Traxon ecue LCE-mx User guide

Lighting Control Engine mx
Setup Manual
Discontinued

2
Setup Manual - Lighting Control Engine mx
Published by
Traxon Technologies Europe GmbH
Karl Schurz-Strasse 38
Paderborn, Germany
An OSRAM company
Lighting Control Engine mx
Setup Manual – Edition 12.09.12
©2012, Traxon Technologies Europe GmbH
All rights reserved
Comments and corrections:
[email protected]
For a most recent version of this manual please visit:
http://www.ecue.com/download
Discontinued

3
Setup Manual - Lighting Control Engine mx
Table of Contents
English ..........................................................................5
Security instructions ..............................................................................6
Delivery Content & Accessories............................................................ 7
Included in the package ........................................................................... 7
Optional accessories ................................................................................ 7
Transport .................................................................................................. 7
Cleaning ...................................................................................................7
Commissioning ....................................................................................... 8
Inspect the delivery content ..................................................................... 8
In case of returning the LCE-mx .............................................................. 8
Mounting the LCE-mx ..............................................................................8
Supplying power to the LCE-mx .........................................................10
Initial start up ........................................................................................ 10
System Configuration .............................................................................10
Setting the network address .................................................................. 11
Technical data ....................................................................................... 15
General data ........................................................................................... 15
Engine ..................................................................................................... 15
LCE-mx connections .............................................................................. 16
Deutsch.......................................................................17
Sicherheitshinweise ............................................................................. 18
Lieferumfang und Zubehör .................................................................. 19
Im Lieferumfang .....................................................................................19
Optionales Zubehör ................................................................................ 19
Transport ................................................................................................ 19
Reinigung ...............................................................................................19
Überprüfen des Lieferumfanges .........................................................20
Discontinued

4
Setup Manual - Lighting Control Engine mx
Rücksendung der LCE-mx ..................................................................... 20
Montage der LCE-mx ............................................................................. 20
Stromversorgung der LCE-mx ............................................................22
Inbetriebnahme ..................................................................................... 22
System-Konfiguration ............................................................................. 23
Programmer-Netzwerk-Adresse ............................................................. 26
Technische Daten ................................................................................. 27
Allgemeine Daten ................................................................................... 27
System ...................................................................................................27
LCE-mx-Anschlüsse ............................................................................... 28
Appendix .....................................................................29
Dimensions/Abmessungen.................................................................. 30
Discontinued

5
Setup Manual - Lighting Control Engine mx
English
Discontinued

6
Setup Manual - Lighting Control Engine mx
Security instructions
!
To reduce the risk of personal injury, electric shock, or damage to
the equipment, remove the power cord to remove power from the
server. Portions of the power supply and some internal circuitry
remain active until power is removed.
i
To prevent the device from overheating, only operate it in well-
ventilated environment. Ventilation slots may not be obstructed.
Do not install next to heat emitting sources or in a place subject to
direct sunlight or excessive dust.
Device components inside the system can reach high tempera-
tures! Do not open the system while in operation. Repairs may only
be carried out by authorized, specially trained personnel. When in
doubt, contact e:cue service.
i
Installation and maintenance of this product must be performed by
individuals who are knowledgeable about the procedures, precau-
tions and hazards associated with the product.
Discontinued

7
Setup Manual - Lighting Control Engine mx
Delivery Content & Accessories
Included in the package
• LCE-mx Lighting Control Engine
• Setup Manual
• e:cue Lighting Control Application USB License Dongle
• Wall mounting brackets and mounting material
Optional accessories
• Rail-mount AC power supply AC.IN.0120024
• Brackets for portrait mounting AC.EN.3000000
Transport
Only transport the LCE-mx in its original packaging. This protects the server
from damage. Only unpack the LCE-mx at its installation location. To protect the
device against condensation water, unpack it and wait until all moisture remain-
ing in the LCE-mx has evaporated. Condensation can occur when the device is
moved from a cold to a warm location.
Cleaning
To clean the device, disconnect it from the line power supply. Disconnect all
devices connected to the server. Depending on the operating environment, the
server interior must be cleaned. This cleaning may only be carried out by skilled
personnel. Do not use any cleaning agents containing solvents (e.g. acetone,
alcohol or thinner) or abrasives. The housing surface and touch-screen can be
cleaned with a moist, lint-free cloth. Ensure that no water penetrates into the
housing. Otherwise, this could damage the electronics.
Discontinued

8
Setup Manual - Lighting Control Engine mx
Commissioning
Inspect the delivery content
Unpack the LCE-mx and inspect all parts for completeness. Keep the packaging
for use in case of further transport. If there is apparent damage to the device or
parts are missing from the delivery scope, please contact e:cue service.
In case of returning the LCE-mx
When returning the LCE-mx for any reason, e. g. for exchange, be sure to watch
the following notes:
• Always care for proper backup of all user data like shows, images and media
les. Data backup is responsibility of the user, e:cue cannot guarantee that
user data are kept.
• Remove the USB license dongle and keep it at a save place. The dongle
stores the credits for the Lighting Application Suite and may be upgraded.
Mounting the LCE-mx
You can mount the LCE-mx in racks as well as on walls or on DIN rails. As
delivered, the LCE-mx is congured as a DIN rail device. The hardware for other
mounting methods is included in the delivery scope. If mounting the LCE-mx in
a rack, ensure that the server rack is sufciently ventilated.
The new portrait assembly kit facilitates installation of the LCE-mx in the control
cabinet using the smallest side, thus saving on valuable installation space.
Use the various mounting brackets to fasten the LCE-mx at a secure and well
ventilated place. Use the cabinet holes to ensure proper strain relief for the con-
nected cables.
Discontinued

9
Setup Manual - Lighting Control Engine mx
1 DIN rail mounting
brackets preinstalled
all interfaces to down side
2 Horizontal wall mounting
with brackets for wall mounting
all interfaces to down side
3 Vertical wall mounting
with brackets for wall mounting
all interfaces to left side
4 Portrait mounting
brackets as accessories
all interfaces to front
Discontinued

10
Setup Manual - Lighting Control Engine mx
Supplying power to the LCE-mx
The device should only be connected to a 24 V DC power
supply which satises the requirements of safe extra low
voltage (SELV).
If the device is used on a wall, in an open rack or other similar
locations, an NEC Class 2 current source is required in order
to meet the UL requirements (UL 60950-1). In all other cases
(IEC / EN / DIN EN 60950-1) either a current source of limited output (LPS = Low
Power Source), or a line-side fuse or a line-side circuit breaker is necessary. The
power needs to be limited to a value below 4.16 A. Fuse value required: max.
4 A.
Use the special plug supplied to connect the
supply voltage. Connect the PE conductors
to the housing. The permitted cable
cross-section for the 24 V DC connection is
0.75 sqmm to 2.5 sqmm. The conductor
cross-section must not be less than 2.5
sqmm. Required tool for protective earth
terminal: TORX T20 screwdriver
Initial start up
Connect your devices to the server and connect with the power supply. Switch
on the LCE-mx with the power switch. The LED indicators light up in green.
Do not switch off the server with the main switch, but use the Windows shut-
down function to prevent loss of data.
i
Change the Windows administrator password within six weeks after
rst startup. Otherwise the password will expire and cannot be reset
anymore!
System Conguration
All steps shown here relate to the English version of Microsoft® Windows 7™.
If you have a different language version, it is possible that expressions change.
The default language of the operating system is English.
Discontinued