TradeQuip 1045 User manual

Oct-18 Product Code: 1045
Made in China to TQB Brands Pty Ltd specifications
Visit us at www.tqbbrands.com.au
OWNER’S MANUAL
PRODUCT CODE: 1045
FLOOR FAN
Blade Diameter
Motor
Input Output
Air
Delivery
Motor
Speed (Max.)
Warranty
500mm
240V 50Hz 180W
142m³/min
1350rpm
12 months

Oct-18 Product Code: 1045
Made in China to TQB Brands Pty Ltd specifications Page 2
Visit us at www.tqbbrands.com.au
WARNING
IMPORTANT: READ ALL INSTRUCTIONS BEFORE USE
WARNING
The instructions and warnings contained in this manual should be read and understood before
using or operating this equipment. Do not allow anyone to use or operate this equipment until
they have read this manual and have developed a thorough understanding of how this
equipment works. Failure to observe any of the instructions contained in the manual could
result in severe personal injury to the user or bystanders, or cause damage to the equipment
and property. Keep this manual in a convenient and safe place for future reference.
Whilst every effort has been made to ensure accuracy of information contained in this manual,
the TQB Brands Pty Ltd policy of continuous improvement determines the right to make
modifications without prior warning.
CONTENT
WARNING .............................................................................................................................. 2
CONTENT ............................................................................................................................... 2
SAFETY INSTRUCTIONS ........................................................................................................... 3
ASSEMBLY, OPERATION, PREVENTITIVE MAINTENANCE .......................................................... 4
PARTS LIST WALL FAN............................................................................................................. 6
PARTS LIST STAND FAN ............................................................... Error! Bookmark not defined.
SPECIFICATIONS ......................................................................... Error! Bookmark not defined.
WARRANTY ............................................................................................................................ 7

Oct-18 Product Code: 1045
Made in China to TQB Brands Pty Ltd specifications Page 3
Visit us at www.tqbbrands.com.au
SAFETY INSTRUCTIONS
SAFETY OPERATING INSTRUCTIONS
- When servicing, use only TradeQuip identical replacement parts. Use of any other parts
will void the warranty. Ensure the Floor Fan is disconnected from power before servicing.
- Use the right product for the job. There are certain applications for which the Pedestal
Fan was designed. Do not modify the Floor Fan and do not use the Floor Fan for a purpose
for which it was not intended.
- This product is intended for indoor use only.
- Always operate the product from a power source of the same voltage, frequency and
rating as indicated on the product identification plate.
- To reduce the risk of electric shock, do not use this fan with any solid-state speed control
device.
- This appliance is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge, unless they
have been given supervision or instruction concerning use of the appliance by a person
responsible for their safety.
- Do not insert fingers or any other foreign object through the front and rear grills into the
blade.
- Close supervision is necessary when any product is used by or near children or infirm
persons. Do not allow children to use it as a toy.
- Do not operate any product with a damaged cord or plug, after the product malfunctions,
is dropped or appears damaged in any way. Return the complete product to the place of
purchase for inspection, repair, or replacement.
- To reduce the risk of electric shock, do not immerse or expose the product or flexible cord
to rain, moisture, or any liquid.
- This product should not be used in the immediate vicinity of water, such as sinks,
bathtubs, washbowls, swimming pool, etc. where the likelihood of immersion or splashing
could occur.
- Switch off and unplug from outlet when not in use, before assembling or disassembling
parts, and before cleaning. Fully assemble the fan before switching on.
- Avoid contact with moving parts. Do not insert any object through the grill when the fan
is operating.
- Do not cover the grill, or operate in close proximity to curtains, etc.
- Always disconnect the fan when moving it from one location to another.
- The use of attachments or accessories not recommended or sold by the product
distributor may cause personal or property hazards or injuries.

Oct-18 Product Code: 1045
Made in China to TQB Brands Pty Ltd specifications Page 4
Visit us at www.tqbbrands.com.au
OPERATION, PREVENTITIVE MAINTENANCE
1. FEATURES
This TradeQuip "Made for the Trade" Floor Fan is powered by a vented, steel-cased 3-
speed 240V 180W motor that delivers 142m³ per minute. High-temperature resettable
thermal auto reset and durable bearings allow operation in high temperatures. Non-
corroding aerodynamically balanced steel blades allow quiet operation. Adjust the 15° fan
head tilt adjustment and double-locking guard to direct the airflow wherever necessary.
The TradeQuip "Made for the Trade" Workshop Fans are heavily constructed industrial
duty quality fans ideal for cooling large open workshop areas in the hottest Australian
climates. Conforms to Australian Standards requirements.
2. BEFORE USE
Prior to each use conduct a visual inspection by checking for abnormal conditions, such as
cracked joins and damaged, loose, or missing parts.
Ensure that the fan is switched off from the supply mains before removing the guards.
If the supply cord is damaged, it must be replaced by the manufacturer, service agent or
similarly qualified persons in order to avoid a hazard.
3. OPERATION
Change of the wind direction:
If you want to change the direction of the air circulation, disconnect the power supply and
loosen the direction adjustment bolt to adjust the direction of the fan head to required
position and re-tighten the bolt. It is not necessary to move the base of the fan.
Adjustment of air volume
Turn the switch on the back of the fan head to control the operation of the fan and adjust
air volume, “1-2-3” speeds indicate different air volume.
4. STORAGE
This TradeQuip Floor Fan should always be stored in a dry location on a level surface.
When you stop using the fan, you should clean the fan, pack it and put it in dry places, be
careful not to damage the fan.

Oct-18 Product Code: 1045
Made in China to TQB Brands Pty Ltd specifications Page 5
Visit us at www.tqbbrands.com.au
5. MAINTENANCE
Disconnect power prior to any maintenance
Inspect the general condition of the Floor Fan checking:
- for loose hardware
- cracked, bent, or broken parts, and
- any other condition that may affect the Floor Fan safe operation
Grease Change:
After the fan is operated over 2000 hours (or at least once a year), the grease in the gear
box and bearing should be changed.
6. SERVICE & REPAIR
Any TradeQuip Workshop Fan found damaged in any way, or found to be worn or
operates abnormally should be removed from service until repaired by an authorised
service agent. Owners and / or operators should be aware that repair of this product may
require specialised equipment and knowledge. Only authorised parts, labels and decals
shall be used on this equipment. Annual inspection of the Floor Fan is recommended and
can be made by an authorised repair facility to ensure that your equipment is in optimum
condition and that the equipment has the correct decals and safety labels specified by the
manufacturer.

Oct-18 Product Code: 1045
Made in China to TQB Brands Pty Ltd specifications Page 6
Visit us at www.tqbbrands.com.au
PARTS LIST
Part #
Description
QTY
Part #
Description
QTY
1
Front Safety Grill
1
11
Flat Washer
4
2
Fan Blade
1
12
Spring Washer
4
3
Tripod
1
13
Nut
2
4
Rear Safety Grill
1
14
Switch Box
1
5
Cross Recessed Pan Screws
2
15
Cross Recessed Pan Screws
2
6
Flat Washer
2
16
Flat Washer
2
7
Spring Washer
2
17
Spring Washer
2
8
Nut
2
18
Nut
2
9
Motor
1
19
Power Cord
1
10
Cross Recessed Pan Screws
4

Oct-18 Product Code: 1045
Made in China to TQB Brands Pty Ltd specifications Page 7
Visit us at www.tqbbrands.com.au
WARRANTY
TradeQuip products have been carefully tested and inspected before shipment and are
guaranteed to be free from defective materials and workmanship for a period of 12 months
from the date of purchase except where tools are hired out when the guarantee period is
ninety days from the date of purchase.
Should this piece of equipment develop any fault, please return the complete tool to your
nearest authorised warranty repair agent or contact TQB Brands Pty Ltd Warranty team –
[e-mail].
If upon inspection it is found that the fault occurring is due to defective materials or
workmanship, repairs will be carried out free of charge. This guarantee does not apply to
normal wear and tear, nor does it cover any damage caused by misuse, careless or unsafe
handling, alterations, accident, or repairs attempted or made by any personnel other than the
authorised TQB Brands Pty Ltd repair agent.
This guarantee applies in lieu of any other guarantee expressed or implied and variations of its
terms are not authorised.
Your TQB Brands Pty Ltd guarantee is not effective unless you can produce upon request a
dated receipt or invoice to verify your proof of purchase within the 12month period.
Consumer Guarantee
Our goods come with a guarantee that cannot be excluded under the Australian Consumer
Law. You are entitled to a replacement or refund for a major failure and compensation for any
other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired
or replaced if the goods fail to be of acceptable quality and the failure does not amount to a
major failure.