Totevision LCD-840V User manual

KEY DEFINE:
ŒUP: PRESS THIS BUTTON TO INCREASE OR DECREASE THE VALUE OF
THE ADJUSTMENT FUNCTIONS.
•DOWN: PRESS THIS BUTTON TO INCREASE OR DECREASE THE VALUE OF
THE ADJUSTMENT FUNCTIONS.
ŽENTER: PRESS THIS BUTTON FOR MENU ADJUSTING, SELECTING THE MENU
YOU WANT WITH “UP”OR “DOWN”, THEN PRESS THIS BUTTON AGAIN
TO ENTER THE SELECTED MENU.
•POWER: PRESS THIS BUTTON TO TURN ON THE POWER.
PRESS AND HOLD FOR MORE THAN 2 SECONDS TO TURN THE
POWER OFF.
UNDER POWER ON CONDITION, THIS BUTTON ACTS AS INPUT
MODE SELECTOR (VGA/ S-VIDEO/ VIDEO).
•VGA IN
‘S-VIDEO IN
’VIDEO IN
“DC 12V
1

ON SCREEN DISPLAY FOR VIDEO INPUT
VIDEO MAIN OSD MENU FIGURE
---PRESS “ENTER” BUTTON TO ACTIVATE THE OSD MAIN AS
SHOWN ON SCREEN
---PRESS “UP” OR “DOWN” BUTTON AGAIN TO SELECT THE
OSD MENU
1. BRIGHTNESS
---PRESS “ENTER” BUTTON TO ENTER THIS MODE
---PRESS “UP” OR “DOWN” BUTTON TO SELECT THE DESIRED
ADJUSTMENT ITEM
* BRIGHTNESS: TO ADJUST THE BRIGHTNESS OF THE PANEL
*CONTRAST: TO ADJUST THE WHITE COLOR LEVEL OF THE
IMAGE.
* BACK LIGHT: TO ADJUST THE BACK LEVEL OF THE PANEL
*RECALL: WHEN YOU RUN THE FUNCTION, THE MONITOR
WILL BE SETTING TO LAST STATUS OF THE SAVING VALUE
*EXIT: RETURN TO LAST MENU
2. VIDEO QUALITY
---PRESS “ENTER” BUTTON TO ENTER THIS MODE
---PRESS “UP” OR “DOWN” BUTTON TO SELECT THE DESIRED
ADJUSTMENT ITEM
* BRIGHTNESS: TO ADJUST THE BRIGHTNESS OF THE PANEL
*CONTRAST: TO ADJUST THE WHITE COLOR LEVEL OF THE
IMAGE
*SATURATION: TO ADJUST THE COLOR SATURATION OF THE
IMAGE
* HUE: TO ADJUST THE COLOR HUE OF THE IMAGE
* SHARPNESS: TO ADJUST THE IMAGE FROM WEAK TO
SHARP
* RECALL: WHEN YOU RUN THE FUNCTION, THE MONITOR
WILL BE SETTING TO LAST
* EXIT: RETURN TO LAST MENU
Brightness
Brightness
Contrast
Back Light
Recall
Exit
Video Quality
Brightness
Contrast
Saturat
Hue
Sharpness
Recall
Exit
2

3. OSD FUNCTION
---PRESS “ENTER”BUTTON TO ENTER THIS MODE
---PRESS “UP”OR “DOWN”BUTTON TO SELECT THE DESIRED
ADJUSTMENT ITEM
* H POSITION: TO ADJUST THE HORIZONTAL POSITION OF
THE OSD MENU
*V POSITION: TO ADJUST THE VERTICAL POSITION OF THE
OSD MENU
*LANGUAGE: N/A
*OFF TIMER: THE METHOD OF OSD DISPLAY
*RECALL: WHEN YOU RUN THE FUNCTION, THE MONITOR
WILL BE SETTING TO LAST
*EXIT: RETURN TO LAST MENU
4. IMAGE
---PRESS “ENTER” BUTTON TO ENTER THIS MODE
---PRESS “UP” OR “DOWN” BUTTON TO SELECT THE DESIRED
ADJUSTMENT ITEM
*VIDEO SYSTEM: NTSC /PAL /SECAM /NTSC 4.43 /AUTO
*DITHERING: N/A
*SELECT INPUT: PRESS TO SELECT INPUTS VGA/S-VIDEO/
VIDEO
*EXIT: RETURN TO LAST MENU
5. RECALL
---PRESS “ENTER” BUTTON TO ENTER THIS MODE
---PRESS “UP” OR “DOWN” BUTTON TO SELECT THE DESIRED
ADJUSTMENT ITEM
*RECALL ALL: WHEN YOU RUN THE FUNCTION, THE MONITOR
WILL BE SETTING TO LAST
*EXIT: RETURN TO LAST MENU
6. EXIT MENU
OSD Function
H Position
V Position
Language
Off Timer
Recall
Exit
Image
Video System
Dithering
Select Input
Exit
Recall
Recall All
Exit
Exit Menu
3

ON SCREEN DISPLAY FOR VGA INPUT
VGA MAIN OSD MENU FIGURE
---PRESS “ENTER” BUTTON TO ACTIVATE THE OSDMAIN MENU
AS SHOWN ON SCREEN
---PRESS “UP” OR “DOWN” BUTTON AGAIN TO SELECT THE
OSD MENU
1. AUTO CONFIG
---PRESS “ENTER” BUTTON TO ENTER THIS MODE
---PRESS “UP” OR “DOWN” BUTTON TO SELECT THE DESIRED
ADJUSTMENT ITEM
*AUTO CONFIG: SELECT “YES” TO MAKE THE MONITOR HAVE
THE BEST EFFICIENCY
*EXIT: RETURN TO LAST MENU
2. POSITION
---PRESS “ENTER” BUTTON TO ENTER THIS MODE
---PRESS “UP” OR “DOWN” BUTTON TO SELECT THE DESIRED
ADJUSTMENT ITEM
*H POSITION: TO ADJUST THE HORIZONTAL POSITION OF THE
IMAGE
*V POSITION: TO ADJUST THE VERTICAL POSITION OF THE
IMAGE
*AUTO POSITION: SELECT “YES” TO AUTO ADJUST THE
VERTICAL AND HORIZONTAL POSITION
* EXIT: RETURN TO LAST MENU
3. BRIGHTNESS
---PRESS “ENTER” BUTTON TO ENTER THIS MODE
---PRESS “UP” OR “DOWN” BUTTON TO SELECT THE DESIRED
ADJUSTMENT ITEM
*BRIGHTNESS: TO ADJUST THE BRIGHTNESS OF THE PANEL
*CONTRAST: TO ADJUST THE WHITE COLOR LEVEL OF THE
IMAGE
*BACK LIGHT: TO ADJUST THE BACK LIGHT BULE INTENSITY
*RECALL: WHEN YOU RUN THE FUNCTION, THE MONITOR
WILL BE SETTING TO LAST STATUS OF THE SAVING VALUE
*EXIT: RETURN TO LAST MENU
Auto Config
Auto Config
Exit
Position
H Position
V Position
Auto Position
Exit
Brightness
Brightness
Contrast
Back Light
Recall
Exit
4

4. CLOCK
---PRESS “ENTER” BUTTON TO ENTER THIS MODE
---PRESS “UP” OR “DOWN” BUTTON TO SELECT THE DESIRED
ADJUSTMENT ITEM
*CLOCK: TO ADJUST VIDEO SAMPLING CLOCK
*PHASE: TO ADJUST THE NOISE OF THE IMAGE
*RECALL: WHEN YOU RUN THE FUNCTION, THE MONITOR
WILL BE SETTING TO LAST STATUS OF THE SAVING VALUE
*EXIT: RETURN TO LAST MENU
5. COLOR
---PRESS “ENTER” BUTTON TO ENTER THIS MODE
---PRESS “UP” OR “DOWN” BUTTON TO SELECT THE DESIRED
ADJUSTMENT ITEM
*COLOR 9300°K:TO SET THE COLOR TEMPERATURE OF
THE IMAGE TO 9300 K
*COLOR 5500°K:TO SET THE COLOR TEMPERATURE OF
THE IMAGE TO 5500 K
*BALANCE COLOR: TO ADJUST THE COLOR BALANCE
*USER COLOR: TO SET THE RGB COLOR OF THE IMAGE BY
ONESELF DEFINE
*AUTO BALANCE: AUTOMATIC ADJUSTMENT OF THE BALANCE
*AUJUST COLOR: PRESS “ENTER” BUTTON TO ENTER COLOR
ADJUSTMENT. PRESS “UP” OR “DOWN” BUTTON TO ADJUST
R/G/B COLOR LEVEL AND OFF SET
6. OSD FUNCTION
---PRESS “ENTER” BUTTON TO ENTER THIS MODE
---PRESS “UP” OR “DOWN” BUTTON TO SELECT THE DESIRED
ADJUSTMENT ITEM
*H POSITION: TO ADJUST THE HORIZONTAL POSITION OF THE
OSD MENU
*V POSITION: TO ADJUST THE VERTICAL POSITION OF THE
OSD MENU
*LANGUAGE: N/A
*OFF TIMER: THE METHOD OF OSD DISPLAY
*RECALL: WHEN YOU RUN THE FUNCTION, THE MONITOR
WILL BE SETTTING TO LAST
Clock
Clock
Phase
Recall
Exit
Color
Color 9300°K
Color 5500°K
Balance Color
User Color
Auto Balance
Adjust Color
OSD Function
H Position
V Position
Language
Off Timer
Recall
Exit
5

*EXIT: RETURN TO LAST MENU
7. IMAGE
---PRESS “ENTER” BUTTON TO ENTER THIS MODE
---PRESS “UP” OR “DOWN” BUTTON TO SELECT THE DESIRED
ADJUSTMENT ITEM
*MODE SELECT: CHANGE DOS MODE RESOLUTION
640 x 400 OR 720 x 350 OR 720 x 400
*DITHERING: N/A
*SELECT INPUT: PRESS TO SELECT INPUTS VGA / S-VIDEO /
VIDEO
*EXIT: RETURN TO LAST MENU
8.INFORMATION
VGA CONDITION
RESOLUTION AND FREQUENCY
9. RECALL
---PRESS “ENTER” BUTTON TO ENTER THIS MODE
---PRESS “UP” OR “DOWN” TO SELECT THE DESIRED
ADJUSTMENT ITEM
*RECALL ALL: TO SET DEFAULT VALUE TO THE ORIGINAL
SETTING
*EXIT: RETURN TO LAST MENU
10. EXIT MENU
Exit Menu
Information
Recall
Recall All
Exit
6
Image
Mode Select
Dithering
Select Input
Exit

SPECIFICATIONS
MODEL NO.: LCD-840V
SCREEN SIZE:8.4”(DIAGONAL)
DISPLAY RESOLUTION: 800 (H) x 600 (V)
PIXEL PITCH (mm): 0.213 (H) x 0.213 (V)
ACTIVE AREA (mm):170.4 (H) x 127.8 (V)
LCD PROFILE RATIO: 4:3
COLOR CONFIGURATION: R.G. B.VERTICAL STRIPE
BRIGHTNESS RATING: 250 NIT TYP
INPUT SIGNAL: NTSC / PAL (DUAL.CAPABLITY) / SECAM /
NTSC4.43
NUMBER OF PIXELS: 262,144 DOTS
VIEWING ANGLE: LEFT & RIGHT 40 DEGREE
DOWN 10 DEGREE
TOP 30 DEGREE
PIXEL CONFIGURATION: STRIPE
VIDEO INPUT SIGNAL LEVEL: 1V P-P(POSITIVE) / 75 ohm
OPERATING TEMPERATURE: 0℃~+60℃
STORAGE TEMPEATURE: -20℃~+70℃
DC POWER SUPPLY: DC 12V IN (FROM POWER SUPPLY)
POWER CONSUMPTION: <10 W
CONNECTORS: DC-IN, RCA VIDEO, S-VIDEO, D-SUB
RESPONSE: 20ms/RISING TIME, 30ms/FALLING TIME
DIMENTIONS: 291.0 (H) X 214.0 (W) x 37.9 (D) mm
7