Transmitter Solutions STINGER 2 User manual

Thank you for choosing a Transmitter Solutions product.
Please read this manual carefully before using the product.
Made in Taiwan. Copywrite © 2015 Transmitter Solutions.
The Transmitter Solutions
Transmitter Solutions
2(1¾” x
Transmitter Solutions Stinger2TM
The warranty period of Transmitter Solutions Stinger 2™transmitters is
twenty-four (24) months. This warranty shall begin on the date the
transmitter is manufactured. During the warranty period, the product will be
repaired or replaced (at the sole discretion of Transmitter Solutions) if the
product does not operate correctly due to a defective component. This
warranty does not extend to (a) the transmitter case, which can be damaged
by conditions outside the control of Transmitter Solutions, or (b) battery life
of the transmitter. This warranty is further limited by the following disclaimer
of warranty and liability:
EXCEPT AS SET FORTH ABOVE, TRANSMITTER SOLUTIONS MAKES NO WARRANTIES REGARDING THE
GOODS, EXPRESS OR IMPLIED, INCLUDING WARRANTY OF MERCHANTABILITY OR WARRANTY OF FITNESS
FOR A PARTICULAR PURPOSE. BUYER MAKES NO RELIANCE ON ANY REPRESENTATION OF TRANSMITTER
SOLUTIONS, EXPRESS OR IMPLIED, WITH REGARD TO THE GOODS AND ACCEPTS THEM
“AS-IS/WHERE-IS”. TRANSMITTER SOLUTIONS SELLS THE GOODS TO BUYER ON CONDITION THAT
TRANSMITTER SOLUTIONS WILL HAVE NO LIABILITY OF ANY KIND AS A RESULT OF THE SALE. BUYER
AGREES THAT TRANSMITTER SOLUTIONS SHALL HAVE NO LIABILITY FOR DAMAGES OF ANY KIND,
WHETHER DIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES, INCLUDING INJURIES TO PERSONS OR
PROPERTY, TO BUYER, ITS EMPLOYEES OR AGENTS, AS A RESULT OF THE SALE. BUYER ALSO AGREES TO
HOLD TRANSMITTER SOLUTIONS HARMLESS FROM ANY CLAIMS BUYER, OR ANY THIRD PARTY, MAY HAVE
AS A RESULT OF BUYER’S USE OR DISPOSAL OF THE GOODS. BUYER HAS READ THIS DISCLAIMER AND
AGREES WITH ITS TERMS IN CONSIDERATION OF RECEIVING THE GOODS.
NOTICE
Any changes or modifications to Transmitter Solutions equipment not
expressly approved by Transmitter Solutions could void the manufacturer’s
warranty and could void the user’s authority to operate the equipment.
3788 West 2270 South, Suite E
Salt Lake City, UT 84120
[phone] • [phone] FX
www.transmittersolutions.com
3” x ½”)
2
Type: 318ALD31V2
FCC ID: SU7318ALD31V

2
2
Black Case with Tan Button
1¾” x 3” x ½”