TP-Link Deco XE75 Pro User manual

Deco XE75 Pro
Superior Mesh Wi-Fi, Everywhere
User Guide
AXE5400 Tri-Band Mesh
Wi-Fi 6E System
1910013182 REV1.0.0 © 2022 TP-Link

Contents
About This Guide ···················································· 1
Appearance ······························································· 2
Set Up Your Deco ··················································· 3
Dashboard·································································· 6
Add More Decos····················································· 7
Check Deco Status ··············································· 8
Set Main Deco························································10
Remove/Reboot Deco ·······································11
Manage Connected Devices ·························12
Sort Devices By Locations······························16
Create a New Network·······································17
Change Network Owner ···································19
Delete a Network ··················································20
Add Smart Devices··············································21
Shortcut·····································································22
Automation·······························································24
HomeShield ·····························································28
Wi-Fi Settings··························································29
Guest Network ·······················································31
Blacklist ······································································32
Upgrade Your Deco·············································33
Advanced Features ·············································34
WPS··············································································39
Managers ··································································40
Control Your Deco with Alexa·························42
Troubleshooting ····················································43
Authentication························································44

1
About This Guide
This guide provides a brief introduction to Whole Home Deco Mesh Wi-Fi 6 System and the Deco app, as well as regulatory information.
Features available in Deco may vary by model and software version. Deco availability may also vary by region or ISP. All images, steps, and descriptions
in this guide are only examples and may not reect your actual Deco experience.
Conventions
In this guide, the following conventions are used:
Convention Description
Deco Stands for Deco Whole Home Mesh Wi-Fi System/
Unit.
Underline Hyperlinks are in teal and underlined. You can click to
redirect to a website or a specic section.
Teal
Key information appears in teal, including
management page text such as menus, items,
buttons and so on.
Note: Ignoring this type of note might result in a malfunction
or damage to the device.
Tips: Indicates important information that helps you make
better use of your device.
More Info
• Specic product information can be found on the product page at
https://www.tp-link.com.
• A Technical Community is provided for you to discuss our products
at https://community.tp-link.com.
• Our Technical Support contact information can be found at the
Help center of the Deco app and the Contact Technical Support
page at https://www.tp-link.com/support.
Speed/Coverage/Device Quantity Disclaimer
Maximum wireless signal rates are the physical rates derived from IEEE
Standard 802.11 specications. Actual wireless data throughput and
wireless coverage, and quantity of connected devices are not guaranteed
and will vary as a result of network conditions, client limitations, and
environmental factors, including building materials, obstacles, volume and
density of trac, and client location.
MU-MIMO Disclaimer
Use of MU-MIMO requires clients to also support MU-MIMO.
IoT Compatibility Disclaimer
IoT compatibility refers only to smart devices that can be controlled via the
Deco app. Other wireless devices can still connect to Deco for normal Wi-Fi
use.
Seamless Roaming Disclaimer
Clients need to support 802.11k/v/r and may require additional set up.
Performance may vary depending on the client device.
HomeShield Disclaimer
HomeShield includes the Free Basic Plan. Fees apply for the Pro Plan. Visit
tp-link.com/homeshield for more information.

2
Appearance
Each Deco has an LED that changes color according to its status, three RJ-45 Ethernet ports, a power slot, and a Reset button.
See the explanation below:
Tip: The product label can be found at the bottom of the product.
Pulse Yellow:
Deco is resetting.
Solid Yellow:
Deco is starting up.
Pulse Blue:
Deco is ready for setup.
Solid Blue:
Deco is setting up.
Pulse Green:
Deco is upgrading rmware.
Solid Green:
Deco is all set up and connected.
Pulse Red:
The satellite Deco is disconnected
from the main Deco.
Solid Red:
Deco has an issue. Reset Button:
Press for 1 second and release to reset Deco to factory
default settings. The light changing from pulsing yellow to
solid yellow indicates a successful reset.
1 Gigabit & 2.5 Gigabit Ethernet Port:
For connecting Deco to your modem, the Ethernet outlet,
or for other internet services.
Power Slot:
For connecting Deco to the power socket via the provided
power adapter.

3
Set Up Your Deco
The intuitive Deco app guides you through an easy setup process that gets each unit up and all your devices connected.
Follow the steps below to set up your Whole Home Deco Mesh Wi-Fi 6E System.
1. Download and install the Deco app
Scan the QR code below or go to Google
Play or the App Store to download the Deco
app. Install the app on your Android or iOS
smartphone or tablet.
or
2. Log in or sign up with TP-Link ID
Open the app. Use your TP-Link ID to log in. If
you don’t have a TP-Link ID, sign up rst.
Note: If you forgot your login password, tap Forgot Password?.
The Deco app will guide you through the rest.
3. Identify your Deco
Choose your Deco model.

4
4. Plug in and power on Deco
Power o your modem. Connect your Deco to
the modem and power them both on.
If you don't have a modem, connect the
Ethernet outlet directly to your Deco.
5. Select a location
Select a location for this Deco. If its location
is not listed, you can create a new one by
choosing Custom. This will be the name of
your Deco.
6. Set up internet connection
Select the internet connection type and enter
the information. If you are not sure, contact
your internet service provider.

5
8. Connect to your Wi-Fi network
Connect your phone/tablet to the Deco's Wi-Fi.
7. Create your Wi-Fi network
Set a network name and a password. These
will be the name and password you use to
connect your devices to Wi-Fi.
9. Setup complete
Your Deco network is now up. Connect
all devices to the Deco network. You can
also Add More Decos to expand the Wi-Fi
coverage.

6
Dashboard
After you successfully set up your Deco network, you will see the dashboard of the Deco app. Here you can get an overview of the network status,
create shortcut and automation, customize your home network with enhanced security using a kit of features built to TP-Link HomeShield and set up
various advanced features.
Tap to get an overview of the
network status.
Tap to create shortcut or
automation.
Tap to enter the HomeShield
page for enhanced security.
Tap for more features.

7
Add More Decos
After creating a Deco network, you can add more Decos to the network to expand the Wi-Fi coverage and manage them easily on your Deco app.
1. In Overview, tap +> DECOS.
2. Select the Deco model you want to add, and
follow app instructions to complete the setup.

8
Check Deco Status
In Overview, you can check the working status (online/offline) of all the Decos, check the details (speed/Deco's IP address & MAC address/connected
clients) of each Deco, change the Deco's location/name, and more.
Tap to check all Decos' status. Tap a Deco unit to check more details. Check download/upload speed of the Deco.

9
Check the clients connected to the Deco.
Enable the Mesh feature, then the client can seamlessly switch to
the Deco that provides the fastest speed as you move around.
Change or customize the location/name of the Deco.

10
Set Main Deco
After setup, you can replace the main Deco with any satellite Deco without resetting or reconfiguring the whole network.
Follow the steps below to complete the setup process.
Note: The main Deco links all the others to the internet. After the main Deco nishes switching, you need to connect the new main Deco to the modem or Ethernet outlet for internet connection. For DSL
Deco, connect it to the phone jack or DSL splitter. For 4G/5G Deco, insert a nano SIM card to it.
1. In Overview, tap . 3. Choose a satellite Deco and follow app
instructions to complete the settings.
2. Tap > Set Main Deco.

11
Remove/Reboot Deco
You can reset your Deco to factory default settings or reboot your Deco to clear cache and enhance running performance easily in the Deco app.
Follow the steps below.
Note:
Rebooting your Deco will keep the current settings on it.
Removing your Deco will reset it to factory default settings and you will need to set up your Deco again. You can also press the Reset button on the Deco for 1 second to quickly reset your Deco to factory
default settings.
1. In Overview, tap . 3. Tap to remove or reboot the Deco.
Note: If the LED light of Deco does not turn pulsing blue after tapping Remove, press the Reset
button on the Deco for 1 second to reset it.
2. Select a Deco unit.

12
Manage Connected Devices
In Overview, you can manage your connected devices easily, such as changing the device name/type/location, enabling automation, Mesh Technology
and high priority for the device, setting a profile to manage its online activities, and more.
Tap a connected device to check the details (e.g. real-time upload and
download speeds, device name/location/prole, etc.).
Change the device name as needed.

13
Enable High Priority and set the Duration time to prioritize the connection
of this device during the time, such as a family member’s laptop for one
hour during a video call.
Tap Automation to enable, disable, or edit it. If you have not set
automation yet, follow Automation to create one.

14
Tap to manage the device settings, including changing the device
name/type, viewing device detailed information (IP address, MAC
address, connected network, linked Deco, etc.), and more.
Tap Location to sort the devices by customized locations so that you can
quickly find and manage the devices.

15
Tap Belongs to to add a unique profile for the device and manage its online activities. For example, when
and for how long this device can access the internet, block inappropriate content, and pause the internet if
necessary. For more information about the feature, refer to HomeShield.
Enable Mesh Technology and then the
device can seamlessly switch to the
Deco that provides the fastest speed
as you move around.

16
Sort Devices By Locations
After adding your devices to the Deco network, you can sort them by customized locations so that it will be more convenient and ecient to manage
your devices. For example, you can add the lights and computer in your bed room to a location set as "Bed Room", so you can quickly nd and manage
these devices.
In Overview, tap + > LOCATIONS. Follow app instructions to sort your devices by location.

17
Create a New Network
In the Deco app, you can create different Deco networks with your TP-Link ID and manage them conveniently from the Deco app with one account. You
can also help family or friends manage their networks with your Deco app. Two methods are provided as below to create a new network.
Method 1. Create a new network from the Overview page
Tap > Create New Network. Then follow app instructions to complete the setup.

18
Method 2. Create a new network from the Menu page
1. Tap to open the menu. 2. Tap > CREATE NEW NETWORK.3. Follow app instructions to complete
the setup.