C629 #1 76073081 ELECTROLYTIC, 50V 1UF M
#2 76073081 ELECTROLYTIC, 50V 1UF M
#3 76669010 ELECTROLYTIC, 50V 1UF M
#4 76073081 ELECTROLYTIC, 50V 1UF M
C630 76092730 CERAMIC CHIP, 16V B 0.1UF K
C635 #1 76073039 ELECTROLYTIC, 16V 220UF M 3A
#2 76073039 ELECTROLYTIC, 16V 220UF M 3A
#3 76666221 ELECTROLYTIC, 16V 220UF M
#4 76073039 ELECTROLYTIC, 16V 220UF M 3A
C636 #1 76073039 ELECTROLYTIC, 16V 220UF M 3A
#2 76073039 ELECTROLYTIC, 16V 220UF M 3A
#3 76666221 ELECTROLYTIC, 16V 220UF M
#4 76073039 ELECTROLYTIC, 16V 220UF M 3A
C640 76092738 CERAMIC CHIP, 25V B 0.47UF K
C641 76092738 CERAMIC CHIP, 25V B 0.47UF K
C642 76285104 CERAMIC CHIP, 50V B 0.1UF K
C643 76285104 CERAMIC CHIP, 50V B 0.1UF K
C645 76109103 CERAMIC CHIP, 50V B 0.01UF K
C665 #1 76073083 ELECTROLYTIC, 50V 3.3UF M 3A
#2 76073083 ELECTROLYTIC, 50V 3.3UF M 3A
#3 76669339 ELECTROLYTIC, 50V 3.3UF M
#4 76073083 ELECTROLYTIC, 50V 3.3UF M 3A

Location Parts No. Description
No.
Location Parts No. Description
No.
- 20 -
32WL66A/E/R/T
C666 #1 76073083 ELECTROLYTIC, 50V 3.3UF M 3A
#2 76073083 ELECTROLYTIC, 50V 3.3UF M 3A
#3 76669339 ELECTROLYTIC, 50V 3.3UF M
#4 76073083 ELECTROLYTIC, 50V 3.3UF M 3A
C667 76092515 CERAMIC CHIP, 16V F 4.7UF Z
C669 76092515 CERAMIC CHIP, 16V F 4.7UF Z
C672 76092726 CERAMIC CHIP, 10V B 2.2UF K
C673 76092726 CERAMIC CHIP, 10V B 2.2UF K
C675 76105221 CERAMIC CHIP, 50V CH 220PF J
C676 76105221 CERAMIC CHIP, 50V CH 220PF J
C677 76109391 CERAMIC CHIP, 50V B 390PF K
C678 76109391 CERAMIC CHIP, 50V B 390PF K
C685 #1 76073081 ELECTROLYTIC, 50V 1UF M
#2 76073081 ELECTROLYTIC, 50V 1UF M
#3 76669010 ELECTROLYTIC, 50V 1UF M
#4 76073081 ELECTROLYTIC, 50V 1UF M
C686 76092463 CERAMIC CHIP, 16V B 0.22UF K
C689 76092463 CERAMIC CHIP, 16V B 0.22UF K
C690 #1 76073005 ELECTROLYTIC, 6.3V 1000UF M 3A
#2 76073005 ELECTROLYTIC, 6.3V 1000UF M 3A
#3 76664102 ELECTROLYTIC, 6.3V 1000UF M 3A
#4 76073005 ELECTROLYTIC, 6.3V 1000UF M 3A
C691 76619102 ELECTROLYTIC CHIP, 16V 47UF M
C692 76619102 ELECTROLYTIC CHIP, 16V 47UF M
C693 76092795 CERAMIC CHIP, 6.3V B 2.2UF K
C695 #1 76073019 ELECTROLYTIC, 10V 470UF M
#2 76073019 ELECTROLYTIC, 10V 470UF M
#3 76665471 ELECTROLYTIC, 10V 470UF M
#4 76073019 ELECTROLYTIC, 10V 470UF M
C696 #1 76073019 ELECTROLYTIC, 10V 470UF M
#2 76073019 ELECTROLYTIC, 10V 470UF M
#3 76665471 ELECTROLYTIC, 10V 470UF M
#4 76073019 ELECTROLYTIC, 10V 470UF M
C801 76503507 PLASTIC FILM, AC275V 0.22UF K
C802 76503507 PLASTIC FILM, AC275V 0.22UF K
C803 76503437 PLASTIC FILM, 630V 0.15UF J, 3D2J154J-A7
C804 76214103 CERAMIC DISC, 500V B 0.01UF K
C805 76092281 CERAMIC DISC, AC250V E 4700PF
C810 76125035 ELECTROLYTIC 692R 450V 470UF M 3F
C811 76092567 CERAMIC DISC, AC250V E 1000PF M
C811A 23960136 ADHESIVE, SILICONE, TSE3843-W
C812 76092567 CERAMIC DISC, AC250V E 1000PF M
C813 76503047 PLASTIC FILM, 63V 0.33UF J
C815 76503049 PLASTIC FILM, 63V 0.47UF J
C816 76073090 ELECTROLYTIC, 50V 100UF M
C817 76567224 PLASTIC FILM, 50V 0.22UF J
C819 76214101 CERAMIC DISC, 500V B 100PF K
C820 76567224 PLASTIC FILM, 50V 0.22UF J
C821 76092343 CERAMIC DISC, 2KV 680PF K
C822 76092344 CERAMIC DISC, 2KV 820PF K
C823 76092341 CERAMIC DISC, 2KV R 470PF K
C824 76591102 PLASTIC FILM, 50V 1000PF J
C825 76503053 PLASTIC FILM, 63V 1UF J
C826 76092341 CERAMIC DISC, 2KV R 470PF K
C827 76678229 ELECTROLYTIC, 200V 2.2UF M
C851 76092538 CERAMIC CHIP, 10V F 1UF Z
C852 76109102 CERAMIC CHIP, 50V B 1000PF K
C883 76125039 ELECTROLYTIC 04P 35V 4700UF M 4A
C888 76109102 CERAMIC CHIP, 50V B 1000PF K
C889 76073094 ELECTROLYTIC, 50V 1000UF M
C890 76503047 PLASTIC FILM, 63V 0.33UF J
C890A 23960136 ADHESIVE, SILICONE, TSE3843-W
C4073 76105220 CERAMIC CHIP, 50V CH 22PF J
C8110 #1 76125008 ELECTROLYTIC, 450V 220UF M
#2 76125008 ELECTROLYTIC, 450V 220UF M
#4 76125008 ELECTROLYTIC, 450V 220UF M
CA01 76092538 CERAMIC CHIP, 10V F 1UF Z
CA02 76105101 CERAMIC CHIP, 50V CH 100PF J
CA19 76092538 CERAMIC CHIP, 10V F 1UF Z
CA70 76100104 CERAMIC CHIP, 25V F 0.1UF Z
CA71 76100104 CERAMIC CHIP, 25V F 0.1UF Z
CA90 76100104 CERAMIC CHIP, 25V F 0.1UF Z
CA91 76105101 CERAMIC CHIP, 50V CH 100PF J
CA92 76105101 CERAMIC CHIP, 50V CH 100PF J
CA93 76105101 CERAMIC CHIP, 50V CH 100PF J
CB02 76202221 ELECTROLYTIC, 10V 220UF M
CB03 76100104 CERAMIC CHIP, 25V F 0.1UF Z
CB04 76100104 CERAMIC CHIP, 25V F 0.1UF Z
CB05 76202221 ELECTROLYTIC, 10V 220UF M
CC01 76109102 CERAMIC CHIP, 50V B 1000PF K
CC02 76109102 CERAMIC CHIP, 50V B 1000PF K
CC03 76109102 CERAMIC CHIP, 50V B 1000PF K
CC05 76109102 CERAMIC CHIP, 50V B 1000PF K
CC06 76109102 CERAMIC CHIP, 50V B 1000PF K
CC07 76109102 CERAMIC CHIP, 50V B 1000PF K
CC11 76109102 CERAMIC CHIP, 50V B 1000PF K
CC12 76109102 CERAMIC CHIP, 50V B 1000PF K
CC40 76109102 CERAMIC CHIP, 50V B 1000PF K
CC41 76109102 CERAMIC CHIP, 50V B 1000PF K
CE04 76092281 CERAMIC DISC, AC250V E 4700PF
CE05 #1 76092281 CERAMIC DISC, AC250V E 4700PF
#2 76092281 CERAMIC DISC, AC250V E 4700PF
#4 76092281 CERAMIC DISC, AC250V E 4700PF
CE07 76503049 PLASTIC FILM, 63V 0.47UF J
CE09 76668339 ELECTROLYTIC, 35V 3.3UF M
CE10 76125003 ELECTROLYTIC, 450V 120UF M
CE12 76503041 PLASTIC FILM , 63V 0.1UF J
CE13 #1 76092567 CERAMIC DISC, AC250V E 1000PF M
#2 76092567 CERAMIC DISC, AC250V E 1000PF M
#3 76092565 CERAMIC DISC, AC250V B 470PF K
#4 76092567 CERAMIC DISC, AC250V E 1000PF M
CE14 #1 76092567 CERAMIC DISC, AC250V E 1000PF M
#2 76092567 CERAMIC DISC, AC250V E 1000PF M
#3 76092565 CERAMIC DISC, AC250V B 470PF K
#4 76092567 CERAMIC DISC, AC250V E 1000PF M
CE16 76073181 ELECTROLYTIC, 35V 56UF M
CE17 76092339 CERAMIC DISC, 2KV 330PF K
CE23 76214471 CERAMIC DISC, 500V B 470PF K
CE24 76285104 CERAMIC CHIP, 50V B 0.1UF K
CE29 76436331 CERAMIC DISC, 50V SL 330PF J
CE40 76073183 ELECTROLYTIC, 35V 220UF M
CE42 76539104 PLASTIC FILM, 50V 0.1UF J
CE43 76503041 PLASTIC FILM , 63V 0.1UF J
CE51 76617023 ELECTROLYTIC, 16V 330UF M
CE52 76092179 CERAMIC CHIP, 25V B 0.22UF K
CE53 76092179 CERAMIC CHIP, 25V B 0.22UF K
CE55 76073181 ELECTROLYTIC, 35V 56UF M
CE82 76676470 ELECTROLYTIC, 100V 47UF M
CE85 76073178 ELECTROLYTIC, 25V 3300UF M
CE87 76669100 ELECTROLYTIC, 50V 10UF M
CE90 76503047 PLASTIC FILM, 63V 0.33UF J
CE91 76503041 PLASTIC FILM , 63V 0.1UF J
CE92 76794101 ELECTROLYTIC, 16V 100UF M
CE95 76092179 CERAMIC CHIP, 25V B 0.22UF K
CE96 76073189 ELECTROLYTIC, 35V 1000UF M
CG01 #1 76073086 ELECTROLYTIC, 50V 10UF M 3A
#2 76073086 ELECTROLYTIC, 50V 10UF M 3A
#3 76669100 ELECTROLYTIC, 50V 10UF M
#4 76073086 ELECTROLYTIC, 50V 10UF M 3A
CG02 76109152 CERAMIC CHIP, 50V B 1500PF K
CG03 76109471 CERAMIC CHIP, 50V B 470PF K
CG04 76109221 CERAMIC CHIP, 50V B 220PF K
CG05 76092730 CERAMIC CHIP, 16V B 0.1UF K
CG06 #1 76073086 ELECTROLYTIC, 50V 10UF M 3A
#2 76073086 ELECTROLYTIC, 50V 10UF M 3A
#3 76669100 ELECTROLYTIC, 50V 10UF M
#4 76073086 ELECTROLYTIC, 50V 10UF M 3A