Totevision LCD-840D User manual

FRONT VIEW
BACK VIEW
BOTTOM VIEW
1. ON/OFF : PRESS THIS BUTTON TO TURN ON THE POWER.
PRESS AND HOLD FOR MORE THAN 2 SECONDS TO TURN THE POWER OFF.
UNDER POWER ON CONDITION, THIS BUTTON ACTS AS INPUT MODE
SELECTOR (VGA/ S-VIDEO/ VGA).
2. MENU :PRESS THIS BUTTON FOR MENU ADJUSTING, SELECTING THE MENU YOU
WANT WITH ○
＋/○ －, THEN PRESS THIS BUTTON AGAIN TO ENTER THE
SELECTED MENU.
3. ○
＋:PRESS THIS BUTTON TO INCREASE OR DECREASE THE VALUE OF
ADJUSTMENT FUNCTIONS.
4. ○
－:PRESS THIS BUTTON TO INCREASE OR DECREASE THE VALUE OF
ADJUSTMENT FUNCTIONS.
1

ON SCREEN DISPLAY FOR VIDEO INPUT
VIDEO MAIN OSD MENU FIGURE
---PRESS “ENTER” BUTTON TO ACTIVATE THE OSD MAIN AS
SHOWN ON SCREEN
---PRESS “UP” OR “DOWN” BUTTON AGAIN TO SELECT THE
OSD MENU
1. BRIGHTNESS
---PRESS “ENTER” BUTTON TO ENTER THIS MODE
---PRESS “UP” OR “DOWN” BUTTON TO SELECT THE DESIRED
ADJUSTMENT ITEM
* BRIGHTNESS:TO ADJUST THE BRIGHTNESS OF THE PANEL
*CONTRAST: TO ADJUST THE WHITE COLOR LEVEL OF THE
IMAGE.
* BACK LIGHT: TO ADJUST THE BACK LEVEL OF THE PANEL
*RECALL: WHEN YOU RUN THE FUNCTION, THE MONITOR
WILL BE SETTING TO LAST STATUS OF THE SAVING VALUE
*EXIT:RETURN TO LAST MENU
2. VIDEO QUALITY
---PRESS “ENTER” BUTTON TO ENTER THIS MODE
---PRESS “UP” OR “DOWN” BUTTON TO SELECT THE DESIRED
ADJUSTMENT ITEM
* BRIGHTNESS: TO ADJUST THE BRIGHTNESS OF THE PANEL
*CONTRAST: TO ADJUST THE WHITE COLOR LEVEL OF THE
IMAGE
*SATURATION: TO ADJUST THE COLOR SATURATION OF THE
IMAGE
* HUE: TO ADJUST THE COLOR HUE OF THE IMAGE
* SHARPNESS: TO ADJUST THE IMAGE FROM WEAK TO
SHARP
* RECALL: WHEN YOU RUN THE FUNCTION, THE MONITOR
WILL BE SETTING TO LAST
* EXIT: RETURN TO LAST MENU
Brightness
Brightness
Contrast
Back Light
Recall
Exit
Video Quality
Brightness
Contrast
Saturat
Hue
Sharpness
Recall
Exit
2

3. OSD FUNCTION
---PRESS “ENTER”BUTTON TO ENTER THIS MODE
---PRESS “UP”OR “DOWN”BUTTON TO SELECT THE DESIRED
ADJUSTMENT ITEM
* H POSITION: TO ADJUST THE HORIZONTAL POSITION OF
THE OSD MENU
*V POSITION: TO ADJUST THE VERTICAL POSITION OF THE
OSD MENU
*LANGUAGE: N/A
*OFF TIMER:
*RECALL: WHEN YOU RUN THE FUNCTION, THE MONITOR
WILL BE SETTING TO LAST
*EXIT: RETURN TO LAST MENU
4. IMAGE
---PRESS “ENTER” BUTTON TO ENTER THIS MODE
---PRESS “UP” OR “DOWN” BUTTON TO SELECT THE DESIRED
ADJUSTMENT ITEM
*VIDEO SYSTEM: NTSC /PAL /SECAM /NTSC 4.43 /AUTO
*DITHERING: N/A
*SELECT INPUT: PRESS TO SELECT INPUTS VGA/S-VIDEO/
VIDEO
*EXIT: RETURN TO LAST MENU
5. RECALL
---PRESS “ENTER” BUTTON TO ENTER THIS MODE
---PRESS “UP” OR “DOWN” BUTTON TO SELECT THE DESIRED
ADJUSTMENT ITEM
*RECALL ALL: WHEN YOU RUN THE FUNCTION, THE MONITOR
WILL BE SETTING TO LAST
*EXIT: RETURN TO LAST MENU
6. EXIT MENU
OSD Function
H Position
V Position
Language
Off Timer
Recall
Exit
Image
Video System
Dithering
Select Input
Exit
Recall
Recall All
Exit
Exit Menu
3

ON SCREEN DISPLAY FOR VGA INPUT
VGA MAIN OSD MENU FIGURE
---PRESS “ENTER” BUTTON TO ACTIVATE THE OSD MAIN MENU
AS SHOWN ON SCREEN
---PRESS “UP” OR “DOWN” BUTTON AGAIN TO SELECT THE
OSD MENU
1. AUTO CONFIG
---PRESS “ENTER” BUTTON TO ENTER THIS MODE
---PRESS “UP” OR “DOWN” BUTTON TO SELECT THE DESIRED
ADJUSTMENT ITEM
*AUTO CONFIG: SELECT “YES” TO MAKE THE MONITOR HAVE
THE BEST EFFICIENCY
*EXIT: RETURN TO LAST MENU
2. POSITION
---PRESS “ENTER” BUTTON TO ENTER THIS MODE
---PRESS “UP” OR “DOWN” BUTTON TO SELECT THE DESIRED
ADJUSTMENT ITEM
*H POSITION: TO ADJUST THE HORIZONTAL POSITION OF THE
IMAGE
*V POSITION: TO ADJUST THE VERTICAL POSITION OF THE
IMAGE
*AUTO POSITION: SELECT “YES” TO AUTO ADJUST THE
VERTICAL AND HORIZONTAL POSITION
* EXIT: RETURN TO LAST MENU
3. BRIGHTNESS
---PRESS “ENTER” BUTTON TO ENTER THIS MODE
---PRESS “UP” OR “DOWN” BUTTON TO SELECT THE DESIRED
ADJUSTMENT ITEM
*BRIGHTNESS: TO ADJUST THE BRIGHTNESS OF THE PANEL
*CONTRAST: TO ADJUST THE WHITE COLOR LEVEL OF THE
IMAGE
*BACK LIGHT: TO ADJUST THE BACK LIGHT BULE INTENSITY
*RECALL: WHEN YOU RUN THE FUNCTION, THE MONITOR
WILL BE SETTING TO LAST STATUS OF THE SAVING VALUE
*EXIT: RETURN TO LAST MENU
Auto Config
Auto Config
Exit
Position
H Position
V Position
Auto Position
Exit
Brightness
Brightness
Contrast
Back Light
Recall
Exit
4

4. CLOCK
---PRESS “ENTER” BUTTON TO ENTER THIS MODE
---PRESS “UP” OR “DOWN” BUTTON TO SELECT THE DESIRED
ADJUSTMENT ITEM
*CLOCK: TO ADJUST VIDEO SAMPLING CLOCK
*PHASE: TO ADJUST THE NOISE OF THE IMAGE
*RECALL: WHEN YOU RUN THE FUNCTION, THE MONITOR
WILL BE SETTING TO LAST STATUS OF THE SAVING VALUE
*EXIT: RETURN TO LAST MENU
5. COLOR
---PRESS “ENTER” BUTTON TO ENTER THIS MODE
---PRESS “UP” OR “DOWN” BUTTON TO SELECT THE DESIRED
ADJUSTMENT ITEM
*COLOR 9300°K:TO SET THE COLOR TEMPERATURE OF
THE IMAGE TO 9300 K
*COLOR 5500°K:TO SET THE COLOR TEMPERATURE OF
THE IMAGE TO 5500 K
*BALANCE COLOR: TO ADJUST THE COLOR BALANCE
*USER COLOR: TO SET THE RGB COLOR OF THE IMAGE BY
ONESELF DEFINE
*AUTO BALANCE: AUTOMATIC ADJUSTMENT OF THE BALANCE
*AUJUST COLOR: PRESS “ENTER” BUTTON TO ENTER COLOR
ADJUSTMENT. PRESS “UP” OR “DOWN” BUTTON TO ADJUST
R/G/B COLOR LEVEL AND OFF SET
6. OSD FUNCTION
---PRESS “ENTER” BUTTON TO ENTER THIS MODE
---PRESS “UP” OR “DOWN” BUTTON TO SELECT THE DESIRED
ADJUSTMENT ITEM
*H POSITION: TO ADJUST THE HORIZONTAL POSITION OF THE
OSD MENU
*V POSITION: TO ADJUST THE VERTICAL POSITION OF THE
OSD MENU
*LANGUAGE: N/A
*OFF TIMER:THE METHOD OF OSD DISPLAY
*RECALL: WHEN YOU RUN THE FUNCTION, THE MONITOR
WILL BE SETTTING TO LAST
*EXIT: RETURN TO LAST MENU
Clock
Clock
Phase
Recall
Exit
Color
Color 9300°K
Color 5500°K
Balance Color
User Color
Auto Balance
Adjust Color
OSD Function
H Position
V Position
Language
Off Timer
Recall
Exit
5

7. IMAGE
---PRESS “ENTER” BUTTON TO ENTER THIS MODE
---PRESS “UP” OR “DOWN” BUTTON TO SELECT THE DESIRED
ADJUSTMENT ITEM
*MODE SELECT: CHANGE DOS MODE RESOLUTION
640 x 400 OR 720 x 350 OR 720 x 400
*DITHERING: N/A
*SELECT INPUT: PRESS TO SELECT INPUTS VGA / S-VIDEO /
VIDEO
*EXIT: RETURN TO LAST MENU
8.INFORMATION
VGA CONDITION
RESOLUTION AND FREQUENCY
9. RECALL
---PRESS “ENTER” BUTTON TO ENTER THIS MODE
---PRESS “UP” OR “DOWN” TO SELECT THE DESIRED
ADJUSTMENT ITEM
*RECALL ALL: TO SET DEFAULT VALUE TO THE ORIGINAL
SETTING
*EXIT: RETURN TO LAST MENU
10. EXIT MENU
Exit Menu
Information
Recall
Recall All
Exit
6
Image
Mode Select
Dithering
Select Input
Exit

SPECIFICATIONS
MODEL:LCD-840D
DISPLAY: 8.4” x 2
BACK LIGHT: BUILT IN CCFT
INPUT SIGNAL: NTSC / PAL (DUAL.CAPABLITY) / SECAM /
NTSC4.43
DOT FORMAT: 800 (H) x 600(V)
PIXEL PITCH: 0.213 (H) x 0.213 (V)
BRIGHTNESS RATING: 250 NIT TYP
NUMBER OF PIXELS: 262,144 DOTS
VIEWING ANGLE: LEFT & RIGHT 40 DEGREE
DOWN 10DEGREE
TOP 30DEGREE
PIXEL CONFIGURATION: STRIPE
VIDEO INPUT SIGNAL LEVEL: 1V P-P(POSITIVE) / 75 ohms
DIMENTIONS: 481.5 (W) X 177(H) x 33.7(D) mm
OPERATING TEMPERATURE: 0℃~60℃
DC POWER SUPPLY: DC 12V IN (FROM POWER SUPPLY)
POWER CONSUMPTION: 20W (MAX)
CONNECTORS: DC-IN, RCA VIDEO, S-VIDEO, D-SUB
RESPONSE: 20ms/RISING TIME, 30ms/FALLING TIME
WEIGHT: 2.6 Kg
PACKAGE CONTENTS
A. DUAL 8.4” TFT LCD MODULE WITH RACK
B. 4AAC ADAPTER x1
C. RCA CABLE x 2
D. S-VIDEO CABLE x 2
E. D-SUB CABLE x 2
7