manuals.online logo
Brands
  1. Home
  2. •
  3. Brands
  4. •
  5. Traxxas
  6. •
  7. Motorized Toy Car
  8. •
  9. Traxxas 67014-4 User manual

Traxxas 67014-4 User manual

This manual suits for next models

1

Other Traxxas Motorized Toy Car manuals

Traxxas 41096-3 User manual

Traxxas

Traxxas 41096-3 User manual

Traxxas Rustler 3701 User manual

Traxxas

Traxxas Rustler 3701 User manual

Traxxas E Revo 5605 User manual

Traxxas

Traxxas E Revo 5605 User manual

Traxxas TRX4 Scale and Trail Crawler 82056-4 User manual

Traxxas

Traxxas TRX4 Scale and Trail Crawler 82056-4 User manual

Traxxas Robby Gordon DAKAR TRUCK EDITION Series User manual

Traxxas

Traxxas Robby Gordon DAKAR TRUCK EDITION Series User manual

Traxxas Stampede VXL 36076-1 User manual

Traxxas

Traxxas Stampede VXL 36076-1 User manual

Traxxas Fiesta ST Rally User manual

Traxxas

Traxxas Fiesta ST Rally User manual

Traxxas Nitro Rustler User manual

Traxxas

Traxxas Nitro Rustler User manual

Traxxas 5414 User manual

Traxxas

Traxxas 5414 User manual

Traxxas Nitro Sport User manual

Traxxas

Traxxas Nitro Sport User manual

Traxxas Revo 3.3 53097 User manual

Traxxas

Traxxas Revo 3.3 53097 User manual

Traxxas Nitro 4-Tec 3.3 48077 User manual

Traxxas

Traxxas Nitro 4-Tec 3.3 48077 User manual

Traxxas 58064-1 User manual

Traxxas

Traxxas 58064-1 User manual

Traxxas 1/16 E REVO VXL BRUSHLESS User manual

Traxxas

Traxxas 1/16 E REVO VXL BRUSHLESS User manual

Traxxas TRX4 82056-4 User manual

Traxxas

Traxxas TRX4 82056-4 User manual

Traxxas CompetitionX KEN BLOCK GYMKHANA FIESTA 7309 User manual

Traxxas

Traxxas CompetitionX KEN BLOCK GYMKHANA FIESTA 7309 User manual

Traxxas RUSTLER 4x4 67064-1 User manual

Traxxas

Traxxas RUSTLER 4x4 67064-1 User manual

Traxxas Slash 4x4 68086 User manual

Traxxas

Traxxas Slash 4x4 68086 User manual

Traxxas 49077-3 User manual

Traxxas

Traxxas 49077-3 User manual

Traxxas Slayer Pro 4WD 5908 User manual

Traxxas

Traxxas Slayer Pro 4WD 5908 User manual

Traxxas High Trail TRX-4 User manual

Traxxas

Traxxas High Trail TRX-4 User manual

Traxxas TRX-4 Mercedes-Benz G500 User manual

Traxxas

Traxxas TRX-4 Mercedes-Benz G500 User manual

Traxxas 68086-4 User manual

Traxxas

Traxxas 68086-4 User manual

Traxxas 4902 User manual

Traxxas

Traxxas 4902 User manual

Popular Motorized Toy Car manuals by other brands

Reely Dune Fighter 3S operating instructions

Reely

Reely Dune Fighter 3S operating instructions

REVELL 1970 Chevelle SS 454 manual

REVELL

REVELL 1970 Chevelle SS 454 manual

Team Losi Micro Rally Car Operation guide

Team Losi

Team Losi Micro Rally Car Operation guide

Jamara Mercedes-AMG GLE 63 Instruction

Jamara

Jamara Mercedes-AMG GLE 63 Instruction

Eduard Humber Scout Car Mk.I exterior quick start guide

Eduard

Eduard Humber Scout Car Mk.I exterior quick start guide

Jamara VW T1 Bus Instruction

Jamara

Jamara VW T1 Bus Instruction

REVELL 68 CHEVY CHEVELLE SS 396 manual

REVELL

REVELL 68 CHEVY CHEVELLE SS 396 manual

Schumacher Pro Cat instruction manual

Schumacher

Schumacher Pro Cat instruction manual

Tamiya TT-01 TYPE E instruction manual

Tamiya

Tamiya TT-01 TYPE E instruction manual

Eduard Krupp Protze 6x4 1/48 quick start guide

Eduard

Eduard Krupp Protze 6x4 1/48 quick start guide

New Bright 61072UEP quick start guide

New Bright

New Bright 61072UEP quick start guide

Team Durango DEX410v5 manual

Team Durango

Team Durango DEX410v5 manual

Jamara Mercedes Actros Muldenkipper 2,4 GHz Instruction

Jamara

Jamara Mercedes Actros Muldenkipper 2,4 GHz Instruction

PLAYMOBIL 9536 manual

PLAYMOBIL

PLAYMOBIL 9536 manual

Atomic BZ3 instruction manual

Atomic

Atomic BZ3 instruction manual

Jamara McLaren Senna 2,4GHz instructions

Jamara

Jamara McLaren Senna 2,4GHz instructions

Aiyaplay 370-290V00 user manual

Aiyaplay

Aiyaplay 370-290V00 user manual

ZEROTRIBE Zetricks ZT1144 instruction manual

ZEROTRIBE

ZEROTRIBE Zetricks ZT1144 instruction manual

manuals.online logo
manuals.online logoBrands
  • About & Mission
  • Contact us
  • Privacy Policy
  • Terms and Conditions

Copyright 2025 Manuals.Online. All Rights Reserved.

ASSEMBLY MANUAL
MODEL 67014-4
2 •STAMPEDE 4X4
SAFETY PRECAUTIONS
Your model is able to use LiPo
batteries. Charging and discharging batteries has the
potential for re, explosion, serious injury, and property damage if
not performed per the instructions. Before use, read and follow all
manufacturer’s instructions, warnings, and precautions. In addition,
Lithium Polymer (LiPo) batteries pose a SEVERE risk of re if not
properly handled per the instructions and require special care and
handling procedures for long life and safe operation. LiPo batteries
are intended only for advanced users that are educated on the risks
associated with LiPo battery use. Traxxas does not recommend
that anyone under the age of 18 use or handle LiPo battery packs
without the supervision of a knowledgeable and responsible adult.
Dispose of used batteries according to the instructions.
Important Warnings for users of Lithium Polymer (LiPo) batteries:
• Your model is able to use LiPo batteries. LiPo batteries have a
minimum safe discharge voltage threshold that should not be
exceeded. The electronic speed control is equipped with built-in
Low-Voltage Detection that alerts the driver when LiPo batteries
have reached their minimum voltage (discharge) threshold. It is the
driver’s responsibility to stop immediately to prevent the battery
pack from being discharged below its safe minimum threshold.
• Low-Voltage Detection is just one part of a comprehensive plan
for safe LiPo battery use. It is critical to follow all instructions for
safe and proper charging, use, and storage of LiPo batteries. Make
sure you understand how to use your LiPo batteries. If you have
questions about LiPo battery usage, please consult with your local
hobby dealer or contact the battery manufacturer. As a reminder,
all batteries should be recycled at the end of their useful life.
• ONLY use a Traxxas iD charger to charge Traxxas iD batteries.
ONLY use a Lithium Polymer (LiPo) balance charger with a balance
adapter port to charge LiPo batteries. Never use NiMH or NiCad-
type chargers or charge modes to charge LiPo batteries. DO NOT
charge LiPo batteries with a NiMH-only charger. The use of a NiMH
or NiCad charger or charge mode will damage LiPo batteries and
may cause re, personal injury, and/or property damage.
• NEVER charge LiPo battery packs in series or parallel. Charging
packs in series or parallel may result in improper charger cell
recognition and an improper charging rate that may lead to
overcharging, cell imbalance, cell damage, and re.
• ALWAYS inspect your LiPo batteries carefully before charging.
Look for any loose leads or connectors, damaged wire insulation,
damaged cell packaging, impact damage, uid leaks, swelling
(a sign of internal damage), cell deformity, missing labels, or
any other damage or irregularity. If any of these conditions are
observed, do not charge or use the battery pack. Follow the
disposal instructions included with your battery to properly and
safely dispose of the battery.
• DO NOT store or charge LiPo batteries with or around other
batteries or battery packs of any type, including other LiPos.
• Store and transport your battery pack(s) in a cool dry place.
DO NOT store in direct sunlight. DO NOT allow the storage
temperature to exceed 140°F or 60°C, such as in the trunk of a car,
or the cells may be damaged and create a re risk.
• DO NOT disassemble LiPo batteries or cells.
• DO NOT attempt to build your own LiPo battery pack from
loose cells.
Charging and handling precautions for all battery types:
• BEFORE you charge, ALWAYS conrm that the charger
settings exactly match the type (chemistry), specication, and
FIRE HAZARD!
WARNING! CAUTION! DANGER!
conguration of the battery to be charged. DO NOT
exceed the maximum manufacturer recommended
charge rate.
• DO NOT attempt to charge non-rechargeable batteries (explosion
hazard), batteries that have an internal charge circuit or a
protection circuit, batteries that have been altered from original
manufacturer conguration, or batteries that have missing or
unreadable labels, preventing you from properly identifying the
battery type and specications. ALWAYS use a Traxxas iD charger
to charge Traxxas iD batteries. DO NOT use a non-Traxxas charger
to charge Traxxas iD batteries. It is not recommended, but if you
choose to use a non-Traxxas charger or battery, read and follow all
of the manufacturer’s warnings and instructions.
• DO NOT let any exposed battery contacts or wires touch each
other. This will cause the battery to short circuit and create the risk
of re.
• While charging or discharging, ALWAYS place the battery (all types
of batteries) in a re retardant/re proof container and on a non-
ammable surface such as concrete.
• DO NOT charge batteries inside of an automobile. DO NOT charge
batteries while driving in an automobile.
• NEVER charge batteries on wood, cloth, carpet, or on any other
ammable material.
• ALWAYS charge batteries in a well-ventilated area.
• REMOVE ammable items and combustible materials from the
charging area.
• DO NOT leave the charger and battery unattended while
charging, discharging, or anytime the charger is ON with a battery
connected. If there are any signs of a malfunction or in the event
of an emergency, unplug the charger from the power source and
disconnect the battery from the charger.
• DO NOT operate the charger in a cluttered space, or place objects
on top of the charger or battery.
• If any battery or battery cell is damaged in any way, DO NOT
charge, discharge, or use the battery.
• Keep a Class D re extinguisher nearby in case of re.
• DO NOT disassemble, crush, short circuit, or expose the batteries
to ame or other source of ignition. Toxic materials could be
released. If eye or skin contact occurs, ush with water.
• If a battery gets hot to the touch during the charging process
(temperature greater than 110°F / 43°C), immediately disconnect
the battery from the charger and discontinue charging.
• Allow the battery pack to cool o between runs (before charging).
• ALWAYS unplug the charger and disconnect the battery when not
in use.
• ALWAYS unplug the battery from the electronic speed control
when the model is not in use and when it is being stored or
transported.
• DO NOT disassemble the charger.
• REMOVE the battery from your model or device before charging.
• DO NOT expose the charger to water or moisture.
• ALWAYS store battery packs safely out of the reach of children
or pets. Children should always have adult supervision when
charging and handling batteries.
• Nickel-Metal Hydride (NiMH) batteries must be recycled or
disposed of properly.
• Always proceed with caution and use good common sense at all
times.
STAMPEDE 4X4 •3
All of us at Traxxas want you to safely enjoy your new
model. Operate your model sensibly and with care, and
it will be exciting, safe, and fun for you and those around
you. Failure to operate your model in a safe and responsible
manner may result in property damage and serious injury.
The precautions outlined in this manual should be strictly
followed to help ensure safe operation. You alone must see
that the instructions are followed and the precautions are
adhered to.
Important Points to Remember
• Your model is not intended for use on public roads or
congested areas where its operation can conict with or
disrupt pedestrian or vehicular trac.
• Never, under any circumstances, operate the model in
crowds of people. Your model is very fast and could cause
injury if allowed to collide with anyone.
• Because your model is controlled by radio, it is subject to
radio interference from many sources that are beyond your
control. Since radio interference can cause momentary
losses of radio control, always allow a safety margin in all
directions around the model in order to prevent collisions.
• The motor, battery, and speed control can become hot
during use. Be careful to avoid getting burned.
• Don’t operate your model at night, or anytime your line
of sight to the model may be obstructed or impaired in
any way.
Speed Control
Your model’s electronic speed control (ESC) is an extremely
powerful electronic device capable of delivering high
current. Please closely follow these precautions to prevent
damage to the speed control or other components.
• Disconnect the Battery: Always disconnect the battery or
batteries from the speed control when not in use.
• Insulate the Wires: Always insulate exposed wiring with
heat shrink tubing to prevent short circuits.
• Transmitter on First: Switch on your transmitter rst before
switching on the speed control to prevent runaways and
erratic performance.
• Don’t Get Burned: The ESC and motor can become
extremely hot during use, so be careful not to touch them
until they cool. Supply adequate airow for cooling.
• Use the Factory-Installed Connectors: Do not change the
battery and motor connectors. Improper wiring can cause
re or damage to the ESC. Please note that modied speed
controls can be subject to a rewiring fee when returned for
service.
• No Reverse Voltage: The ESC is not protected against
reverse polarity voltage.
• No Schottky Diodes: External Schottky diodes are not
compatible with reversing speed controls. Using a Schottky
diode with your Traxxas speed control will damage the ESC
and void the 30-day warranty.
• Always adhere to the minimum and maximum limitations
of the speed control as stated in the specications table in
the Owner’s Manual. If your ESC operates on two batteries,
do not mix battery types and capacities. Use the same
voltage and capacity for both batteries. Using mismatched
battery packs could damage the batteries and electronic
speed control.
Recycling Traxxas Power Cell NiMH Batteries
Traxxas strongly encourages you to recycle Power Cell NiMH
batteries when they reach the end of their useful life. Do
not throw batteries in the trash. All Power Cell NiMH battery
packs display the RBRC (Rechargeable Battery Recycling
Corporation) icon, indicating they are recyclable. To nd a
recycling center near you, ask your local hobby dealer or visit
www.call2recycle.org.
SAFETY PRECAUTIONS
4 •STAMPEDE 4X4
INTRODUCTIONINTRODUCTION
Thank you for purchasing the Traxxas Stampede 4X4
unassembled kit. Whether you’re going through muddy
water crossings or just having fun crushing your buddies’
cars, the Stampede 4X4 just doesn’t know when to quit. The
Stampede 4X4 is overbuilt and Traxxas Tough to withstand
all the 4-wheel drive monster mayhem you can dish out.
Its tall, drive-over-anything ground clearance and ultra-
tough, long-arm suspension make Stampede 4X4 feel nearly
indestructible. Chrome All-Star™ 2.8”wheels give Stampede
4X4 aggressive style, and soft Chevron Maxx™ tires deliver
true multi-terrain capability.
This manual details the assembly of the Stampede 4X4. This
manual will also acquaint you with the model’s many dierent
components and its mechanical operation. Read through
the manual and examine the model carefully before opening
any of the parts bags included in the kit. If for some reason
you think the model is not what you wanted, then do not
continue any further. Your hobby dealer absolutely cannot
accept a model for return or exchange which has been run or
contains open bags.
If you have any questions about your Stampede 4X4, call
Traxxas’technical support department at 1-888-TRAXXAS
(1-888-872-9927) (U.S. residents only). Outside the U.S., call
+1-972-549-3000). Technical support is available Monday
through Friday, from 8:30am to 9:00pm central time. Technical
assistance is also available at Traxxas.com/support or via
e-mail at support@Traxxas.com.
Join thousands of registered members in our online
community at Traxxas.com. Traxxas oers a full-service, on-
site repair facility to handle any of your Traxxas service needs.
Maintenance and replacement parts may be purchased
directly from Traxxas by phone or online at Traxxas.com. You
can save time, along with shipping and handling costs, by
purchasing replacement parts from your local dealer.
Do not hesitate to contact us with any of your product
support needs. We want you to be thoroughly satised with
your new model!
ASSEMBLY HINTS
To assemble this kit, you’ll need a large at working area
where you will have plenty of room to build. Be sure it’s a
place where you can leave your work spread out and not in
the way when you want to take a break from the assembly.
Allow yourself plenty of time to build this kit; assembly time is
going to vary with each individual. Experienced builders may
only need 4-5 hours to assemble this kit, while others may
spend an entire weekend on it. You should feel comfortable
with taking as much time as needed to properly build and set
up your model.
If you’ve been exploring the contents of your kit box, you’ve
noticed many bags of small parts. Open only one bag at a
time. To keep the parts organized, use small paper plates
or several large plastic plates with partitions to contain the
parts. Label the paper plates, and then pour the contents
of the bags onto them. This puts the parts out in the open
where you can nd them easily. The plates also prevent small
parts from rolling o the table.
Please read the text next to each diagram. The text contains
important information, such as assembly steps, screw sizes,
and part numbers. Also, pay attention to any notes that may
follow some steps. Before you attempt to run your newly-built
model, please read all of the instructions and precautions
included in the Owner’s Manual. You can download the
Owner’s Manual for the Stampede 4X4, as well as the manuals
for all Traxxas vehicles, at Traxxas.com.
Remember, as you assemble your Traxxas model, you are not
alone. If you have any questions or run into diculties, call
Traxxas’technical support department at 1-888-TRAXXAS (1-
888-872-9927) (U.S. residents only). Outside the U.S., call +1-
972-549-3000). Technical support is available 7 days a week
from 8:30am to 9:00pm central time.
ITEMS YOU WILL NEED
Some of the tools that you may need in the maintenance and
repair of your model have been provided. These include:
• 1.5mm “L” wrench
• 2.0mm “L” wrench
• 2.5mm ball wrench
• 4-way wrench
• U-joint wrench
• 4mm / 8mm wrench
Required but not included:
• Traxxas Ultra Premium Tire Glue (CA glue) (part #6468)
• 4 AA alkaline batteries
• NiMH battery pack or LiPo battery pack
• NiMH/LiPo battery charger
• Safety glasses
• Needle nose pliers
The following items are not required for the operation of your
model, but are a good idea to include in any RC toolbox:
• Metric hex driver set (part #3415)
(highly recommended for kit assembly)
• Hobby knife
• Side cutters
These items can be purchased from your hobby dealer.
STAMPEDE 4X4 •5
INTRODUCTIONINTRODUCTION
HARDWARE DESCRIPTIONS
The following chart is provided to help you identify the many dierent sizes and types of hardware that are used in the
assembly of this model. Note the dierence between the length measurements of the roundhead and countersunk screws.
A ruler is provided at the bottom of each page to measure the length of the screws in millimeters.
3x12mm Countersunk Screw 3x12mm Buttonhead Screw
3mm
12mm
3mm
12mm
5x10x4mm Ball Bearing
4mm
10mm 5mm
CCS Countersunk Cap Screw GS Set (Grub) Screw
CS Cap Screw PTW PTFE Washer
FCS Flathead Cap Screw MW Metal Washer
BCS Buttonhead Cap Screw EE-Clip
CSS Cap Shoulder Screw BB Ball Bearing
NL Nylon Locknut
Repeat Icon
Repeat step the number
of times indicated.
Optional Part Icon
Optional part available.
Refer to included
parts list.
Aluminum Part Icon
Aluminum accessory
part available. Refer to
included parts list.
x2
x4
ICON DESCRIPTIONS
There are icons in this assembly instruction which indicate certain actions needed during assembly.
Turn Icon
Indicates assembly
needs to be ipped
or turned around.
Oil Bottle
Black: Use included
silicone shock oil.
White: Use included
dierential uid.
Grease Tube
Apply included
grease to part
indicated.
White: Silicone
Dark: Black Lithium
RADIO SYSTEM INSTRUCTIONS
The Traxxas TQ 2.4GHz radio system is provided with your unassembled kit. Complete instructions for operating
the radio system are included in the Stampede 4X4 Owner’s Manual. You can download the Owner’s Manual for the
Stampede 4X4, as well as the manuals for all Traxxas vehicles, at Traxxas.com.
WARRANTY STATEMENT
Every eort has been made in component design and material selection to make your model as durable as possible
and still maintain a weight consistent with good handling. Because this model is intended for operation under severe
conditions, no warranties are expressed nor implied relating to the longevity of the parts. If you nd that a part has
a defect in materials or workmanship, please return it to us BEFORE IT IS USED, and we will gladly replace it. Damage
caused by excessive force, abuse, neglect or failure to adhere to the precautions outlined in the literature contained with
your model will void the warranty.
6 •STAMPEDE 4X4
A. DIFFERENTIAL ASSEMBLY
Dierential Carrier
Dierential
Carrier
Dierential Output
Gear
6x9.5x0.5 PTFE
Washer
X-Ring
Dierential
Gasket
Spider Gear
Assembly
30K Dierential Oil
DIFFERENTIAL BAG
x2 x2
Spider gear assembly
Crosspin
Fill dierential carrier
half way with included
30K dierential oil.
Completed dierential assemblies
Spider Gear (2)
Ring Gear
A1. Install output and spider gears into dierential carrier A2. Add dierential uid
A4. Install ball bearings
Dierential Gasket
Dierential Output Gear (2)
6x9.5x0.5 PTFE Washer
X-Ring (2)
Spider Gear Shaft
2.5x8mm CS (4)
Dierential
Output Gear
X-Ring
2.5x8mm CS
x2 x2
A3. Install output gear into ring gear and assemble onto dierential carrier
Ring Gear
8x16x5 BB
10x15x4 BB
10x15x4mm BB
8x16x5mm BB
Tip: Lubricate the shaft of the dierential output
gear with a drop of 30K dierential oil before
installing the X-ring.
Tip: Lubricate the shaft of the dierential
output gear with a drop of 30K dierential
oil before installing the X-ring.
Tighten screws in
a cross pattern
1 2
3
4
ACCESSORY
Option Part
5379X Ring gear, dierential/
pinion gear, dierential for
brushless models
STAMPEDE 4X4 •7
ACCESSORY
Option Part
Titanium Nitride
Shock Shafts
1664T Long
2656T XX-long
Aluminum Accessory
Aluminum Shock Caps
3767A - Blue
3767G - Green
3767X - Red
SHOCK BAG
Shock Assemblies
Silicone Shock Oil
Front Shock Springs
Rear Shock Springs
Upper Spring Retainers (4)
Lower Spring Retainers (4)
Preload Spacers (2)
B. SHOCK ASSEMBLY
B1. Assemble front and rear shocks x4
Exercise shock to make sure it compresses fully. If it does not, it is overlled.
1.5mm
(1/16")
3mm
(1/8")
Fill with
shock oil
Unscrew
cap
Slowly move piston
to remove excess
air, then let sit a few
minutes until all the
bubbles are out.
Add oil to reach the
proper level. Ensure
the piston is covered in
oil to prevent pulling
air into the shock.
*8mm preload spacer on front shocks only
Note: Shaft should
be fully compressed
when cap is installed.
1 2 3 54
Upper Spring
Retainer
Lower Spring
Retainer
Preload
Spacer*
Shock
Spring
Shock Cap
Rubber
Diaphragm
Shock Exploded View
Front Shocks
Assembled
Rear Shocks
Assembled
8mm
Preload
Spacer
8 •STAMPEDE 4X4
ACCESSORY
Aluminum Accessory
6839X Shock Tower
C. FRONT MODULE ASSEMBLY
Black Lithium Grease
DIFFERENTIAL BAG
FRONT BULKHEAD BAG
FRONT BULKHEAD BAG
C1. Install dierential housing onto front bulkhead
C3. Install dierential assembly
C2. Install 12T pinion gear into dierential housing
Front Dierential Housing
Front Bulkhead
12T Pinion Gear
6x12x4mm BB (2)
4x12mm CCS (2) 12T Pinion
Gear
6x12x4 BB
6x12x4 BB
Front Bulkhead
4x12mm CCS
Front Dierential
Housing
Apply drop
of grease
Dierential
Assembly
Front Dierential Cover
Front Dierential
Cover
Front Shock Tower
Front Shock
Tower
3x10mm BCS (2)
3x10mm
BCS
3x15mm BCS (2)
3x15mm
BCS
STAMPEDE 4X4 •9
ACCESSORY
Aluminum Accessory
6823R Red Tie Bar
C. FRONT MODULE ASSEMBLY
FRONT BULKHEAD BAG
FRONT BULKHEAD BAG
C4. Install front suspension arms
C5. Install lower skidplate
Front Suspension Arms (L&R)
Front Tie Bar
Front Tie
Bar
3x15mm BCS
4x10mm CCS (3)
3x15mm BCS
Front Suspension Pins (2)
Front Lower Skidplate
Front
Suspension Pin
Front
Suspension Pin
Right Front
Suspension
Arm
Left Front
Suspension
Arm
Front Lower
Skidplate
4x10mm CCS
10 •STAMPEDE 4X4
ACCESSORY
Aluminum Accessory
1654X Wheel Hubs
FRONT BULKHEAD BAG
FRONT BULKHEAD BAG
C6. Assemble front hubs
C7. Install front driveshafts into hub assemblies
C. FRONT MODULE ASSEMBLY
Right Front Hub
Assembly
Left Front Hub
Assembly
5x11x4mm BB
5x11x4mm BB
10x15x4mm
BB
10x15x4mm
BB
3x12mm
CSS
3x12mm
CSS
3x12mm
CSS
3x12mm
CSS
Steering Blocks (L&R)
Outer Driveshaft
Inner Driveshaft
5x8x0.5 PTFE Washer
Left Steering
Block
Right Steering
Block
Right
Caster
Block
Left Caster
Block
Caster Blocks (L&R)
x2
10x15x4mm BB (2)
3x12mm CSS (4)
5x11x4mm BB (2)
Wheel Adapter
2x9.8mm Pin
Inner Driveshaft
Outer Driveshaft
Front Hub
Assembly
Front Driveshaft
Assembly
5x8x0.5 PTFE
Washer
2x9.8mm
Pin
Wheel Adapter
ACCESSORY
Aluminum Accessory
6832X Blue Caster Block
6832R Red Caster Block
6837X Blue Steering Block
6837R Red Steering Block
Option Part
6851R Constant-
Velocity Driveshafts