TP-Link M7450 Quick start guide

How to upgrade TP-Link MiFi product?
Notice:
1. Before upgrading:
Please verify the hardware version of your device for the firmware version.
Wrong firmware upgrading may damage your device and void the warranty.
How to check over the hardware version of a TP-Link device?
It’s recommended that users stop all Internet Applications on the computer.
Please unzip the firmware file you have downloaded, and use the sub-zipped file
named as XXXX_user.zip to upgrade.
Please make sure the device is fully charged.
2. During upgrading:
DO NOT upgrade the firmware through wireless connection unless there is no
LAN/Ethernet port on your TP-Link device.
DO NOT turn off the device during upgrade process.

Steps about upgrading:
Step 1 Download the latest firmware file for the Mobile Wi-Fi from our
website www.tp-link.com.
Step 2 Please connect your computer or other devices to MiFi product wirelessly or
via USB cable (about how to access the MiFi product’s Internet via USB cable,
please refer to FAQ 758), then open the web browser and enter
http://tplinkmifi.net in the address bar.
Step 3 Log into the management interface of your device. The default username and
password are both admin in lower case.
Step 4 Select Advanced > Device > Firmware Update, and the webpage will show
as below:

Step 5 Select “Update via the local server”, and click Browse.
Step 6 Select the zip file you have just downloaded from TP-LINK website. The
firmware file is usually named as XXXX_user.zip.
Step 7 Click Update. The device will reboot automatically after upgrading.

How to check the hardware version of a TP-Link device?
Log in the device, click Advanced->System Tools ->Firmware Upgrade, The
software and hardware version will be shown as the following picture.