Totevision LCD-1513TS 15.1 User manual

TFT LCD COLOR MONITOR
User’s manual
ModelΚLCD-1513VB 15.1ϛ
ModelΚLCD-1513TS 15.1ϛ
Ϥ
1319 Dexter Avenue N.#020,
Seattle,WA 98109
TELΚ206/623-6000
FAXΚ206/623-6609
R

FCC Notice
This equipment has been tested and found to comply with the limits for FCC class B.
Trademarks
Trademarks are the rights of their respective owners.
We reserved the right to change the specification or the documentation without further notice. We also take no
responsibility for damage caused by improper use of this product. Warranty void if customer break the seal of the
enclosures.
Multilingual User’s ManualΚ
1.Introduction
Product Description …………………………
Package Contents………………………………
Product Features………………………………
Cleaning…………………………………………
2. Control Function
OSD Button ………………………………………
OSD Control………………………………………
3. Inputs Diagram
Inputs ……………………………………………
Setting Up ………………………………………
4. Display Angle ………………………………………
5. Product Specification ……………………………
6. Display Modes……………………………………………
7.Service Information…………………………………
8. Appendices………………………………………….
Page.2
Page.2
Page.2
Page.3
Page.4
Page.6
Page.10
Page.11
Page.13
Page.14
Page.15
Page.16
Page.17
Page.1

Introduction
Product Description
Congratulations on purchasing the next generation of LCD monitor display! This
state-of-the-art high brightness LCD monitor incorporates high quality display into a small light
weighted module. It has power-saving capabilities and emits no harmful X-ray radiation. You will
certainly enjoy the benefit of its features: high brightness for better visibility under any given
environment, expanded color domain for better quality images, and further viewing distance for
comfort and safety.
This LCD monitor incorporates 15” color active matrix thin-film-transistor (TFT) liquid
crystal display with ABT (Advanced Brightness Technology) that makes the screen much more
brighter in order to provide superior display performance, especially for movies and picture
display. Maximum resolution of XGA 1024 x 768 is ideal for displaying complex graphics and high
definition images. Other outstanding designs that enhance this LCD monitor’s performance are
Plug & Play compatibility, audio system, A/V input, and users friendly OSD (On Screen Display)
controls.
Package Contents
Included with your LCD monitor are following itemsΚ
z15” TFT LCD monitor
z15 pin D-sub signal cable
zAC power cable
zUser’s manual
zSound Card Cable
zAdaptor & AC Cord
Product Features
zHigh contrast color TFT LCD display support resolution up to XGA 1024 x 768.
zCompatible with IBM VGA, VESA, and Macintosh standards.
zImbedded audio system provides sound performance.
z2 AV-IN and S-video use.
Page.2
zAudio-1, Audio-2, and PC line in sound application.
zPower management system conforms to VESA DPMS standard.
zSupport DDC1/2B for Plug & Play compatibility.
zAdvanced OSD control for picture quality adjustment.
zDetachable stand for wall-mounting application.
Cleaning
zGently wipe screen with a clean camel hair lens brush, or a soft, clean, lint-free cloth. This
removes dust and other particles that can scratch the screen.
zDo not apply pressure to the screen surface when wiping it clean.
zDo not pour or spray any liquid directly onto the screen or case of the LCD monitor.
Chemical cleaners have been reported to damage the screen or case of the LCD monitor.
Page.3

Control Function
Control Button Front View
1.Power SwitchΚPressing this button turns the display system power on or off.
2.EarphoneΚThis input would offer users another better choice in using a monitor without
disturbing others.
3.Power LEDΚThis Power LED indicates different status when this unit operates in different
modes.
Page.4
4.OSD Menu / SelectΚPressing this button pops up the OSD menus on the screen, and used to
select the OSD control options on the screen.
5.IncreaseΚThis button is used to adjust the increasing value of selected OSD control option.
6.DecreaseΚThis button is used to adjust the decreasing value of selected OSD control option.
Page.5
ˆˁˣ˸ʳ˟˘˗ʳ
˄ˁˣ˸ʳ˦˼˶˻ ˅ˁ˘˴˻˸
ˈˁ˜˶˸˴˸
ˉˁ˗˸˶˸˴˸
ˇˁˢ˦˗ʳˠ˸ʳ˂ʳ˦˸˿˸˶

OSD
Monitor Function Selection MenuΚ
Auto AdjustΚSelect this function can make the monitor have best efficiencyΖ
BrightnessΚAdjust the brightness using Ѐand Ёbuttons.
ContrastΚAdjust the contrast using Ѐand Ёbuttons
ClockΚAdjust the clock using Ѐand Ёbuttons
PhaseΚAdjust the phase using Ѐand Ёbuttons
Horizontal PositionΚPressing Ѐmoves the display image to right; Pressing Ё
moves the display image to left
Vertical PositionΚPressing Ѐmoves the display image upward; Pressing Ё
moves the display image downward
Page.6
Tools MenuΚ
Input AV1: 1st Video-out connector of any image resource
Input AV2Κ2nd Video-out connector of any image resource
Input S-VideoΚS Video-out connector of any image resource
VolumeΚAdjust the volume using Ѐand Ёbuttons
MuteΚMute function.
ResetΚreset function.
Page.7

RGB Adjusting MenuΚ
RedΚRed Range
GreenΚGreen Range
BlueΚBlue Range
Page.8
OSD Function Selection MenuΚ
Exit OSDΚExit the OSD function selection menu.
OSD Horizontal PositionΚPressing Ѐmoves the OSD menu to right; Pressing Ё
moves the OSD menu to left
OSD Vertical PositionΚPressing Ѐmoves the OSD menu upward; Pressing Ё
moves the OSD menu downward
OSD Time OutΚSet the OSD time
Moiré AdjustΚSet panel moiré degrees and noise.
Page.9

Inputs Diagram
Inputs
μ1νμ2νμ3νμ4ν
μ5νμ6νμ7νμ8ν
μ1νAUDIO1ΚThis can be connected to the 1st audio-out connector of any sound resource.
μ2νAUDIO2ΚThis can be connected to the 2nd audio-out connector of any sound resource.
μ3νLINE INΚThis can be connected to the 3rd audio-out connector of any sound resource.
μ4νDC INΚThis is for connecting the power cable.
μ5νVIDEO1ΚThis can be connected to the 1st video-out connector of any video resource.
μ6νVIDEO2ΚThis can be connected to the 2nd video-out connector of any video resource.
μ7νS-VIDEOΚThis can be connected to the 3rd video-out connector of any video resource.
μ8νPC INΚThis can be connected with the D-Sub 15 pin signal connector.
Page.10
Precautions
zRead all of these instructions and save them for later use.
zFollow all warnings and instructions on the product.
Product
zDo not cover block the vent holes in the case.
zDo not insert sharp objects or spill liquid into the LCD monitor through cabinet slots. They
may cause accidents, fire, electric shock or failure.
zDisconnect the power plug from the AC outlet if you will not use it for an indefinite period.
zDo not attempt to service this product yourself, by opening or removing covers may expose
you to dangerous voltage points or other risks.
zDo not touch the screen directly with your fingers. You may damage the screen, and oil from
your skin in difficult to remove.
zDo not apply pressure to screen. The LCD is a very delicate product.
Power
zUse the type of power indicated on the marked label.
Plugs
zDo not remove any of the prongs of the monitor’s three-pronged power plug.
zDisconnect the power plug from the AC outlet under following conditionsΚ
zIf you will not use it for an indefinite period time.
zWhen the power cord or plug is damaged or frayed.
zIf the product does not operate properly, adjust only those controls that are mentioned in the
operating instructions. Improper adjustment of other controls may result in damage and will
often require extensive work by a qualified technician to restore the product to normal
operation.
zIf the product has been dropped or the cabinet has been damaged.
zIf the product exhibits a distinct change in performance, indicating a need for service.
zPower and extension cords
zDo not allow anything to rest on the power cord.
Page.11

zDo not locate this product where persons will walk on the cord.
zUse the proper power cord with correct attachment plug type. If the power source is 120V
AC, use a power cord that has UL and C-UL approvals. If the power source is a 240V AC
supply, use the tandem (T blade) type attachment plug with ground conductor power cord
that meets the respective European country’s safety regulations, such as VDE for
Germany.
zDo not overload wall outlets or power cords. Ensure that the total of all units plugged into
the wall outlet does not exceed 10 amperes.
zEnsure that the total ampere ratings on all units plugged into the extension cord is not
above the cord’s rating.
zIf the power supply cord, which came with your monitor, is to be connected to the PC
instead of the wall outlet, this equipment is to be used with UL/TÜV approved computers
with receptacle rated 100~240V AC, 50/60Hz, 1.0A(minimum).
Environment
zPlace the monitor on a flat and leveled surface.
zPlace the monitor in a will-ventilated place.
zKeep the monitor away from the following:
Do not place unit in extreme hot, cold or humid environment and do not place it directly
under sunlight, dusty surroundings, equipment that generate strong magnetic fields.
zPlease adjust the frequency to 75 Hz after setting up the LCD monitor.
zThen push the OSD menu button and use the Auto Adjust function to fine the best mode of
your computer.
Page.12
Display Angle
Tilting
For viewing clarity, you can tile the LCD forwardΰup to 3 degreesαor backward ΰup to
15 degreesα.
DownΚ3o
RightΚ40oLeftΚ40o
UpΚ15 o
Page.13

Product Specification
Type
Spec PC SPEAKER AV
LCD Display 15” active matrix TFT LCD panel
Pixel Pitch 0.297(H) x 0.297(V) mm
Max. Resolution 1024(H) x 768(V) XGA
Set Size 418(H) x 399(V) x 201(D) mm
Pack Size 480(H) x 450(V) x 230(D) mm
Contrast Ratio 150:1~400:1
Brightness 500 ~ 1000 cd/m2
Response Time 20~50ms
Display Color 16.777 M
View Angle L+/R- 60~80
U+/D- 50~60
Pc Interface RGB analog 0.7V peak to peak
Video Sync. TTL positive or negative
Display Mode VGA, SVGA, XGA
Audio-in None Phone jack RCA (x 2)
Video-in None None S & RCA (x2)
Signal Connector D-sub 15 pin
Front Control Power on/off with LED, OSD Menu, +/-Adjustment
OSD Contrast, Brightness, Auto Adjust, Clock, Phase, H-Position,
V-Position
Input: Pc / AV1 / AV2 / S-Video (AV)
Power Adapter AC Input: 100-240V~1.5A, 50-60Hz
DC Output: 12V / 5.0A
Operating Conditions Temperature: 0к~35к
Humidity: 20%~95%
Storage Conditions Temperature: -20к~60к
Humidity: 5%~95%
Certification FCC (DOC), CE-B, VCC-I, UL, TUV/GS
Weight Net WeightΚ4.66Kgs, Gross WeightΚ6.66Kgs
Page.14
Display Modes
Mode Resolution H Freq (kHz) V Freq (Hz)
1 640 x 350 31.469 70.087
2 640 x 400 24.823 56.416
3 640 x 400 31.469 70.087
4 640 x 480 31.469 59.940
5 640 x 480 35.000 66.667
6 640 x 480 37.861 72.809
7 640 x 480 37.500 75.000
8 720 x 400 31.469 70.087
9 800 x 600 35.156 56.250
10 800 x 600 37.879 60.317
11 800 x 600 48.077 72.188
12 800 x 600 46.875 75.000
13 832 x 624 49.107 75.087
14 1024 x 768 48.363 60.004
15 1024 x 768 56.476 70.069
16 1024 x 768 60.023 75.029
Page.15

Service Information
Service
Please review the warranty information located on the back of the Quick Start Guide or
contact your local authorized distributor/retailer.
Page.16
Appendices
Troubleshooting
If you are experiencing trouble with your LCD display, please refer to the following.
If the problem persists, please contact your local dealer or our service center.
Note: For best viewing image effect, please set resolution at 1024x768
Problem: No signal
Ensure all cables and power connections are correctly and securely connected.
Check the power LED light is in “green” color.
Make sure the computer is on.
Press the OSD “Auto Setup” for best view result.
Problem: Image is out of focus
Adjust “Phase” function inside the OSD until the image is focused.
Page.17