TP-Link TL-POE10R User manual

Installation Guide
PoE InjectorPower Socket Ethernet Device
(switch, router, etc.)
PoE Injector
LAN IN PWR DC 48V
PoE Injector Only The PoE Injector supplies steady power and data connectivity to a powered device such as PoE IP Camera, PoE
AP and PoE IP Phone through an Ethernet cable.
IP Camera AP IP Phone
Powered Device (PD)
Note:
Set the required voltage
of the non-PoE device
before cable connection.
12V 9V 5V
PoE Splitter
LAN OUT PWR DC OUT
PoE Splitter
Non-PoE Device
(suggested power:<12 W)
PoE/PoE+ Switch
PoE Splitter Only The PoE Splitter can be used with a PoE/PoE+ switch to deliver direct current (DC) power and data to a Non-PoE
device.
PoE Injector PoE SplitterPower Socket
Ethernet Device
(switch, router, etc.)
Note:
Set the required voltage
of the non-PoE device
before cable connection.
12V 9V 5V
PoE Injector
LAN IN PWR DC 48V LAN OUT PWR DC OUT
PoE Splitter
Non-PoE Device
(suggested power:<12 W)
PoE Injector & Splitter The PoE injector and PoE splitter can be used as a kit to supply power and transmit data to a Non-PoE
device.
Some models featured in this guide may be unavailable in your country or region. For local sales information, visit https://www.tp-link.com.
For technical support and other information, please visit
https://www.tp-link.com/support, or simply scan the QR code.
If you have any suggestions or needs on the product guides, welcome
to email [e-mail].
To ask questions, find answers, and communicate with TP-Link users or
engineers, please visit https://community.tp-link.com to join TP-Link
Community.
© 2022 TP-Link 7106509553 REV5.2.0
PoE Injector and PoE Splitter
For simplicity, we will take TL-POE150S and TL-POE10R for example throughout the Guide, other models may dier in appearance.

PoE Injector: PoE Splitter:
Power LED Explanation
On:Connected to PSE correctly
O:No PSE is connected
LAN OUT PWR DC OUT
PoE Splitter
PoE Injector
LAN IN PWR DC 48V
On: Supplying power normally
O: No power supply
Safety Information
Keep the device away from water, re, humidity or hot environments.
Do not attempt to disassemble, repair, or modify the device. If you need
service, please contact us.
Do not use any other chargers than those recommended.
Do not use damaged charger or USB cable to charge the device.
Adapter shall be installed near the equipment and shall be easily accessible.
Use only power supplies which are provided by manufacturer and in the
original packing of this product. If you have any questions, please don’t
hesitate to contact us.
Please read and follow the above safety information when operating the device.
We cannot guarantee that no accidents or damage will occur due to improper
use of the device. Please use this product with care and operate at your own
risk.
A: Yes. All RJ45 ports of the PoE injector support 10/100/1000 Mbps
auto-negotiation.
Q1. Can the PoE injector supply power to a PoE device which
doesn’t have a gigabit PoE port?
A1: Ensure the PD is PoE-compliant and its connecting port supports the PoE
function.
A2: Ensure the power consumption of the PD doesn’t exceed 15.4 W,
otherwise the overload protection of the PoE injector will be activated. The
quality and length of the Ethernet cable may inuence the reception of the
power supply.
Q2. What can I do if my PoE injector doesn’t supply power to
the powered device or the supplied power is unstable?
FAQ
Q3. Must I use the PoE injector together with the PoE splitter?
A: No. The PoE injector can supply power to all PDs support PoE function. The
PoE splitter is used with a PoE switch or the PoE injector to supply power to
a non-PoE device.
A1: Ensure the power cord is connected the PoE injector with power source
properly.
A2: Ensure the power consumption of the PD doesn’t exceed 15.4 W,
otherwise the PoE injector will activate the overload protection and the
power will be cut o.
Q4. The Power LED of PoE injector is not lit.
Operating Temperature 0˚C to 40˚C (32˚F to 104˚F)
Storage Temperature -40˚C to 70˚C (-40˚F to 158˚F)
Storage Humidity 5% to 90% non-condensing
Operating Humidity 10% to 90% non-condensing
Environmental and Physical Specifications
Ports
Specications
IEEE 802.3i, IEEE802.3u, IEEE 802.3ab, IEEE 802.3af
Standards
PWR
UTP/STP of Cat. 5 or above (based on the standards that the
connected devices comply with)
LED
Cable Type
General Specifications
TL-POE10R:
10/100/1000 Mbps Auto-Negotiation RJ45 POWER+DATA
IN Port
10/100/1000 Mbps Auto-Negotiation RJ45 LAN OUT Port
5 V/9 V/12 V DC OUT Power Output Port
TL-POE150S:
10/100/1000 Mbps Auto-Negotiation RJ45 LAN IN Port
10/100/1000 Mbps Auto-Negotiation RJ45 POWER+DATA
OUT Port
DC 48 V Power Input Port
EU Declaration of Conformity
TP-Link hereby declares that the device is in compliance with the essential
requirements and other relevant provisions of directives 2014/30/EU,
2014/35/EU, 2009/125/EC, 2011/65/EU and (EU)2015/863.
The original EU declaration of conformity may be found at
https://www.tp-link.com/en/ce.
UK Declaration of Conformity
TP-Link hereby declares that the device is in compliance with the essential
requirements and other relevant provisions of the Electromagnetic Compatibility
Regulations 2016 and Electrical Equipment (Safety) Regulations 2016.
The original UK Declaration of Conformity may be found at
https://www.tp-link.com/support/ukca
Продукт сертифіковано згідно с правилами системи УкрСЕПРО на
відповідність вимогам нормативних документів та вимогам, що передбачені
чинними законодавчими актами України.