IEI Technology AFL3-12C-ULT3 User manual

AFL3-12C-ULT3 Panel PC
Page I
User Manual
AFL3-12C-ULT3
MODEL:
Flat Bezel Panel PC with Intel® Core™ i5-6300U / Celeron® 3855U
CPU, Touchscreen, Four USB Ports, Dual GbE LAN,
RS-232/422/485, HDMI, Wi-Fi 802.11a/b/g/n/ac and RoHS
Rev. 1.00 - May 7, 2018
User Manual

AFL3-12C-ULT3 Panel PC
Page II
Revision
Date Version Changes
May 7, 2018 1.00 Initial release

AFL3-12C-ULT3 Panel PC
Page III
Safety Instructions
Warning! Read the user manual before connecting the system to the power
source.
Vorsicht! Bitte lesen Sie die Bedienungsanleitung, bevor Sie das System an eine
Stromquelle anschließen.
Attention! Avant de brancher le système à la source d'alimentation, consultez le
mode d'emploi.
Avvertenza! Consultare il manuale utente prima di collegare il sistema
all'alimentatore.
Atención! Lea atentamente este manual del usuario antes de operar la fuente de
alimentación.
警告！在將系統連接到電源之前，請仔細閱讀使用手冊。
警告！在将系统连接到电源之前，请仔细阅读使用手册。
Warning! To prevent the system from overheating, do not operate it in an area that
exceeds the maximum operating temperature described in the user manual.
Vorsicht! Um eine Überhitzung des Systems zu vermeiden, betreiben Sie es
ausschließlich im zulässigen Betriebstemperaturbereich. Dieser ist in der
Bedienungsanleitung vermerkt.
Attention! Pour éviter la surchauffe du système, ne l'utilisez pas dans une zone
dont la température dépasse les limites décrits dans le mode d'emploi.
Avvertenza! Per evitare che il sistema si surriscaldi, non utilizzarlo in aree che
superino la temperatura massima d'esercizio descritta nel manuale utente.
Atención! Para evitar el excesivo calentamiento del sistema, no opere en las
condiciones de temperatura superior a lo recomendado en este manual del
usuario.
警告！為防止系統過熱，不要在使用手冊上記載的產品工作溫度範圍之外操作此系
統。
警告！为防止系统过热，不要在使用手册上记载的产品工作温度范围之外操作此系
统。

AFL3-12C-ULT3 Panel PC
Page IV
Warning! Use only the adapter and power cord approved for this system. Use of
another type of adapter may risk fire or explosion. Please refer to the user manual
for the power adapter specifications.
Vorsicht! Nur zugelassene Netzteile und Netzkabel dürfen verwendet werden. Die
Benutzung von anderen Netzteilen kann einen Brand oder eine Explosion zur
Folge haben. Prüfen Sie die jeweiligen Spezifikationen in der
Bedienungsanleitung.
Attention! Utilisez exclusivement le câble d'alimentation et l’adaptateur
homologués pour ce système. L’utilisation d’un autre type d’adaptateur risquerait
de provoquer un incendie ou une explosion. Veuillez référer au mode d'emploi
pour les spécifications de l'adaptateur d'alimentation.
Avvertenza! Utilizzare solo l'adattatore e il cavo di alimentazione approvati per
questo sistema. L'uso di un altro tipo di adattatore può causare rischio d'incendio
o esplosione. Si prega di fare riferimento al manuale utente per le specifiche
sull'alimentazione.
Atención! Utilice solamente el adaptador de corriente alterna (CA) con Marcas
Conformidad otorgadas. Cualquier otro adaptador no otorgado aumenta el riesgo
de explosión o incendio. Por favor consulte el manual del usuario para las
especificaciones del adaptador de alimentación.
警告！只能使用經過認證、適用於本系統的電源變壓器與電源線。使用不適用的電
源變壓器將可能導致火災或爆炸。電源變壓器規格請參考使用手冊。
警告！只能使用经过认证，适用于本系统的电源适配器与电源线。使用不适用的电
源适配器将可能导致火灾或爆炸。电源适配器规格请参考使用手册。
Warning! Ultimate disposal of this product should be handled according to all
national laws and regulations.
Vorsicht! Die Entsorgung dieses Produkts sollte gemäß allen Bestimmungen und
Gesetzen des Landes erfolgen.
Attention! La mise au rebut ou le recyclage de ce produit sont généralement
soumis aux lois et/ou directives de respect de l'environnement. Renseignez-vous
auprès de l'organisme compétent.
Avvertenza! Lo smaltimento di questo prodotto deve essere eseguito secondo le
leggi e i regolamenti locali.
Atención! La disposición final de residuos de este producto se debe cumplir con
las normativas y leyes del país.
警告！本產品的廢棄處理應根據該國家的法律和規章進行。
警告！本产品的废弃处理应根据该国家的法律和规章进行。

AFL3-12C-ULT3 Panel PC
Page V
Copyright
COPYRIGHT NOTICE
The information in this document is subject to change without prior notice in order to
improve reliability, design and function and does not represent a commitment on the part
of the manufacturer.
In no event will the manufacturer be liable for direct, indirect, special, incidental, or
consequential damages arising out of the use or inability to use the product or
documentation, even if advised of the possibility of such damages.
This document contains proprietary information protected by copyright. All rights are
reserved. No part of this manual may be reproduced by any mechanical, electronic, or
other means in any form without prior written permission of the manufacturer.
TRADEMARKS
All registered trademarks and product names mentioned herein are used for identification
purposes only and may be trademarks and/or registered trademarks of their respective
owners.

AFL3-12C-ULT3 Panel PC
Page VI
Manual Conventions
WARNING
Warnings appear where overlooked details may cause damage to the
equipment or result in personal injury. Warnings should be taken
seriously.
CAUTION
Cautionary messages should be heeded to help reduce the chance of
losing data or damaging the product.
NOTE
These messages inform the reader of essential but non-critical
information. These messages should be read carefully as any directions
or instructions contained therein can help avoid making mistakes.
HOT SURFACE
This symbol indicates a hot surface that should not be touched without
taking care.

AFL3-12C-ULT3 Panel PC
Page VII
Table of Contents
1 INTRODUCTION.......................................................................................................... 1
1.1 OVERVIEW.................................................................................................................. 2
1.2 MODEL VARIATIONS ................................................................................................... 3
1.3 FEATURES................................................................................................................... 3
1.4 FRONT PANEL............................................................................................................. 4
1.5 BOTTOM PANEL.......................................................................................................... 5
1.6 REAR PANEL............................................................................................................... 5
1.7 SIDE PANEL ................................................................................................................ 6
1.8 SYSTEM SPECIFICATIONS............................................................................................ 6
1.9 DIMENSIONS............................................................................................................... 9
2 UNPACKING............................................................................................................... 10
2.1 UNPACKING...............................................................................................................11
2.2 PACKING LIST............................................................................................................11
2.3 OPTIONAL ITEMS...................................................................................................... 13
3 INSTALLATION ......................................................................................................... 15
3.1ANTI-STATIC PRECAUTIONS...................................................................................... 16
3.2 INSTALLATION PRECAUTIONS................................................................................... 16
3.3 INSTALLATION AND CONFIGURATION STEPS ............................................................. 17
3.4 REMOVING THE BACK COVERS ................................................................................ 17
3.5 MSATA MODULE INSTALLATION.............................................................................. 18
3.6 HDD INSTALLATION................................................................................................. 21
3.7 SERIAL PORT CONFIGURATION AND CONNECTION.................................................... 23
3.7.1 RS-232 Serial Port Connection........................................................................ 23
3.7.1.1 RS-232 Serial Port Pinouts ....................................................................... 24
3.7.2 RS-232/422/485 Serial Port Connection ......................................................... 24
3.8AT/ATX MODE SELECTION...................................................................................... 25
3.8.1 AT Power Mode................................................................................................ 25
3.8.2 ATX Power Mode............................................................................................. 26
3.9 MOUNTING THE SYSTEM .......................................................................................... 26

AFL3-12C-ULT3 Panel PC
Page VIII
3.9.1 Wall Mounting.................................................................................................. 26
3.9.2 Panel Mounting................................................................................................ 30
3.9.3 Cabinet and Rack Installation ......................................................................... 33
3.9.4 Arm Mounting.................................................................................................. 36
3.9.5 Stand Mounting................................................................................................ 38
3.10 POWERING ON THE SYSTEM................................................................................... 39
3.11 RESET THE SYSTEM................................................................................................ 40
3.12 SOFTWARE INSTALLATION ...................................................................................... 41
3.13 DRIVER DOWNLOAD .............................................................................................. 42
3.14 INSTALLING WINDOWS 7FROM USB 3.0 DRIVES................................................... 43
4 BIOS SETUP................................................................................................................ 45
4.1 INTRODUCTION......................................................................................................... 46
4.1.1 Starting Setup................................................................................................... 46
4.1.2 Using Setup...................................................................................................... 46
4.1.3 Getting Help..................................................................................................... 47
4.1.4 BIOS Menu Bar................................................................................................ 47
4.2 MAIN........................................................................................................................ 48
4.3ADVANCED............................................................................................................... 49
4.3.1 ACPI Settings................................................................................................... 50
4.3.2 Super IO Configuration ................................................................................... 51
4.3.2.1 Serial Port n Configuration....................................................................... 51
4.3.2.1.1 Serial Port 1 Configuration................................................................ 52
4.3.2.1.2 Serial Port 2 Configuration................................................................ 53
4.3.1 Hardware Monitor ........................................................................................... 54
4.3.2 iWDD H/W Monitor......................................................................................... 55
4.3.3 RTC Wake Settings........................................................................................... 56
4.3.4 Serial Port Console Redirection ...................................................................... 57
4.3.4.1 Legacy Console Redirection Settings....................................................... 58
4.3.4.2 Console Redirection Settings.................................................................... 59
4.3.5 CPU Configuration.......................................................................................... 61
4.3.6 SATA Configuration ......................................................................................... 63
4.3.7 USB Configuration........................................................................................... 65
4.3.8 IEI Feature....................................................................................................... 66
4.4 CHIPSET................................................................................................................... 67

AFL3-12C-ULT3 Panel PC
Page IX
4.4.1 System Agent (SA) Configuration .................................................................... 67
4.4.1.1 Graphics Configuration............................................................................. 68
4.4.1.1.1 LCD Control ...................................................................................... 69
4.4.1.2 Memory Configuration ............................................................................. 70
4.4.2 PCH-IO Configuration .................................................................................... 71
4.4.2.1 PCI Express Configuration....................................................................... 72
4.4.2.2 HD Audio Configuration........................................................................... 73
4.5 SECURITY................................................................................................................. 74
4.6 BOOT........................................................................................................................ 75
4.7 SAVE &EXIT............................................................................................................ 77
5 SYSTEM MAINTENANCE ....................................................................................... 79
5.1 SYSTEM MAINTENANCE INTRODUCTION .................................................................. 80
5.2ANTI-STATIC PRECAUTIONS...................................................................................... 80
5.3 TURN OFF THE POWER.............................................................................................. 81
5.4 SO-DIMM MODULE REPLACEMENT........................................................................ 81
6 INTERFACE CONNECTORS................................................................................... 84
6.1 PERIPHERAL INTERFACE CONNECTORS..................................................................... 85
6.2 INTERNAL PERIPHERAL CONNECTORS...................................................................... 86
6.2.1 Audio Connector (AUDIO_OUT1).................................................................. 87
6.2.2 Audio Out Connector (AUDIO_OUT_L1)....................................................... 87
6.2.1 Audio Out Connector (AUDIO_OUT_R1)....................................................... 88
6.2.2 Battery Connector (BAT1) ............................................................................... 88
6.2.3 Digital I/O Connector (DIO1)......................................................................... 89
6.2.1 Fan Connector (CPU/FAN1) ........................................................................... 89
6.2.2 Inverter Connector (INVERTER1)................................................................... 89
6.2.3 LVDS Connector (LVDS1)............................................................................... 90
6.2.4 Microphone Connector (DMIC1) .................................................................... 90
6.2.5 PCIe Mini Connector, Full-Size/Half-size (M_PCIE1) ................................... 91
6.2.6 Power Button Connector (PWR_BTN1) .......................................................... 92
6.2.7 Power LED Connector (PW_LED1)................................................................ 92
6.2.8 SATA Connector (SATA1)................................................................................. 92
6.2.9 USB Connector (HUB_USB1)......................................................................... 93
6.2.10 USB Connector (CAM_USB1)....................................................................... 93

AFL3-12C-ULT3 Panel PC
Page X
6.2.11 USB Connector (RFID_USB1)....................................................................... 93
6.2.12 USB Connector (TOUCH_USB1).................................................................. 94
6.2.13 USB Power Connector (USB_HUB_P1)....................................................... 94
6.2.1 U72 Firmware Programming Connector (JP1)............................................... 94
6.2.1 Debug Connector (DBG_PORT1)................................................................... 95
6.2.1 Debug Connector, EC (LPT_DB1) .................................................................. 95
6.2.1 SPI Flash Connector (JSPI1)........................................................................... 95
6.2.1 SPI Flash Connector, EC (JSPI2).................................................................... 96
6.2.2 Touch Panel Connector (TOUCH1)................................................................. 96
6.3 EXTERNAL INTERFACE PANEL CONNECTORS............................................................ 97
6.3.1 Ethernet Connectors (LAN1 & LAN2)............................................................. 97
6.3.2 HDMI Connector (HDMI1)............................................................................. 98
6.3.3 Power Connector (PWR1)............................................................................. 98
6.3.1 RS-232 RJ-45 Serial Port (COM1).................................................................. 98
6.3.2 RS-232/422/485 DB-9 Serial Port (COM2)..................................................... 99
6.3.3 USB 3.0 Connectors (USB3_CON1)................................................................ 99
6.3.4 USB 2.0 Connectors (USB2_CON1).............................................................. 100
6.4 PRECONFIGURED JUMPER SETTINGS....................................................................... 100
6.4.1 LVDS Panel Voltage Selection Jumper (J_VLVDS1)..................................... 101
6.4.2 LVDS Panel Resolution Selection Jumper (SW1).......................................... 101
6.4.3 Flash Descriptor Security Override Jumper.................................................. 102
A REGULATORY COMPLIANCE............................................................................ 103
B SAFETY PRECAUTIONS....................................................................................... 109
B.1 SAFETY PRECAUTIONS............................................................................................110
B.1.1 General Safety Precautions............................................................................110
B.1.2 Anti-static Precautions ...................................................................................111
B.1.3 Product Disposal............................................................................................112
B.2 MAINTENANCE AND CLEANING PRECAUTIONS .......................................................113
B.2.1 Maintenance and Cleaning.............................................................................113
B.2.2 Cleaning Tools................................................................................................113
C BIOS MENU OPTIONS............................................................................................115
D WATCHDOG TIMER ...............................................................................................118
E HAZARDOUS MATERIALS DISCLOSURE ....................................................... 121

AFL3-12C-ULT3 Panel PC
Page XI
List of Figures
Figure 1-1: AFL3-12C-ULT3 Flat Bezel Panel PC.........................................................................2
Figure 1-2: Front View....................................................................................................................4
Figure 1-3: Bottom Panel...............................................................................................................5
Figure 1-4: Rear View.....................................................................................................................5
Figure 1-5: Side View......................................................................................................................6
Figure 1-6: Dimensions (mm)........................................................................................................9
Figure 3-1: Back Cover Retention Screws.................................................................................17
Figure 3-2: Aluminum Cover Retention Screws........................................................................18
Figure 3-3: mSATA Module Slot Location..................................................................................19
Figure 3-4: Removing the Retention Screw and Standoff........................................................19
Figure 3-5: Installing an mSATA Module ...................................................................................20
Figure 3-6: Securing the mSATA Module...................................................................................20
Figure 3-7: HDD Bracket Retention Screws...............................................................................21
Figure 3-8: HDD Retention Screws.............................................................................................22
Figure 3-9: HDD Installation ........................................................................................................22
Figure 3-10: Serial Device Connector.........................................................................................24
Figure 3-11: AT/ATX Switch Location.........................................................................................25
Figure 3-12: Wall-mounting Bracket...........................................................................................27
Figure 3-13: Chassis Support Screws........................................................................................29
Figure 3-14: Secure the Panel PC...............................................................................................29
Figure 3-15: Cutout Dimensions.................................................................................................30
Figure 3-16: Panel Mounting Kit Installation .............................................................................31
Figure 3-17: Securing Panel Mounting Brackets.......................................................................32
Figure 3-18: Rack Mounting Kit Installation ..............................................................................34
Figure 3-19: Securing Rack Mounting Brackets........................................................................35
Figure 3-20: Install into a Rack/Cabinet .....................................................................................35
Figure 3-21: Arm Mounting Retention Screw Holes..................................................................37
Figure 3-22: Arm Mounting..........................................................................................................37
Figure 3-23: Stand Mounting (Stand-A/Bxx)..............................................................................38
Figure 3-24: Powering On the System........................................................................................39
Figure 3-25: Reset Button Location............................................................................................40

AFL3-12C-ULT3 Panel PC
Page XII
Figure 3-26: IEI Resource Download Center..............................................................................41
Figure 5-1: SO-DIMM module Location ......................................................................................82
Figure 5-2: SO-DIMM Installation ................................................................................................82
Figure 6-1: Main Board Layout Diagram ....................................................................................85

AFL3-12C-ULT3 Panel PC
Page XIII
List of Tables
Table 1-1: Model Variations...........................................................................................................3
Table 1-2: System Specifications..................................................................................................8
Table 3-1: RS-232 Serial Port (COM1) Pinouts ..........................................................................24
Table 3-2: RS-232/422/485 Serial Port (COM2) Pinouts ............................................................25
Table 6-1: Peripheral Interface Connectors...............................................................................87
Table 6-2: Audio Connector (AUDIO_OUT1) Pinouts................................................................87
Table 6-3: Audio Out Connector (AUDIO_OUT_L1) Pinouts....................................................87
Table 6-4: Audio Out Connector (AUDIO_OUT_R1) Pinouts....................................................88
Table 6-5: Battery Connector (BAT1) Pinouts...........................................................................88
Table 6-6: Digital I/O Connector (DIO1) Pinouts........................................................................89
Table 6-7: Fan Connector (CPU/FAN1) Pinouts.........................................................................89
Table 6-8: Inverter Connector (INVERTER1) Pinouts................................................................89
Table 6-9: LVDS Connector (LVDS1) Pinouts............................................................................90
Table 6-10: Microphone Connector (DMIC1) Pinouts ...............................................................90
Table 6-11: PCIe Mini Connector (M_PCIE1) Pinouts ...............................................................91
Table 6-12: Power Button Connector (PWR_BTN1) Pinouts....................................................92
Table 6-13: Power LED Connector (PW_LED1) Pinouts...........................................................92
Table 6-14: SATA Connector (SATA1) Pinouts .........................................................................92
Table 6-15: USB Connector (HUB_USB1) Pinouts....................................................................93
Table 6-16: USB Connector (CAM_USB1) Pinouts....................................................................93
Table 6-17: USB Connector (RFID_USB1) Pinouts ...................................................................93
Table 6-18: USB Connector (TOUCH_USB1) Pinouts...............................................................94
Table 6-19: USB Power Connector (USB_USB_P1) Pinouts....................................................94
Table 6-20: U72 Firmware Programming Connector (JP1) Pinouts ........................................94
Table 6-21: Debug Connector (DBG_PORT1) Pinouts..............................................................95
Table 6-22: EC Debug Connector (LPT_DB1) Pinouts..............................................................95
Table 6-23: SPI Flash Connector (JSPI1) Pinouts.....................................................................96
Table 6-24: EC SPI Flash Connector (JSPI2) Pinouts...............................................................96
Table 6-25: Touch Panel Connector (TOUCH1) Pinouts...........................................................96
Table 6-26: Rear Panel Connectors............................................................................................97
Table 6-27: Ethernet Connectors (LAN1 & LAN2) Pinouts.......................................................97

AFL3-12C-ULT3 Panel PC
Page XIV
Table 6-28: HDMI Connector (HDMI1) Pinouts...........................................................................98
Table 6-29: Power Connector (PWR1) Pinouts..........................................................................98
Table 6-30: RS-232 RJ-45 Serial Port (COM1) Pinouts..............................................................98
Table 6-31: RS-232/422/485 DB-9 Serial Port (COM2) Pinouts.................................................99
Table 6-32: USB 3.0 Connectors (USB_CON12) Pinouts..........................................................99
Table 6-33: USB 2.0 Connectors (USB2_CON1) Pinouts........................................................100
Table 6-34: Preconfigured Jumpers .........................................................................................100
Table 6-35: LVDS Voltage Selection Jumper (J_VLVDS1) Settings ......................................101
Table 6-36: LVDS Resolution Selection Jumper (SW1) Settings...........................................101
Table 6-37: Flash Descriptor Security Override Jumper Settings.........................................102

AFL3-12C-ULT3 Panel PC
Page XV
List of BIOS Menus
BIOS Menu 1: Main.......................................................................................................................48
BIOS Menu 2: Advanced..............................................................................................................49
BIOS Menu 3: ACPI Settings .......................................................................................................50
BIOS Menu 4: Super IO Configuration........................................................................................51
BIOS Menu 5: Serial Port n Configuration .................................................................................51
BIOS Menu 6: Hardware Monitor.................................................................................................54
BIOS Menu 7: iWDD H/W Monitor ...............................................................................................55
BIOS Menu 8: RTC Wake Settings..............................................................................................56
BIOS Menu 9: Serial Port Console Redirection.........................................................................57
BIOS Menu 10: Legacy Console Redirection Settings .............................................................58
BIOS Menu 11: Console Redirection Settings...........................................................................59
BIOS Menu 12: CPU Configuration.............................................................................................61
BIOS Menu 13: SATA Configuration...........................................................................................63
BIOS Menu 14: USB Configuration.............................................................................................65
BIOS Menu 15: IEI Feature...........................................................................................................66
BIOS Menu 16: Chipset................................................................................................................67
BIOS Menu 17: System Agent (SA) Configuration....................................................................67
BIOS Menu 18: Graphics Configuration.....................................................................................68
BIOS Menu 19: LCD Control........................................................................................................69
BIOS Menu 20: Memory Configuration.......................................................................................70
BIOS Menu 21: PCH-IO Configuration........................................................................................71
BIOS Menu 22: PCI Express Configuration ...............................................................................72
BIOS Menu 23: HD Audio Configuration....................................................................................73
BIOS Menu 24: Security...............................................................................................................74
BIOS Menu 25: Boot.....................................................................................................................75
BIOS Menu 26: Save & Exit..........................................................................................................77

AFL3-12C-ULT3 Panel PC
Page 1
1 Introduction
Chapter
1

AFL3-12C-ULT3 Panel PC
Page 2
1.1 Overview
Figure 1-1: AFL3-12C-ULT3 Flat Bezel Panel PC
The AFL3-12C-ULT3 series is a quad-core Intel®Core™ i5-6300U or Intel®Celeron®
3855U powered flat bezel touchscreen panel PC with a rich variety of functions and
peripherals. The flat-bezel design is ideal for easy and simplified integration into various
applications.
The Intel®Core™ i5-6300U / Celeron®3855U is a System-on-Chip (SoC) that ensures
optimal memory, graphics, and peripheral I/O support. The system comes with 4.0 GB of
DDR4 SO-DIMM memory ensuring smooth data throughputs with reduced bottlenecks
and fast system access.
One RS-232/422/485 serial port, one RS-232 serial port and four external USB ports
ensure simplified connectivity to a variety of external peripheral devices. Wi-Fi capabilities
and two RJ-45 Ethernet connectors provide the system with smooth connection to an
external LAN.

AFL3-12C-ULT3 Panel PC
Page 3
1.2 Model Variations
There are several models in the AFL3-12C-ULT3 series. The model numbers and model
variations are listed below.
Model Processor
AFL3-12C-ULT3-C/PC/4G Intel®Celeron®3855U (2M cache, 1.60 GHz)
AFL3-12C-ULT3-i5/PC/4G Intel® Core™ i5-6300U (3M cache, up to 3.00 GHz)
Table 1-1: Model Variations
1.3 Features
The AFL3-12C-ULT3 features are listed below:
Flat-bezel LCD with LED backlight
Intel®Core™ i5-6300U or Intel®Celeron®3855U processor
Preinstalled with 4 GB of DDR4 memory (system max. 8 GB)
Projected capacitive type touchscreen
Wi-Fi 802.11a/b/g/n/ac high speed wireless
Two PCIe GbE RJ-45 connectors
Two internal speakers
Two USB 3.0 ports and two USB 2.0 ports
One RS-232/422/485 serial port by D-sub 9 connector and one RS-232 serial
port by RJ-45 connector
Optional RFID reader
Optional magnetic stripe card reader
12 V–30 V wide range DC power input
IP 64 compliant front panel

AFL3-12C-ULT3 Panel PC
Page 4
1.4 Front Panel
The front side of the AFL3-12C-ULT3 is a flat-bezel panel with a TFT LCD screen
surrounded by a PC/ABS plastic frame (Figure 1-2).
Figure 1-2: Front View
There is a power LED indicator located on the front panel. The status descriptions of the
power LED indicator are listed below.
Off: power cord not attached or power supply failure
Solid amber: the system is connected to a power source and is ready to be
turned on.
Solid green: the system is turned on.