Touch Two C5 User manual


Thank you for purchasing the C5 wireless earbuds !The C5 useof the
newest technology, supports all function by touch control, and has
exceptional audio quality. The C5 focuses on improving and enhancing user
experience by providing a comfortable fit and ergonomic in-ear design. It
is designed to fit the auricle perfectly so that the user is free from pressure
and distending pain during prolonged use. With the Porta ble and Wireless
Magsafe charging, you can enjoy charging anytime and anywhere. For the
best user experience, please read this manual carefully before initial use
of the C5 earbuds
Safety Rules
1. For safety, please comply with the rules mentioned in this manual
2. Keep device away from sharp edges, uneven surfaces, metal objects,
and knock out.
3.Do not open, dismantle or attempt to repair the earbuds.Doing so may
cause accidental fire, electronic board failure, or damage to the earbuds.
All warranty will be cancel.
4. Do not wipe or clean the earbuds with oils or any volatile liquids.
5. Do not use the earbuds in places where potential personal safety is
atrisk or in danger.
brief introduction
2

— C5 Bluetooth headset 1 pair
— Charging Cable 1
— Medium silicone ear cap 1 pair
— Small silicone ear cap 1 pair
① Charging storage box
② Cavity
③ battery indicator
④ microphone
⑤ Silicone ear cap
⑥ Silicone plug
Product Information
Packing details
— Instruction manual 1 serving
— Charging storage box 1
— Hanging rope 1
— Packing box 1 set
①
④
②⑦
3
5
6
3

1. Head phone wearing me thod
R/L is printed on the earphone case, please wear it in the correct direction,
the sound quality will be be tter!
LED position down
2. Connect to Phone:
A.Take the earbuds out of charging case and remove the PET insulator.
Put the earbuds back in the charging case to activate.The earbuds will now
power on automatically once you take them out of the case
B.Put the L and R earbuds into your ears. The L and R earbud will find
each other and pair. Next, the tone"connected will be heard
C.When the two earbuds successfully pair, the tone"Left channel, Right
channel"will be heard Activate Bluetooth onyour phone. On the device list,
connect to the"Touch Two C5and then the tone second device connected
wil be heard
ATTENTION:
PARING TO THE PHONE IS ONLY REQUIRED FOR THE FIRST TIME YOU
CONNECT. AFTER THE FIRST TIME, THE EARBUDS WILL
AUTOMATICALLY CONECT TO YOUR PHONE WHEN YOU REMOVE THEM
FROM THE CASE
D.How to use the single ear: Take out the single earbuds from the
charging box to enter the red and blue lights alternately which is connection
succeeded. If the Bluetooth device name is not found, touch the surface twice
to search and connected .
Quick Start Guide
4

3.Touch Functions:
Next:Double click on the right ear touch surface.
Volume reduction:Long press 2S of right ear surface.
Shut down:Long press left ear touch area for 4S
Previous:Click twice on the left ear touch area
Volume increase:Long press left ear touch area for 2S
(Note:Left and right devid can be operated)
Activate voice assistant:Continuously click the touch panel three
times
(Note:in standby mode)
Call function:Click once on the touch surface to answer or
hang up the phone .
Reject the call:Double click on the touch surface
Play or pause music:Click once on the touch area
5

ATTENTION:
PLEASE REMOVETHE PROTECTIVE COVER ON THE EARBUDS BEFORE
OPERATION. PLEASE KEEP AWAY FROM RADIO INTERFERENCE AND
AVOID NOISY ENVIRONMENTS WHENUSING EABUDS PLEASE REPLAY
THE HIGHT QUALITY FORMAT OF MUSIC OR LOCAL MUSIC OF THE
DEVICE
4. Charging Case
A. Put the earbuds into the case exactly, the battery box wil automatically
charge the earphones until they are full.
B. Earbuds will automatically turn off once they are placed into the
charging case
C. USB outlet supports 5V/1.5A output, which can provide emergency
charging for mobile phones and other electronic products
ATTENTION:
REMOVE THE INSULATION COVER BEFORE INITIAL USE. RECHARGE THE
CHARGING CASE IF NOT USED FOR OVER 90 DAYS. ONLY USE GOOD
OUALITY WIRELESS CHARGING TRANSMITTER AND CHARGING CABLE.
THE EARBUD LED LIGHT WILL TURN BLUE WHEN IT IS FULLY CHARGED
5. Single Earbud Mode:
The L/R Earbud can used alone to connect to your Phone. On your phone,
enter the Bluetooth device connection list and remove the"Touch Two C5 "
from the list. Redo the steps for Connect to Phone"but with only the L/R
earbud.
6

1. Earbud parameters:
Bluetooth Version: 5.0
Operation Voltage: 3.2V-4 2V
Impedance: 32Ω
Speakersensitivity: 105db
Speaker Bandwidth: 20-20 KHZ
2. Charging case Parameters:
Large capacity battery
DC Charging Volta ge: DC/5V
DC charge Current: 1A
DC output Current: Maximum 1. 5A
Microphone Sensitivity: -42+-2db
Earbud frequen cy: 2. 4-2.48GHZ
Compatible: A2DP/HFP/HSP/AVRCPEarbud
Working range: 10M
Single eartalk time: 6hrs
Music play: 4-5hrs
Single earbud standby time: 80 hrs
Product Parameter
7

Troubleshooting Guide
Put the phone closer to the
main earb ud or keep ifrom
the oute r inter ference signal
The volume is too high or
the envi ronment is to o noisy
Can talk, but red
indicator illuminates
malfunction
Caused by environmental
interference or Sound source
equipment is far away
the reason Solution
Unable to start
Silent after matching
Charging without
prompt
Headset
Automatic shut-down
Headphones
have echo
The call has a noise
The other party’s
voice is small
Low battery
Match operation is incorrect
The battery is low,
Bright red indicator
The headphones are
not put well
Low battery
Charge the headset
Rematch
Clear the headset immediately
Check if the headphones
are in place
Charge the headset
volume adjustment
Or change places
Change place or will
The distance of the
source device is close
Adjust the position of the
headset And adjust the volume
The headset is not
worn correctly
Bad signal,
Intermittent
Too far or outside
interference
8
Table of contents