Totevision LCD-1700V User manual

________________________________________ 17”LCD MONITOR
6
lLCD-1700V 17” LCD Monitor
Overall Dimension(HxWxD): 426 x 444 x 546 mm
Effective Display area(H/V): 337.92 x 270.34 mm
Display colors: 16M colors
Scan Frequencies:
Horizontal 31.47K to 80KHz
Vertical 60Hz to 75Hz
Number of Pixels: 1280x1024 pixels
Pixel pitch: 0.264x0.264 mm
Picture Tube: 17" TFT LCD panel
Power:
Input 110-240VAC(auto-sensing)
Frequency: 48-62Hz
Consumption 45Watts maximum (on)
3 Watts (Power saving off mode)
PC RGB Connector: 15pin Mini D-sub (Standard)
Audio connector 1 x stereo input
Speaker 2W x 2
RGB Signals:
Video Analog RGB 0.7Vp-p/75Ω
Sync Separate
Display Data Channel:
Compatibility VESA DDC 1/2B
Video connector input
S-connector x 1 (S-Video In)
AV connector x 3 ( one for video
Two for audio left/right)
Mini D type x 1 (for YcbCr/Component input)
BNC connector x 1 ( Composite Video In)
Video connector output
BNC connector x 1 ( Composite Video Out)

17” LCD MONITOR _____________________________________
7
Operations:
User Controls On/Off Power Button, source select
+/-and Up/down keys
On Screen Display Auto adjustment, Brightness, contrast
color temperature, Hue, Tint,
Source select, PIP setup
H-position, V-position, OSD position
Audio volume, bass, treble, mute
Load default
Control Type: Digital
Compatibility: IBM and compatible, Apple
Macintosh, NEC
Environmental Limits:
Operating Temp 32°to 103°F ( 0°to 40°C )
Storage Temp. -4°to 140°F ( -20°to 60°C )
Operating Humidity 10 to 85% without Condensation
Storage Humidity 10 to 95% without Condensation
Agency Approval
EMI FCC-B and CE
Emissions MPR-II
Energy Saving EPA energy star, VESA DPMS
Safety UL, TUV

__________________________________ 15”/17”/19”LCD MONITOR
10
PRECAUTIONS
HANDLING
lThe monitor must be treated with caution and not be exposed
to impact and shock. The monitor is made of fragile glass panel.
lDo not expose to sharp shock.
lNever touch the display area or rub on it with a hard, stiff object or
tools because the panel is easily scratched, even your monitor is
protected with one glass filter.
lEvery effort has been made to protect the panel, however the
monitor is an extremely fragile product.
CLEANING
lThe display area is highly prone to scratching. Do not use ketone
type material (ex. Acetone), Ethyl alcohol, toluene, ethyl acid or
Methyl chloride to clear the panel. It might permanently damage
the panel.
lThe desirable cleaners are water, IPA (Iso Prophyl Alcohol) or
Hexane.
lDon’t let water or oil penetrate the monitor. If the droplets are kept
for a long time, Staining and discoloration may occur.
lKeep food particles and fingerprints away from the display area.

15”/17”/19” LCD MONITOR
_____________________________________
11
STORAGE
lDo not store the monitor in temperature higher than 35 degree
Celsius or humidity higher than 70% and no condensation.
lStore in dark places away from sunlight and ultra violet (UV)
radiation.
lAir bubble may develop within the glass panel, if this is not
observed.

__________________________________ 15”/17”/19”LCD MONITOR
12
CHAPTER 2
PRODUCT PACKAGE
Open the shipping carton and check the contents. If any items are
missing or damaged, contact your dealer immediately.
The package should include the following items
lAnalog Color TFT LCD Monitor
lAccessory Box:
1. VGA cable x 1
2. AC to DC adapter x 1
3. Power Cord x 1
4. User’s manual/Warranty Card x 1
5. Audio cable x 1
6. Mini DIN/RCA cable (for Component Video In use)
INSTALLING THE MONITOR
The monitor is equipped
with a auto sensing
power supply for voltage
ranges from
110~240VAC, 60/50Hz.
Confirm the line voltage
designation on the rear
panel of the monitor.
Note: The drawing is used
for 17”and 19”monitor to
install the power adapter and
VGA cable.

15”/17”/19” LCD MONITOR
_____________________________________
13
FOLLOW THESE STEPS TO INSTALL THE
MONITOR
1. Before you connect the cables, make sure that the monitor
and the system unit power switches are OFF
2. Plug one end of the 15pin signal cable to the monitor and the
other end to the video signal connector at the rear of the
system. Tighten the two screws on the cable connector on
both ends, otherwise the screen will be abnormal and LED
light is yellow color, not the normal green color.
3. Connect the power to the monitor through the AC/DC adapter
4. Connect the power cord on the AC outlet, see the below
5. Connectivity of video cable as below
RGBDC IN Audio
YcbCr
Compoment
S-Video
Video
Audio L
Audio R
BNC INBNC Out
For LCD-1700V 17”and LCD-1900V 19”LCD monitor connection

15”/17”/19” LCD MONITOR
_____________________________________
17
lLCD-1700V 17”Monitor
The control key description
1. : Power Switch
2. ﹣/+: Decrement/Increment or Volume control
3. ∇/∆: Cursor Up/Down or Brightness control
4. MENU : Activate the on screen display function
5. Auto : Auto adjustment

__________________________________ 15”/17”/19”LCD MONITOR
18
Descriptions
1. : Power switch
Use the power switch to turn ON or OFF power. We
recommend turning your system power on first, then the LCD
monitor
2. ﹣& +: decrement & increment/ Volume Control keys
The two keys have two functions, controlled by the MENU key.
When activating OSD screen, the two keys are defined to
decrement or increment the values of each selected items.
When de-activating OSD screen, these two keys are used to
change the speaker volume value.
3. ∇& ∆: Select down & up key / Brightness Control keys
The two keys have two functions, controlled by the MENU key.
When activating OSD screen, the two keys are used to select
the wanted adjustment items. When de-activating OSD
screen, these two keys are used to change the Brightness
value.
4. Menu
Press the Menu key to activate the on screen display screen. It
is a toggle key. Press twice to turn off the on screen display
screen. After 30 sec idle time, the OSD screen will
automatically turn off.
5.Auto adjustment
Pressing this key to select the input source.