TP-Link Hexagon P50 User manual

Quick Installation Guide
Safety Information
� Keep the device away from water, re, humidity or hot environments.
• Do not attempt to disassemble, repair, or modify the device. If you need service, please contact us.
• Do not use the device where wireless devices are not allowed.
• Do not use damaged charger or USB cable to charge the device.
• Do not use any other chargers than those recommended.
• Adapter shall be installed near the equipment and shall be easily accessible.
Please read and follow the above safety information when operating the device. We cannot guarantee
that no accidents or damage will occur due to improper use of device. Please use this product with
care and operate at your own risk.
EU Declaration of Conformity
TP-Link hereby declares that the device is in compliance with the essential requirements and other
relevant provisions of directives 2014/53/EU, 2009/125/EC, 2011 /65/EU and (EU) 2015/863.
The original EU declaration of conformity may be found at https://www.tp-link.com/en/support/ce/
UK Declaration of Conformity
TP-Link hereby declares that the device is in compliance with the essential requirements and other
relevant provisions of the Radio Equipment Regulations 2017.
The original UK declaration of conformity may be found at https://www.tp-link.com/support/ukca/
©2022 TP-Link 7109505719 REV1.0.0
AX3000 Whole Home Mesh Wi-Fi AP
Hexagon P50

LED Status
LED Device Status
Solid White
Pulse White
Flash White
Pulse Yellow
Flash Yellow
Solid Red
Pulse Red
Flash Red
Solid Blue
Device is set up and working well.
Device is optimizing network or renaming.
Device is during WPS.
Device is booting up.
Device is resetting.
Device is disconnected from internet.
Device is trying to connect to internet.
Device has an issue.
Device is disconnected from cloud.
Status LED
Connect the Hardware Getting Started
1Connect the power adapter to the Hexagon
P50.
2Connect the WAN/LAN port of the Hexagon
P50 to your modem/router’s Ethernet port via
an Ethernet cable.
1Download and install the HomePass app for
iOS or Android devices.
2
3
Register your HomePass account.
Power on and connect your Hexagon P50 to
the Internet. Click "Other setup options···" to
scan the QR code on the product label or
enter its SN code. Add more mesh pods later
for more coverage.
The Whole Home Mesh Wi-Fi AP Hexagon P50 is
designed to create a mesh wireless network
throughout your home.
You can easily set up and manage your network
through the HomePass® app. Search for
HomePass on the Apple app Store or Google Play,
or simply scan the QR code below.
© 2022 Plume Design, Inc. All rights reserved. Plume and HomePass are trademarks or registered trademarks of Plume Design, Inc. Other company
and product names are used for informational purposes only and may be trademarks of their respective owners.
POWER WAN/LAN LAN1 LAN2 RESET
1
2
Modem/Router
Hexagon P50
Internet
Power Adapter
Scan for
HomePass
HomePass
by Plume®
or
Hexagon P50 has an LED light that
changes color according to its status.
See the explanation below.