General Information
Purpose of this Manual
The purpose of this manual is to allow the installer and the qualified operator to carry out all required operations in
order to ensure proper installation and maintenance of the unit, without risking any damage to people, animals
and/or objects. All activities must be carried out in compliance with local laws and regulations.
This publication has been prepared only as a support and does not constitute a binding offer to Trane. Trane has
compiled the content to the best of their knowledge. No express or implied warranty is given for the
completeness, accuracy, reliability of the content. All data and specifications in it shown are subject to change
without notice. Trane explicitly rejects any liability for any direct or indirect damage, in the broadest sense of the
term, arising from or related to the use and / or interpretation of this publication. It is strongly recommended to
sign a maintenance contract with an authorized service center to ensure an efficient and trouble-free.
All units are shipped with schematic and dimension drawing, dimensions and weights for the specific unit.
WIRING AND OVERALL DESIGN OF SPECIFIC TO BE CONSIDERED AS AN INTEGRAL PART OF THIS
MANUAL. In case of discrepancy between this manual and the two documents cited prevail as shown on the
wiring diagram and outline drawing.
Receiving the unit
On receiving the unit, check that there is no obvious damage or missing components. If this is so, an immediate
complaint must be made to the carrier for damage or for not-delivery. The Receiving Card to be found inside the
unit electrical panel must be filled in. Photographic evidence must be provided for macroscopic damage and is
helpful in ascertaining responsibility.. The card must be sent to Trane within 8 days of receiving the goods: if not
sent back, or delayed, the complaint will not be accepted. In no case must the damage be repaired before the unit
has been inspected by the representative of the transportation company.
Unit Identification
The unit is identifiable through:
•Label
It contains the unit description (model and size), serial number, production year, electrical data, main technical
data, logo and also manufacturer address. In case of loss please request for a duplicate from the after sales
service. Tampering and/or re-handling the label do not allow the identification of the product, and may complicate
any installation and maintenance operation.
•Serial number
The serial number identifies the unit unambiguously and allows identification of specific characteristics of the unit
and its components. Without this serial number it is not possible to identify the specific spare parts of the unit.
Operating range
The operating ranges are indicated on the machine plate placed on the unit.
Warranty
A. Warranty is based on the general terms and conditions of the manufacturer. The warranty is void if the equip-
ment is repaired or modified without the written approval of the manufacturer, if the operating limits are exceeded
or if the control system or the electrical wiring is modified. Damage due to misuse, lack of maintenance or failure
to comply with the manufacturer’s instructions or recommendations is not covered by the warranty obligation. If
the user does not conform to the rules of this manual, it may entail cancellation of warranty and liabilities by the
manufacturer.
B. Warranty is twelve (12) months as from the date of first start up at installation place or eighteen (18) months
after delivery at the project or other delivery location indicated by the customer. The date the unit is operated for
the first time means the date reported in the “1st start up form” contained into the “unit log book”. This form should
be filled in and sent, within 8 days from the start up, to Trane.
C. The warranty is valid if all the installation and start-up instructions have been adhered to (both those which
may have come from Trane and those coming from current practice), if the “1st start up form” has been filled in
and sent to the Trane after sales department.
D. The warranty is subject to any faults or defects being reported within eight days from their discovery. The war-
ranty will only be applied if and when the purchaser suspends use of the equipment as soon as a defect has been
found.
E. The warranty is valid if the first start-up of the unit is carried out by Trane authorized service personnel.
