TOUGHBUILT TB-H2S4-LL-M150-R1 Assembly instructions

1
150m360° ROTARY
LASER LEVEL KIT
+ROLLING LASER RECEIVER
OPERATING
/ SAFETY
INSTRUCTIONS
DE 150mROTIERENDER 360° LASERNIVELLIERSATZ
+ROLLENDER LASEREMPFÄNGER
BETRIEBS- / SICHERHEITSANWEISUNGEN
FR KIT NIVEAU LASER PIVOTANT À 360°
+RÉCEPTEUR LASER ROULANT 150m
CONSIGNES D'UTILISATION ET DE SÉCURITÉ
ES KIT DE NIVEL LÁSER GIRATORIO DE 360º
+RECEPTOR LÁSER RODANTE DE 150m
INSTRUCCIONES DE USO/SEGURIDAD
TB-H2S4-LL-M150-R1

2
LANGUAGES
English 3
Deutsch 41
Français 79
Español 117
IMPORTANT! Read all safety warnings
and instructions before using.
WICHTIG! Lesen Sie vor der Verwend-
ung alle Sicherheitshinweise und
Anweisungen.
IMPORTANT! Lisez tous les
avertissements relatifs à la sécurité
et toutes les instructions avant
d'utiliser l'appareil.
¡IMPORTANTE! Lea todas las
advertencias de seguridad
e instrucciones antes de usar.

3
150m360° ROTARY
LASER LEVEL KIT
+ROLLING LASER RECEIVER
OPERATING
/ SAFETY
INSTRUCTIONS
ENGLISH

4
150m360° ROTARY LASER LEVEL
TB-H2-LL-M150-R1
1 Battery Compartment / Lid
2 Power ON / OFF Push Button
3 Pendulum Lock / Unlock Switch
4 Pendulum Locked Indicator
5 Battery Charge Level Indicator
6 800 RPM LED Indicator
7 500 RPM LED Indicator
8 200 RPM LED Indicator
9 Dove Tail Slide Mount
10 5/8"-11 Tripod Mount
11 1/4"-20 Tripod Mount
12 “X” Axis Indicator
13 “Y” Axis Indicator
14 Laser Beam Outlet
14
5
4
3
6
7
8
1
5
0
M
3
6
0
º
R
O
T
A
R
Y
L
A
S
E
R
L
E
V
E
L
I
T
B
-
H
2
-
L
L
-
M
1
5
0
-
R
1
A
V
O
I
D
E
X
P
O
S
U
R
E
|
L
A
S
E
R
L
I
G
H
T
I
S
E
M
I
T
T
E
D
F
R
O
M
T
H
E
S
E
A
P
E
R
T
U
R
E
S
Y
X
13
12
10
11
1
2
9

5
ROLLING LASER RECEIVER
TB-H2-LLA-30
15
21
19
16
22
23
25
17
24
18
20
27
15 Battery Compartment / Lid
16 Power ON / OFF Push Button
17 Audio Signal Indicator Button
18 Accuracy Button
19 Attachment Magnet
20 Accuracy Level Indicator
21 Brake Release Pads x 2
22 LED Screen
23 Audio Volume Level Indicator
24 Battery Charge Level Indicator
25 Audio Speaker
26 Guide Rollers x 4
27 Centering Reference Marker x 2
26

6
QUICKSET TRIPOD
TB-H2-LLA-01
®
2.4mGRADE ROD
TB-H2-LLA-20-8
28
29
30
31 0 to 62cm Subsection
32 Black - 63 to 123cm Subsection
33 Yellow - 124 to 184cm Subsection
34 White - 185 to 245cm Subsection
35 Locking Detent
36 Hook-and-Loop Strap
28 Bubble Level
29 Locking Legs
30 Rubber Caps
31
34 33
32
35
36

7
Before using this product, review and familiarise
yourself with the contents of this manual.
The specifications and general appearance
of the instrument are subject to change without
notice and without obligation by ToughBuilt®
Industries, Inc. and may differ from those
appearing in this manual.
TABLE OF CONTENTS
1. SAFETY AND PRECAUTIONS 10
2. PRODUCT INFORMATION
Intended Use 16
Features and Benefits 16
What is Included 17
Specifications 18
3. 150m360° ROTARY LASER LEVEL
Installing the Batteries 20
Powering ON 21
Powering OFF 22
Important Tips 23
Troubleshooting 24
4. ROLLING LASER RECEIVER
Installing the Batteries 25
Powering ON 26
Powering OFF 26
Important Tips 28
Troubleshooting 29
5. QUICKSET®TRIPOD 30
Assembly 31
6. 2.4mGRADE ROD 32
Assembly 34
7. ACCURACY CHECK 36
8. MAINTENANCE 39
9. END OF PRODUCT LIFE 39
10. GUARANTEE AND REGISTRATION 40
Online Registration 40

8
APPLICATION EXAMPLES
Levelling Indoors
at Long Distances
In high ambient light conditions and for long
distances, it is recommended to use the laser
receiver for detection.
Applicable when marking reference points.
Levelling Outdoors
In outdoor scenarios over long distances,
it is recommended to use the laser receiver
mounted on the grade rod for laser beam detection.
Applicable when setting elevations.
Levelling Indoors
at Short Distances
In moderate light conditions and for short distances,
the laser beam position can be visually detected.
Applicable when making reference points.

9

10
Display Meaning
CAUTION Ignoring the given directions could result
in personal injury or property damage.
1. SAFETY AND PRECAUTIONS
General Safety Rules
This instrument is a sensitive, precision instrument and
should be treated as such.
WARNING! Read, understand and memorise all safety
warnings and instructions listed below. Failure to follow and
adhere to them may result in electrical shock, fire, and/or
serious injury.
SAVE ALL WARNINGS AND INSTRUCTIONS
FOR FUTURE REFERENCE
WARNING! DO NOT remove or deface warning labels.
The following label is on your laser instrument:
DO NOT direct the laser beam
at people or animals.
DO NOT stare into the laser beam
yourself.
The instrument produces Class 3R
laser radiation and complies with
21 CFR 1040.10 and 1040.11 except
for deviations pursuant to Laser
Notice No. 50, dated June 24,
2007. Serious eye injury could result.

11
Symbol Meaning
VVolts
mW Milliwatts
Laser Warning
nm Wavelength in nanometers
Class 3R Laser Product
To reduce the risk of injury,
user must read the instruction manual
Warning, Caution, Precaution
Risk of eye injury. Wear ANSI-approved
safety goggles with side shields
Laser Radiation
WARNING! DO NOT disassemble the instrument.
Any tampering with this instrument will automatically
void all warranties.
DO NOT modify the product in any way. Modifying
the laser instrument may result in hazardous laser
radiation exposure.
DO NOT stare directly into the beam or view directly with
optical instruments. DO NOT point laser beam at others.
Serious eye injury could result.
ALWAYS make sure that any bystanders in the vicinity
of use are made aware of the dangers of looking directly
into the laser instrument. If laser beam strikes your eyes,
immediately close your eyes and turn your face away.
DO NOT allow people who are unfamiliar with this
instrument to operate it.
CAUTION! Eye exposure to laser beam increases for
people who are wearing prescription glasses/lenses.
DO NOT set the laser beam at eye level.
DO NOT leave the instrument in the ON position when
unattended. ALWAYS turn OFF the instrument when it
is not in use.
DO NOT use this laser instrument for anything other
than its intended purpose.
The label on your instrument may include the following symbols:

12
DO NOT use any optical instruments such as, but not
limited to, telescopes or transits to view the laser beam.
Serious eye injury could result.
DO NOT operate the laser instrument around children
nor allow children to operate the laser instrument.
ALWAYS position the laser instrument securely.
Damage to the laser instrument and/or serious injury to
the user could result if the laser instrument falls.
ALWAYS use accessories specifically outlined in this
manual. Use of accessories that have been designed for
use with other laser instruments could result in serious
injury, or property damage.
Battery Safety Instructions
WARNING! Batteries can explode or leak and cause burns
if installed backwards, disassembled, charged, or exposed to
water, fire or high temperature. To reduce this risk:
ALWAYS follow the instructions and warnings on the
battery label and packaging.
Keep batteries out of reach of children.
ONLY use AA alkaline batteries.
ALWAYS insert batteries correctly with regard to polarity
(+ and –), marked on the battery and the equipment.
DO NOT charge alkaline batteries.
ALWAYS replace all batteries at the same time, with same
make, brand and charge level.
DO NOT short battery terminal.
ALWAYS check battery posts in the battery compartment
for possible corrosion. Clean the posts before use.
DO NOT use batteries with corroded terminals.
REMOVE batteries if the instrument will not be used for
an extended period. In storage, batteries may corrode
and self-discharge.
DO NOT store or use in locations where the temperature
may reach or exceed 40.5°C (105°F), store in a cool, dry
place.
DO NOT mix old and new batteries.
DO NOT mix rechargeable and non-rechargeable
batteries.
DO NOT incinerate or dismantle batteries.
DO NOT mix battery chemistries.

13
Under abusive conditions, liquid may be ejected from
the battery, avoid contact. If contact accidentally
occurs, flush with water. If liquid contacts eyes,
additionally seek medical help. Liquid ejected from the
battery may cause irritation or burns.
WARNING! Recycle used batteries and dispose of
equipment properly. Contact your local waste management
for more information.
Work Area Safety
DO NOT operate while children are present.
AVOID dangerous environments.
Keep pets away from job site.
AVOID extended exposure to damp or wet locations.
DO NOT use in the presence of explosive atmospheres
(gaseous fumes, dust or flammable materials).
Keep work area clean and well lit. Cluttered or dark
areas invite accidents.
ALWAYS alert by-standers that laser is in use.
Make sure no one stares into the laser beam.
Personal Safety
STAY ALERT, watch what you are doing and use common
sense when operating the instrument.
Secure loose clothing, jewelry and long hair.
DO NOT use the instrument while you are tired.
A moment of inattention while operating an instrument
may result in serious personal injury or incorrect
measurement results.
DO NOT allow people who are unfamiliar with
the procedures of this instrument to operate it.
Maintain proper balance and footing when using the
instrument.
DO NOT operate instruments and machinery when under
the influence of alcohol, medication, or drugs.
Use safety equipment. ALWAYS wear ANSI-APPROVED
safety goggles. Safety equipment such as dust mask,
non-skid safety shoes, hard hat, or hearing protection
used for appropriate conditions will reduce the risk of
personal injuries.

14
Magnets
Keep the instruments, target card, and grade rod
away from cardiac pacemakers. The magnets of the
instrument and laser target plate generate a field that can
impair the function of cardiac pacemakers.
Keep the instruments, target card and magnetic
rotating mounts away from magnetic data medium
and magnetically sensitive equipment. The effect of
the magnets of the instrument, receiver, target plate, and
grade rod can lead to irreversible data loss.
Instrument Use and Care
DO NOT use the laser if the Pendulum Lock/Unlock
Switch 3 does not turn the laser on or off. Any
instrument that cannot be controlled with the switch is
dangerous and must be repaired.
Follow instructions in the Maintenance section of this
manual. Use of unauthorized parts or failure to follow
Maintenance instructions may create a risk of injury.
FCC Cautions
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference
by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment
and receiver.
Consult the dealer or an experienced radio/TV technician
for help.

15
Specific Safety Rules
for Laser Line Detector
DO NOT dispose of instrument nor batteries together
with household waste material! Instrument and batteries
that have reached the end of their life must be collected
separately and returned to an environmentally compatible
recycling facility.
Ensure instrument magnets are securely mounted to a
metal surface. The magnet holding strength decreases
when it is attached to a thin or slippery metal plate
which may cause the instrument to fall.
Maintain labels and nameplates. These carry important
information. If unreadable, contact Customer Service
for a free replacement.
This instrument conforms to the most stringent
requirements of the relevant Electromagnetic
Compatibility (EMC) Standards and Regulations.
Yet, the possibility of causing interference in other
devices cannot be totally excluded.
IMPORTANT! ToughBuilt®does not recommend
nor encourage the use of third-party accessories on
this instrument.

16
2. PRODUCT INFORMATION
Intended Use
This instrument is a self-leveling rotating laser that projects
a rotating laser beam. The laser is designed to transfer horizontal
level positions. It can be used to determine ground levelling
and height marks. The laser level is suitable for indoor and
outdoor use.
Features and Benefits
Rotary Laser Level - TB-H2-LL-M150-R1
Powerful Class 3R Green Laser Beam is more visible in broad
daylight and direct sunlight
IP-54 Dust and Moisture Ingress Rating
Multiple Mounting Options: Dovetail, 1/4"-20 and 5/8"-11
Laser Receiver - TB-H2-LLA-30
Designed for easy one-handed operation
Can detect the laser beam in bright conditions up to 150m
QuickSet Tripod - TB-H2-LLA-01
Bubble Level for quick tripod levelling
QuickSet®Dovetail Mount instantly locks the laser onto
the tripod
2.4m Grade Rod - TB-H2-LLA-20-8
2.4m Aluminium Grade Rod has a uniform width from top to
bottom, so the Rolling Laser Receiver effortlessly glides up
and down the grade rod for fast, accurate readings
Easy-to-read Measurement Graduation on both sides
of the grade rod
Carrying Case
Protective Carrying Case for transporting and storage
®

17
What is Included
A 1 x 150m 360° Rotary Laser Level - TB-H2-LL-M150-R1
B 1 x Rolling Laser Receiver - TB-H2-LLA-30
C 1 x QuickSet®Tripod - TB-H2-LLA-01
D 1 x 2.4m Grade Rod - TB-H2-LLA-20-8
E 7 x AA alkaline batteries
F 1 x Instructional manual (not shown)
G 1 x Carrying case
A B
C D
E G

18
Specifications
150m 360° Rotary Laser Level TB-H2S4-LL-M150-R1
Beam Projection Horizontal Rotation
Light Sources Pendulum diode with laser wave-
length of 500-540nm
Laser Safety Class Class 3R, <5mW
Levelling Accuracy ± 9mm at 30m / ± 3/8" at 100'
Self-Levelling Range ± 3.5°
Range with Detector (Diameter) Up to 2.4m / 786' *
Laser Beam Color Green
Debris Protection IP54
Operating Temperature -10 to 50°C / 14 to 122°F
Storage Temperature -20 to 70°C / -4 to 158°F
Power Source 4 x AA 1.5V alkaline batteries
(included)
Operating Time 11 hours
Mounting Receptacle
a) Dove Tail slide mount with lock
b) 1/4"-20 thread
c) 5/8"-11 thread
Dimensions (W x H) 210mm x 163mm
8-9/32" x 6-7/16"
Weight (without batteries) 1.57 kg / 3.47 lb
*Range achieved only with ToughBuilt®Receiver, model TB-H2-LLA-30.

19
Rolling Laser
Receiver TB-H2-LLA-30
Detection Range
(Diameter) 2.4m / 786'
Detection Accuracy
Fine setting:
± 1.5mm (<50m)
± 0.06" (<164')
Coarse setting:
± 2.5mm (≥50m)
± 0.098" (≥164')
Audio Indicators Slow beeps / fast
beeps / monotone
Auto Power-OFF 20 min ± 1 min
Power Source 3 x AA alkaline
batteries
Battery Run Time
(continuous usage) 45 hours (approx.)
Target Indicator Visual and Audio
Debris Protection Waterproof Design
Dimensions
(H x W x D)
176.2 x 91 x 50mm
(6-15/16" x 3-9/16"
x 1-31/32")
Weight
(without batteries) 775 g / 27.33 oz
QuickSet®
Tripod TB-H2-LLA-01
Storage
Dimensions
( L x W x H)
806 x 156 x 156mm
(31-3/4" x 6-1/8"
x 6-1/8")
Net Weight 2.18 kg / 4.8 lb
Instrument Mounts QuickSet®
Base Rotation 360º
2.4m Grade Rod TB-H2-LLA-20-8
Length 2.43m / 8 feet
Measurement
Accuracy
millimeter
increments
Material Aluminium
Type
Modular (4 sub-
sections with push-
type lock detents)
Storage
Stacked and secured by
built-in magnets and
a hook-and loop strap

20
3. 150m360° ROTARY LASER LEVEL
Installing the Batteries
Before installing or replacing batteries:
CAUTION! ALWAYS make sure to turn the power OFF.
Ensure the Pendulum Lock/Unlock Switch 3 is in the
LOCKED position.
CAUTION! Check the batteries thoroughly to make sure
they are not damaged, and their terminals do not show signs
of corrosion.
Unscrew the Battery Compartment Lid screw 1
counterclockwise and remove the lid.
Insert 4 AA alkaline batteries observing the polarity specified
on the inside of the battery compartment.
Close the battery compartment by replacing the lid and
tightening the screw. When properly tightened, the Lid 1
will be flush with underside of the instrument. DO NOT OVER
TIGHTEN THE SCREW.
CAUTION! When the Battery Indicator LED 5 starts
flashing, it is time to replace the batteries.
WARNING! NEVER PLACE THE INSTRUMENT UPSIDE
DOWN ON THE LASER BEAM OUTLET COVER.
Wrong orientation Lay the instrument on its side
as shown here.