Transcend DrivePro 110 User manual

User’s Manual
Dashcam
DrivePro™ 110
2020/05
(Version 1.3)

Table of Contents
1. System Requirements...................................................................... 2
2. Package Contents............................................................................ 2
3. Getting Started................................................................................. 4
3-1 Overview............................................................................................................................4
3-2 Inserting a microSD Memory Card.....................................................................................4
3-3 Mounting the DrivePro........................................................................................................6
3-4 Connecting to Power..........................................................................................................7
3-5 Function Buttons ................................................................................................................9
3-6 LED Indicator Reference Chart..........................................................................................9
3-7 Setting the Date and Time..................................................................................................9
4. Recording Videos........................................................................... 11
4-1 Recording Screen.............................................................................................................11
4-2 Emergency Recording......................................................................................................11
5. Browsing Photos and Playing Videos ............................................ 13
5-1 Playing Videos / Browsing Photos....................................................................................13
5-2 Deleting Videos................................................................................................................14
5-3 Protecting Videos.............................................................................................................14
6. Settings .......................................................................................... 15
7. DrivePro Toolbox Software ............................................................ 19
8. Transferring Files to a Computer ................................................... 20
9. Troubleshooting ............................................................................. 23
10. Safety Cautions.............................................................................. 24
11. Specifications................................................................................. 25
12. Recycling and Environmental Protection ....................................... 26
13. Federal Communications Commission (FCC) Statement .............. 27
14. Two-year Limited Warranty............................................................ 28
15. GNU General Public License (GPL) Disclosure............................. 29
16. End-User License Agreement (EULA)........................................... 29
17. Eurasian Conformity Mark (EAC)................................................... 31

2
1. System Requirements
System requirements for connecting the DrivePro to a desktop or a laptop with a working USB port:
Windows®7
Windows®8
Windows®10
Mac® OS X 10.8.2 or later
Linux® Kernel 2.6.38 or later
System requirements for using the DrivePro Toolbox:
Windows®7
Windows®8
Windows®8.1
Windows®10
Mac®OS 10.11 or later
2. Package Contents
The DrivePro 110 dashcam package includes the following items:
A DrivePro 110 Dashcam
An Adhesive Mount or a Suction Mount
A Car Adapter

3
A Transcend microSD Memory Card
A Quick Start Guide
AWarranty Card

4
3. Getting Started
3-1 Overview
3-2 Inserting a microSD Memory Card
You must insert a microSD memory card into the DrivePro before you can start recording. Please
use a microSD memory card with 8GB, 16GB, 32GB, 64GB or 128GB capacity (Class 10 or
above).
1. Insert a microSD memory card into the card slot on the left-hand side of the DrivePro.
Note: Always format a new memory card in the DrivePro before using it for the first time. To
format a new memory card, press the Settings button during recording, and select Format
Card.
Format your memory card on a regular basis. For the best recording stability, you are
encouraged to format the microSD card regularly. DrivePro will send you a notification every
three months as a reminder. Upon receipt, press to begin formatting immediately;
press to resume without taking actions. Notice: Formatting will erase all data on
the memory card.
WARNING: DrivePro 110 can only support FAT32 and exFAT file format, but not
NTFS.
LED Indicator
2.4”LCD Display
Emergency
Button
Lens
Bracket
Socket
Memory Card
Socket
USB Connector
Speaker
Microphone
Function
Buttons
Reset Button

5
2. To remove, push to eject the memory card out of the slot.
WARNING: Do not remove the memory card during shutdown to avoid damages
to the memory card and loss of recorded videos
The following table shows approximate recording time according to capacity and resolution
(for reference only):
DrivePro
Frame Rate
Card Capacity (FAT32)
16GB
32GB
64GB
128GB
DrivePro
110
Full HD 1080P 60fps
1 hr 30 min
3 hrs
6 hrs
12 hrs
Full HD 1080P 30fps
2 hrs
4 hrs 30 min
9 hrs
18 hrs
HD 720P 60fps
3 hrs 30 min
7 hrs
13 hrs 30 min
27 hrs
HD 720P 30fps
5 hrs
10hrs
20 hrs
40 hrs

6
3-3 Mounting the DrivePro
1. Insert the mount bracket into the top of the DrivePro, and slide sideways until you hear a click.
2. Thoroughly clean and dry the area of the windshield you wish to mount the DrivePro. If
possible, mount the DrivePro in the middle of the windshield near the rear-view mirrorfor the
best field of view.
3. Peel off the protective film from the mount bracket’s foam sticker, and firmly attach the
DrivePro to the windshield.
4. Turn the adjustment knob anticlockwise to loosen, and then adjust the DrivePro’s position.
5. After the DrivePro is in the best position, turn the adjustment knob clockwise to make sure
that the DrivePro is securely locked in place.

7
3-4 Connecting to Power
Note: Insert a microSD memory card before connecting the DrivePro to your car’s lighter
socket.
1. Connect the small end of the car adapter to the USB connector of the DrivePro.
2. Connect the other end of the car adapter to your car’s lighter socket.

8
3. After the car engine is switched on, the DrivePro will automatically turn on and start
recording.
4. After the car engine is switched off, the DrivePro will automatically save the current
recording, and power off.
Note: Lighter sockets of some types of vehicles will still supply power after the car engine is
turned off. If your car is of this type, please unplug your car video recorder from the
lighter socket to avoid unnecessary power consumption and unexpected issues.

9
3-5 Function Buttons
Mode
Video Recording
Power
Browse Files
Settings
Take Photos
Browse/Settings
Back*
Up
Down
OK
Video Playback
Back*
Play/Pause
/
Protected/Unprotected
Delete
View Photos
Back*
Up
Down
Delete
1. Press and hold the button for 3 seconds to manually turn on/off the DrivePro in any
mode.
2. Long press the button to quickly turn on/off the microphone
3. Long press the button to quickly enter Time-Lapse Video menu.
3-6 LED Indicator Reference Chart
LED Status
Definition
Solid Red
Standby
Flashing Red
Recording
3-7 Setting the Date and Time
To set the current date and time:
1. During video recording, press the Settings button .

10
2. Use / to select Date/Time Settings, and press .
3. Use / to adjust values, and press to move to the next block.
Repeat step 3 above until the date and time settings are complete.

11
4. Recording Videos
4-1 Recording Screen
1. Recording status indicator
2. Duration of your recording
3. FPS (frame per second)
4. Voice record status
5. Battery status
6. Current time
After the car engine is switched on, the DrivePro will automatically turn on and start recording.
By default, one video file is saved for every 3 minutes of recording. To adjust the recording length,
please refer to the Settings section in this manual.
After the car engine is switched off, the DrivePro will automatically save the current recording and
power off.
Note: Lighter sockets of some types of vehicles will still supply power after the car engine is
turned off. If your car is of this type, please unplug your car video recorder from the lighter
socket to avoid unnecessary power consumption and unexpected issues.
4-2 Emergency Recording
During video recording, press the emergency button on the left-hand side of the DrivePro to
manually activate emergency recording mode.
30% of the storage space will be saved for emergency video files. Video files recorded in
emergency mode are protected from being overwritten.

12
Manual Emergency Recording: During video recording, press the emergency button on the
left-hand side of the DrivePro to manually activate emergency recording mode. The emergency
icon will appear on the screen when activated.
G-Sensor Emergency Recording: During video recording, the DrivePro will automatically activate
Emergency Recording mode when detecting a collision.
If the G-Sensor sensitivity is set to “High”, even minor shocks will activate Emergency
Recording mode.
If the G-Sensor sensitivity is set to “Low”, only significant shocks will activate Emergency
Recording mode.
G-Sensor sensitivity can be adjusted or disabled in the Settings menu.
Note: The earliest emergency file will be overwritten by the latest emergency file recorded.
Low Battery
Please charge the DrivePro immediately after viewing the Low Battery warning to avoid errors
happening to the system time. Please avoid using the built-in battery to record videos directly.
Note: Please fully charge the DrivePro before using.

13
5. Browsing Photos and Playing Videos
5-1 Playing Videos / Browsing Photos
1. During video recording, press the Browse button .
2. Use / to select either Normal, Emergency or Snapshot, and press .
3. Use / to select the desired video file, and press .
4. Press to pause playback. Press again to resume playback.
5. Press to return to the video file list.

14
5-2 Deleting Videos
1. During playback of a video file, press . The message, “Delete?” will pop up.
2. Use / to select “Yes,” and press to delete the file.
5-3 Protecting Videos
1. During playback of a normal video file, press . The message, “Lock?”, will pop up.
2. Use / to select “Yes,” and press to protect the file.

15
6. Settings
In the Settings menu, you can adjust settings of video resolution, recording time and G-Sensor
sensitivity. You can also set the date/time/time zone, change the interface language, format the
memory card, or upgrade firmware.
1. During video recording, press the Settings button .
2. Use / to select the desired menu option, and press .
3. Use / to select the desired setting, and press .
4. Press to return to the Settings menu.
Menu Options
Resolution: Set the resolution/quality for video recording.
Available options: 1080P 60FPS (FHD) / 1080P 30FPS (FHD) / 720P 60FPS (HD) / 720P 30FPS
(HD)
(Note: Available options are displayed depending on your model.)
Exposure Value: Adjust exposure composition value to lighten or darken the preview
screen.
Available options: +2.0 / +1.5 / +1.0 / +0.5 / 0 / -0.5 / -1.0 / -1.5 / -2.0
Video Length: Set the recording length of each recorded video file.
Available options: 1 min / 3 mins / 5 mins

16
Video Stamp: Display the current time of the event of the video being recorded.
Available options: Disable / Enable
Time-Lapse Video: Set a preferred time interval to make time-lapse videos. Time-lapse
video mode can only be enabled manually; once enabled, it will replace Normal recording mode.
Available options: Disable / 1 sec per shot / 2 sec per shot / 4 sec per shot
Note: To prevent the car battery from being completely drained, the DrivePro will automatically
power off after 48 consecutive hours of recording in Time-Lapse Video mode.
G-Sensor: Adjust the sensitivity of the G-Sensor.
Available options: Disable / Low / Medium / High
Headlight Reminder: When the DrivePro detects poor lighting conditions, the headlight
reminder will automatically activate.
Available options: Disable / Enable
Driver Fatigue Alert: Remind the driver of the need to rest after driving for a preset,
driver-determined period of time.
Available options: Disable / 1 hour / 2 hours / 3 hours / 4 hours
Microphone: Turn on/off the microphone during video recording.
Available options: Disable / Enable
Volume: Set the speaker volume level.
Available options 0 ~7 (You can choose 0 to switch on Silent Mode)
Auto Display Off: Set duration for display to automatically turn off after recording begins.
Available options: Never / After 1 min / After 3 mins
Note: Auto Display Off is disabled when Headlight Reminder or Driver Fatigue Alert is enabled.
Delay Power Off: Schedule the DrivePro to shut down at a certain time.
Available options: Disable / 10 secs / 30 secs
Date/Time Settings: Set the current date, time, and time zone.
Light Frequency: Select the appropriate frequency to avoid flashing A/C light.
Available options: 50Hz / 60Hz
Language: Set the on-screen display menu language.
Available options: English / 繁體中文 / 简体中文 / 日本語 / Deutsch / Español / Français /

17
Italiano / Русский / Português / Ελληνικά / Türkçe / 한국어
Information: Display the DrivePro’s current firmware version, card capacity and free
space.
Format Card: Format the microSD memory card.
Available options: Cancel / Confirm
WARNING: Formatting will erase all the data stored in the card.
Restore Defaults: Reset all settings to factory default settings.
Available options: Cancel / Confirm
Upgrade Firmware: Keep your DrivePro up-to-date with the latest version downloaded
from Transcend website http://www.transcend-info.com/Support/service. To prevent data loss, it
is recommended that you backup your data to another location before upgrading the firmware of
your DrivePro 110.
1. After downloading firmware from Transcend website, decompress it and then put the
DP110V02.bin file in the “SYSTEM” folder of the microSD memory card.
2. Insert the microSD memory card that contains the latest firmware version.
3. Connect the DrivePro to an external power outlet. Do NOT remove the USB cable
while the firmware is being upgraded.
4. Select “Upgrade Firmware” from the “Settings” menu and press to start the
firmware detection process. The DrivePro will automatically find the latest firmware file.
Note: The firmware upgrade will take about 1-2 minutes. Please do not turn off the
DrivePro while upgrading. The DrivePro will restart automatically after the upgrade is
completed.

18
WARNING: NEVER remove the power cord or the microSD memory card while
the firmware is being upgraded.
If the DrivePro cannot be turned on due to firmware upgrade failure, please contact
Transcend customer service for technical support.

19
7. DrivePro Toolbox Software
The DrivePro Toolbox, developed for Windows, features a user-friendly interface that allows you to
select and play videos recorded on your DrivePro without the need to install separate codecs.
1. Download the installation files from: http://www.transcend-info.com/downloads
2. Install DrivePro Toolbox software on your desktop or laptop.
Useful features available for the DrivePro 110 include:
1. Video Sorting
Easily sort videos by file name, recorded date, or by group.
2. Smooth Video Playback
Connect the DrivePro or use a microSD card slot supported card reader or adapter to play back
recorded events on your Windows OS computer.
3. Video Trimming and Snapshots
You can select a video, trim it and save it as a new clip immediately.