TP-Link TL-WR841N Instruction Manual

Connection Guide
TL-WR841N to May’s Hotspot Service fixed wireless service.
1
Step 1
Choose your connection type (Wired or Wireless)
Step 1a: If Wireless, connect to your TP-Link wireless network. Find the wireless network (named
TP-LINK_xxxxxx by default which is printed on the label of the router) from the Wi-Fi list on your
device and connect it with the wireless password (default password is printed on the router's label
as well).
Step 1b: If Wired, connect your Ethernet cable to one of the LAN ports on the back of your TP-Link
router.

Connection Guide
TL-WR841N to May’s Hotspot Service fixed wireless service.
2
Step 2
Open a web browser (i.e Safari, Google Chrome or Internet Explorer). At the top of the window in
the address bar, type in http://tplinkwifi.net enter username and password (default admin for both)
then Click Login.

Connection Guide
TL-WR841N to May’s Hotspot Service fixed wireless service.
3
Step 3
Configure WAN Connection Type
On the router’s management page, click Network > WAN on the left of the web page:
Change the WAN Connection Type to PPPoE.
Step 4
Enter your PPPoE username and password which are provided by May’s Hotspot.
Example: [e-mail]
Step 5
Click Save to save your settings. The router will connect to the Internet after a while.

Connection Guide
TL-WR841N to May’s Hotspot Service fixed wireless service.
4
Step 6
Wait for a few minutes and check that the status led changes to green from orange (similar as
below). That means the connection between the Router and the Modem has been established.