TP-Link Archer T6E User manual

Quick
Installation Guide
AC1300 Wireless Dual Band PCI Express Adapter
MODEL NO. Archer T6E
Option 2: Via Windows Wireless Utility
7106505268 REV1.0.0 For more information, please visit our website: http://www.tp-link.com
You can also download the driver and utility at www.tp-link.com
A: Insert the CD and run the Autorun.exe from the pop-up
Autoplay window.
Note: In some operating systems, the CD screen will pop up automatically.
Otherwise, run the CD manually.
B: Select Archer T6E and click Install Driver and Utility, then follow the
InstallShield Wizard to complete the installation.
Setup Wizard
Archer T6E
Install Driver and Utility
User Guide
Browse CD EXIT
Install Driver and Utility
2
Option 1: Via TP-LINK Utility
Select your preferred wireless network from the pop-up utility window
and click Connect. The symbol indicates a successful connection.
With the TP-LINK Utility closed, you can use the Windows built-in
Wireless Utility to join a wireless network.
Status WPS Network Profile Advanced
Network Name(SSID)
Channel
Signal
Security
149 (5G)
5 (2.4G)
9 (2.4G)
None
WPA/WPA2-Personal
None
34567_TEST
abcdef_0903
AAAAAA
6 (2.4G)TP-LINK_A
Connect automatically
WPA/WPA2-Personal
Connect
34567_TEST
Network Na
TP-LINK_A
Join a Wireless Network
3
©2015 TP-LINK
Connect to a Computer
1
Insert the adapter into your computer by following these steps:
1.Turn off your computer, unplug the power cord and other connected
peripheral devices to your computer.
2.Remove the case panel. Locate an available PCI-E slot and remove its
slot cover.
3.Carefully insert the adapter into the PCI-E slot and secure it with the
retaining screw.
5.Reconnect the power cord and turn on your computer.
4.Replace the case panel.
PCI-E slot
Note: In Windows XP, a Found New Hardware Wizard window will appear when the adapter is detected. Please click Cancel.