Touch Dynamic QK22 User manual

USER MANUAL
VERSION 1.0 June 2020
QK22 Panel PC

ii
Copyright 2020
All Rights Reserved
Manual Version 1.0
The information contained in this document is subject to change without notice.
We make no warranty of any kind with regard to this material, including, but not limited
to, the implied warranties of merchantability and fitness for a particular purpose.
We shall not be liable for errors contained herein or for incidental or consequential
damages in connection with the furnishing, performance, or use of this material.
This document contains proprietary information that is protected by copyright. All rights
are reserved. No part of this document may be photocopied, reproduced or translated
to another language without the prior written consent of the manufacturer.
TRADEMARK
Intel®, Pentium® and MMX are registered trademarks of Intel® Corporation.
Microsoft® and Windows® are registered trademarks of Microsoft Corporation.
Other trademarks mentioned herein are the property of their respective owners.
Safety
IMPORTANT SAFETY INSTRUCTIONS
1. To disconnect the machine from the electrical power supply, turn off the power switch
and remove the power cord plug from the wall socket. The wall socket must be easily
accessible and in close proximity to the machine.
2. Read these instructions carefully. Save these instructions for future reference.
3. Follow all warnings and instructions marked on the product.
4. Do not use this product near water.
5. Do not place this product on an unstable cart, stand, or table. The product may fall,
causing serious damage to the product.
6. Slots and openings in the cabinet and the back or bottom are provided for ventilation
to ensure reliable operation of the product and to protect it from overheating. These
openings must not be blocked or covered. The openings should never be blocked by
placing the product on a bed, sofa, rug, or other similar surface. This product should
never be placed near or over a radiator or heat register or in a built-in installation
unless proper ventilation is provided.
7. This product should be operated from the type of power indicated on the marking label.
If you are not sure of the type of power available, consult your dealer or local power
company.
8. Do not allow anything to rest on the power cord. Do not locate this product where
persons will walk on the cord.
9. Never push objects of any kind into this product through cabinet slots as they may
touch dangerous voltage points or short out parts that could result in a re or electric
shock. Never spill liquid of any kind on the product.
10.The Clinical PC can be cleaned in accordance with normal clinical cleaning practices,
including wiping with water or medical grade wipes, provided no substance containing
acids or cleaning alkali liquids is used.
11.Medical grade wipes must not contain more than 80% alcohol content measured
against the total content of the wipe.

iii
Sécurité
INSTRUCTIONS IMPORTANTES RELATIVES À LA SECURITE
1. Pour débrancher la machine de l’alimentation électrique, éteignez l’interrupteur
d’alimentation et retirez le cordon d’alimentation de la prise murale. La prise murale
doit être facilement accessible et à proximité de la machine.
2. Lisez attentivement ces instructions. Conservez ces instructions pour une référence
future.
3. Suivez tous les avertissements et les instructions indiquées sur le produit.
4. Ne pas utiliser ce produit à proximité de l’eau.
5. Ne pas placer ce produit sur un chariot, un support ou une table. Le produit peut
tomber,causant de graves dommages à l’appareil.
6. Les fentes et les ouvertures dans le boîtier, l’arrière ou le fond sont prévues pour
la ventilation an d’assurer un fonctionnement able du produit et le protéger de la
surchauffe. Ces ouvertures ne doivent pas être obstruées ou couvertes. Les ouvertures
ne doivent jamais être bloquées en plaçant l’appareil sur un lit, un canapé, un tapis
ou autre surface similaire. Ce produit ne doit jamais être placé : à proximité ou sur un
radiateur, sur un registre de chaleur ou dans une installation intégrée à moins qu’une
ventilation adéquate soit prévue.
7. Ce produit doit être utilisé avec le type d’alimentation indiqué sur l’étiquette.Si
vous n’êtes pas sûr du type d’alimentation disponible, consultez votre revendeur ou
représentant local de l’entreprise.
8. Ne laissez rien reposer sur le cordon d’alimentation. Ne placez pas ce produit là oùdes
personnes peuvent marcher sur le cordon.
9. N’introduisez jamais d’objets d’aucune sorte dans ce produit à travers les fentes du
coffret car ils pourraient entrer en contact avec des points sous tension dangereux ou
court-circuiter des pièces. Ne renversez jamais de liquide d’aucune sorte sur le produit.
CE MARK
This device complies with the requirements of the EEC directive 2014/30/EU with
regard to “Electromagnetic compatibility” and 2014/35/EU “Low Voltage Directive”.
FCC
This device complies with part 15 of the FCC rules. Operation is subject to the following
two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that may
cause undesired operation.

iv
CAUTION ON LITHIUM BATTERIES
There is a danger of explosion if the battery is replaced incorrectly. Replace only
with the same or equivalent type recommended by the manufacturer. Discard used
batteries according to the manufacturer’s instructions.
Battery Caution
Risk of explosion if battery is replaced by an incorrectly type. Dispose of used battery
according to the local disposal instructions.
Safety Caution
Note: To comply with IEC60950-1 Clause 2.5 (limited power sources, L.P.S) related
legislation, peripherals shall be 4.7.3.2 “Materials for re enclosure” compliant.
4.7.3.2 Materials for re enclosures
For MOVABLE EQUIPMENT having a total mass not exceeding 18kg.the material of a
FIRE ENCLOSURE, in the thinnest signicant wall thickness used, shall be of V-1 CLASS
MATERIAL or shall pass the test of Clause A.2.
For MOVABLE EQUIPMENT having a total mass exceeding 18kg and for all STATIONARY
EQUIPMENT, the material of a FIRE ENCLOSURE, in the thinnest significant wall
thickness used, shall be of 5VB CLASS MATERIAL or shall pass the test of Clause A.1
AVERTISSEMENT SUR LES BATTERIES AU LITHIUM
Il y a un danger d’explosion si la batterie n’est pas remplacée correctement.
Remplacez-la uniquement par une batterie identique ou de type équivalent
recommandée par le fabricant.les batteries usagées doivent être mises au rebut
conformément aux instructions du fabricant.
Avertissement Batterie
Risque d’explosion si la batterie est remplacée par un élément incompatible.
Jetez les batteries usagées selon les instructions des dispositions locales .
Avertissement de sécurité
Remarque: Pour répondre à la norme IEC60950-1 alinéa 2.5 (sources d’énergie limitées,
LPS) liés la législation, les périphériques doivent être conforme 4.7.3.2 “Matériaux pour
enceinte coupe-feu»
4.7.3.2 “Matériaux pour équipements coupe-feu»
Pour les équipements mobiles ayant une masse totale n’excédant pas 18kg :
Les matériaux d’un équipement coupe-feu, dans l’épaisseur de paroi retenue la plus
signicativement mince, doivent être des matériels de CLASSE V-1 ou doivent passer le
test de l’article A.2.

v
Pour équipements mobiles ayant une masse totale supérieure à 18 kg et pour tous les
équipements FIXES :
Les matériaux d’un équipement coupe-feu dans l’épaisseur de paroi retenue la plus
signicativement mince, doivent être des matériels de CLASSE V-1, doivent être de
classe Matériel 5VB ou doivent passer le test de l’article A.1
LEGISLATION AND WEEE SYMBOL
2012/19/EU Waste Electrical and Electronic Equipment Directive on the treatment,
collection, recycling and disposal of electric and electronic devices and their
components.
The crossed dust bin symbol on the device means that it should not be disposed of
with other household wastes at the end of its working life. Instead, the device should
be taken to the waste collection centers for activation of the treatment, collection,
recycling and disposal procedure.
To prevent possible harm to the environment or human health from uncontrolled waste
disposal, please separate this from other types of wastes and recycle it responsibly to
promote the sustainable reuse of material resources.
Household users should contact either the retailer where they purchased this product,
or their local government ofce, for details of where and how they can take this item for
environmentally safe recycling.
Business users should contact their supplier and check the terms and conditions of
the purchase contract.
This product should not be mixed with other commercial wastes for disposal.

vi
Revision Description Date
1.0 • Initial release June 2020
Revision History
Changes to the original user manual are listed below:

vii
Table of Contents
1. Packing List.................................. 1
1-1. Standard Items................................................................1
1-2. Optional Items .................................................................2
2. System View.................................. 3
2-1. Front & Side View ............................................................3
2-2. Rear View.........................................................................3
2-3. I/O view............................................................................4
2-4. Dimensions......................................................................5
3. System Assembly ......................... 6
3-1. Open the Chassis Cover..................................................6
3-2. RAM Module Replacement.............................................7
3-3. HDD Replacement ..........................................................8
4. Specication................................. 9
5. Conguration............................... 11
5-1. D86U Motherboard ........................................................11
5-1-1. Motherboard Layout........................................................11
5-1-2. Connectors & Functions .................................................12
5-1-3. Jumper Setting ................................................................13
5-2. F16 Motherboard ..........................................................15
5-2-1. Motherboard Layout........................................................15
5-2-2. Connectors & Functions ................................................. 16
5-2-3. Jumper Setting ................................................................ 17

viii
The page is intentionally left blank.

1
1. Packing List
1-1. Standard Items
a. System
b. Power adapter
c. Power cord
d. RJ45-DB9 cable (x2, provided only for Kabylake/Skylake motherboard )
Note: Power cord will be supplied differently according to various region or country.
a. b.
c. d.

2
1-2. Optional Items
MSR

3
2. System View
2-1. Front & Side View
1. Touch screen
2. Built-in web cam
3. MSR cable hole
2-2. Rear View
1
3
2
4. VESA mounting holes
5. Safety label
6. Cable cover
4
5
6

4
2-3. I/O view
Skylake/Kabylake Motherboard
bcde
f
g
hijk
m
l
a
Item No. Description
a Mic in
b Line out
c COM4
d 2nd LAN
e USB 2.0(x2)
f LAN
g COM port 1, 2, 3 (from left to right)
hVGA
i DC in
j Power button
k DVI-D
l HDD slot
m USB 3.0(x4)
Android Qualcomm Motherboard
Item No. Description
a USB 2.0(x2)
b LAN
c USB 3.0(x2)
d COM port 1, 2 (from left to right)
e FeDP (option)
f Micro USB
g DC Jack 19V
h Power button
i Display port (option)
i
bcdfgh
ae

5
48mm
536mm
328mm
2-4. Dimensions

6
3. System Assembly
3-1. Open the Chassis Cover
The motherboard and RAM module can be replaced by opening the chassis cover,
which is located on the back side of the system. Please follow the steps below to
open the chassis cover.
1. Turn to the back side of the system
and loosen the screws (x2) to release
the cable cover first.
2. Loosen the screws (x8) to open the
back cover of the system.

7
Installing a RAM moudle
3. Slide the memory module into the
memory slot and press down until
the ejector clips snaps in place.
3-2. RAM Module Replacement
To remove and replace the RAM module, please open the chassis cover firstly
as steps dscribed in chapter 3-1.
Removing a RAM module
1. Find the memory slot at the right
side of the motherboard. (Refer
to Chapter 5-1-1).
2. Flip the ejector clips outwards to
remove the memory module from
the memory slot.

8
3-3. HDD Replacement
To remove and replace the HDD, please open the cable cover rstly as stpes dscribed
in chapter 3-1-1.
1. Find the HDD located at the right
side.
2. Pull the HDD tray from the system.
For easier removal pull the plastic
sheet (see picture) at the same
time.
3. Attach the HDD to the HDD tray and
slide it into the slot until it snaps in
place.
* Please note the top of the HDD
should be on the upper side.

9
4. Specication
Model Name QK22
Mainboard Skylake/Kabylake Android
CPU
Intel SKYLAKE/Kabylake U CPU
Celeron 3955U 2GHz, LLC 2M (15W)
i3-6100U/7100u 2.3GHz, LLC 3M
i5-6300U/7200u 2.4GHz
Qualcomm Snapdragon 450
Octa-core A53 (64bit) 8*1.8GHz
Chipset SoC built-in CPU N/A
System memory DDR3L1600MHz (8GB Max),
1 Channel 3GB LPDDR3
Graphic memory Intel Graphic (Gen 9) DX12,
dene on CPU Adreno506, 650MHz
LAN controller (Giga LAN) Realtek RTL8111E-VL-CG
10/100/1000 baseT LAN AX88179
LCD/Touch Panel
LCD size 21.5" LED LCD
Brightness 250 nits
Maximal resolution 1920 x 1080
Touch screen type True at projected capacitive touch
Storage
SDD 2.5" Slim SDD bay, SATA SSD N/A
SDD 128GB-1TB, larger capacity
available on demand N/A
eMMC N/A 32GB eMMC
Peripherals
Webcam (Build-in, optional) 2M Webcam
MSR-right side (optional) 3 Track(USB)
Expansion
Mini PCI-E socket 1 (half-length) N/A
External I/O Ports
USB3.0 4 x USB Type A 2 x USB Type A
USB2.0 2 x USB Type A 2 x USB Type A
Micro USB N/A 1 (client, no support host function)
Serial / COM
3 x RJ48 (0V/5V/12V default BIOS
setting 0V), 1 x RS-232/422 without
power
2 x DB-9/M (COM1 / COM2)
LAN 1 x RJ-45
2nd LAN mini-PCIe to F40 (port on F40) N/A
VGA 1 x DB 15 female N/A
Audio jack 1 x Mic-in, 1 x Line-out N/A
DC jack 1 x Latch type (4pin)
Power button 1
DVI-D 1(option) N/A
FeDP N/A 1(option)
Display port N/A 1(option)
Thermal Solution
Thermal solution Fanless Fanless

10
Model Name QK22
Mainboard Skylake/Kabylake Android
Audio
Speaker 2 x 2W
Communication
WiFi 802.11 b/g/n/ac WLAN card IEEE 802.11 a/b/g/n/ac
Power
Power adapter DC 19V / 90W DC 19V / 65W
Environment
EMC & Safety FCC/CE Class A/LVD/EN 60601-1-2 FCC, Class A, CE, LVD
Operating temperature 0°C ~ 35°C (32°F ~ 95°F)
Storage temperature -20° ~ 60°C (-4°F ~ 140°F)
Humidity 25% - 85% RH non-condensing
Dust & Water proof IP 54 (front panel)
Dimensions (W x D x H) 536 x 328 x 48 mm
Weight (N.W./G.W.) 8kg /9kg
Mounting 75mm x 75mm Standard VESA / Panel mount
OS support
Windows 7 pro(64-bit), POSReady
7 (64-bit), Windows 8.1 (64-bit),
Windows Embedded industry 8.1(64-
bit), Windows 10 (64-bit), Windows 10
IOT (64-bit)
Linux
Android 9.0
* This specication is subject to change without prior notice.

11
BAT
C11
C13
C14
SATA1
C16
C18
JP4
RJ11_1
USB3
RJ45_1
USB2
RJ45_2
USB1
RJ48_1
VGA1
PWR1 PWR2
SW1
CN25
CN24
CN17
JP3
JP2
CN20
CN23
CN22
CN19
CN21
SATA0
SKT1
MINI_PCIE1
DDR3_A1
CN15
CN12
SKT2
CN9
CN10
CN8
JP1 CN4
CN5
CN1
CN2
CN6
CN7
CN3
5. Conguration
5-1. Skylake/Kabylake Motherboard
5-1-1. Motherboard Layout

12
Connector Function
CN1 Front I/O board
CN2 Inverter connector
CN3 LVDS connector
CN4 NFC
CN5 HDD LED connector
CN6 USB connector
CN7 System FAN connector
CN8 LPT port connector
CN9 Smart device connector
CN10 Debug port
CN11 Speaker & MIC connector
CN12 40 pin external connector
CN13 Audio connector(right)
CN14 Audio connector(left)
CN15 two color LED
CN16 SATA power connector
CN17/18 USB connector
CN19 SDR connector
CN20 Battery connector
CN21 Power LED connector
CN22 PS/2 connector
CN23 COM5 connector
CN24 Wide range connector
CN25 Power button connector
CN26 LCM connector
CN27 51 pin connector
PWR1/PWR2 DC Jack
RJ11_1 Cash drawer connector
RJ45_1 LAN connector
RJ45_2 COM1/ COM2
RJ48_1 COM3
DDR3_A1 DDR3 SO-DIMM
SATA0/SATA1 SATA connector
USB1/USB2 USB3.0
USB3 USB2.0
VGA1 CRT connector
SW1 Power button
MINI_PCIE1 MINI PCIE
JP1 Hardware reset
JP2 RTC reset
JP3 LCD ID setting
JP4 Cash drawer power setting
5-1-2. Connectors & Functions