Toyomi MC 5001 User manual

●If the supply cord is damaged, it must be replaced by a special cord or
assembly available from the manufacturer or its service agent.
●WARNING: This appliance is not intended for use by persons (including
children) with reduce physical, sensory or mental capabilities, or lack of
experience and knowledge, unless they have been given supervision or
instruction concerning use of the appliance by a person responsible for
their safety.
SERVICE & IMPORTANT NOTICE

1. NAME OF PARTS:
2. IMPORTANT SAFEGUARDS.
When using electrical appliances, basic safety precautions should
always be followed, including the following.
A. Read all instructions.
B. Do not touch hot surfaces. Use handles or knobs.
C. To protect against fire, electric shock and injury to persons do not
immerse cord, plugs, or heating base in water or other liquid.
D. Close supervision is necessary, when any appliance is used by or
near children.
E. Unplug from outlet when not in use and before cleaning. Allow to
cool before putting on or taking off parts, and before cleaning the
appliance.
F . Do not operate any appliance with a damaged cord or plug or after
he appliance malfunctions, or has been damaged in any manner.
Return appliance to the authorized service facility for examination,
repair or adjustment.
G. The use of accessory attachment which aren’t recommended by the
appliance manufacturer may result in fire, electric shock or injury
to persons.
H. Do not use outdoors .
I. Do not touch hot surface, or let cord hang over edge of counter or
table.
J. Do not place on or near a hot gas or electric burner, or in a heated
oven.
K. Always attach plug to appliance first, then plug cord into the wall
outlet. To disconnect, remove plug from wall outlet.
L. Do not use appliance for other than intended use.
1 2
GLASS COVER
POT
HEATING BASE
TEMPERATURE
CONTROLLER
SWITCH
TEMPERATURE
CONTROLLER
PLUG
HANDLES
LID KNOB
C. The combination structure allows the hot pot be separated from the
heating base freely for easy cleaning and operation.
C. Plug the temperature controller into the socket of heating base. Must
fully insert the temperature controller into the socket. Plug the power
plug into the power socket, the power indicator light is on.
4. OPERATION INSTRUCTIONS:
A. It combines the advantage of Chinese cuisine culture with western
cuisine culture in the aspects of design and modeling.
D. Adjust the temperature controller switch, when the power indicator
lights on, that means it is working.
B. Place the pot with soup (water) levelly on the heating base, and turn it
to ensure its bottom meets well to the heater.
3.FEATURES:
B. Provided with temperature controller, you can adjust the temperature
as you need in cooking.
A. Before each operation, check if there are any articles on the surface of
the heating board, remove it if there is any.