TREBLAB xRun User manual

xRun
WIRELESS EARBUDS
USER’S MANUAL

xRun
1. TREBLAB xRun
1.
2. Silicone ear-tips
3. Foam ear-tips
4. Carrying caser
5. User’s manual
6. Charging cable
7. Cord minder
2. L M S
5.
L M S
3.
6.
7.
4.

Vol- / Previous track
/ Next track
Vol+
Power
Micro-USB port
LED
Mic
Our earbuds provide superior sound quality and
mobility, combined with light-weight construction and the
convenience of hands-free wireless operation. Before
using this product, please read this manual.
Thank you for choosing TREBLAB xRun!

WEARING YOUR HEADSET
Using appropriate-sized ear-tips is critical for maximum
external noise isolation and a snug, secure fit. It is also
common to have different sized ear canals, so try the
ear-tips one at a time to find the best fit for each side.
To seat the
xRun earbuds firmly, try gently pulling on the
outer rim of your ear to ease the tip into a comfortable
position. You should notice a drop in ambient noise when
the tip is seated correctly. And when you're listening to
music, you'll notice more range.
Function
Power On
Power O
Pause / Play
Volume+
Volume-
Next track
Previous track
Answering call
End call
Reject
Redial
Mute
Operation
Press and hold POWER for 1 second
Press and hold
POWER for 3 seconds
Press
POWER button
Press
Volume+ button
Press
Volume- button
Press and hold
Volume+ for 1 second
Press and hold
Volume- for 1 second
Press
POWER during the incoming call
Press
POWER during the conversation
Press and hold
POWER during the
incoming call
Press
POWER button twice
Press
POWER button twice during the
conversation

To change the foam ear-tips :
To change the silicone ear-tips:
1.
Put the rubber inner part of the foam ear-tip on the top
of the nozzle.
2. Rotate and push down on the ear nozzle, trying to
forcibly “wrap”it into the inner rubber part of the ear-tip,
using a kind of screwing movement.
1. Turn over the ear-tip upper cover.
2. Rotate and firmly push the ear-tip tube to cover the
earbud pillar.
3. Turn the ear-tip upper cover back down on the nozzle.

SETTING UP YOUR TREBLAB xRun
Turn ON
Press and hold the POWER button for 1 second. You will
hear a “Power ON” voice prompt, and the blue & red LED
light will start flashing.
Turn OFF
Press and hold the POWER button for 3 seconds. You will
hear a “Power OFF” voice prompt, and the flashing blue
LED light will go off.
PAIRING
Make sure TREBLAB xRun is fully charged and turned
OFF.
When you turn the earbuds ON, they will try to reconnect
with the most-recently connected device. If reconnection
does not happen automatically, the earbuds will try to find
the next device in the pairing list.
1. Press and hold the POWER button on the right earbud for 1
second. You will hear the “Power ON” voice prompt, and
“PAIRING” a few seconds later (LED will flash red and blue
rapidly). Release your finger.
2. Activate the wireless connection option on your smart
device and keep it within 3 feet / 1 meter while pairing.
3. Using your smart device, scan/search for available devices.
4. Select TREBLAB xRun from the device list.
5. If prompted for the password, enter “0000”.
6. Once xRun is successfully paired and connected, you will
hear a “CONNECTED” voice prompt, and the LED will start
flashing blue every 5 seconds.

MULTI-POINT CONNECTION
TREBLAB xRun is enabled with a multi-point connection
function, meaning it can be paired to 2 devices at a time.
To connect
xRun to the second device:
1. Temporarily switch
OFF the wireless mode on the first
device you connected to.
2. Repeat steps 1-6 and connect to the other device.
3. Turn the wireless mode back ON for the first device.
When you turn the earbuds ON, they will try to reconnect
with the most-recently connected device. If reconnection
does not happen automatically, the earbuds will try to find
the next device in the pairing list.
AUDIO PLAYBACK
To pause and resume playback, press the POWER button.
To adjust volume, briefly press the Volume+ button to
turn the volume up and
Volume- button to turn the
volume down.
To change tracks on
xRun , press and hold Volume+
button to play the next track and Volume- button to
play the previous track.
PHONE CALLS MANAGEMENT
TREBLAB xRun can be used to make and receive phone
calls when connected wirelessly. Audio playback will be
paused during calls.

TROUBLESHOOTING
To Answer Call
To Reject Call
To End Call
To Redial
To Mute
Press
POWER button during
the incoming call.
Press and hold
POWER button
for 2 seconds.
Press
POWER button while on
the phone.
Press
POWER button twice.
Press
POWER button twice
during a call.
Problem
Not powering on
Not pairing
Solution
Make sure the headset is fully charged.
Charge for 2 hours, if necessary.
Reset the earbuds:
Press and hold the POWER and
Volume+ buttons simultaneously for 3
seconds, while pairing, until the LED
flashes blue and red 3 times.
Make sure the headset is not paired with
any other devices, as it can only pair with
two devices at a time.
Press and hold the POWER and Volume+
buttons simultaneously for 3 seconds,
while pairing, until the LED
flashes blue
and red 3 times. This will force the headset
to forget previously paired devices.
Repeat the steps for pairing as previously
described.
Alternatively, disconnect the device from
your headset and remove TREBLAB
xRun from your device’s pairing list. Try to
pair again.

Not finding a
wireless driver
on your laptop
Frequent
disconnection
and noise
Make sure your laptop supports wireless
connections. If it doesn’t, you will need an
external wireless USB adapter compatible
with your laptop. For further details,
consult with your laptop manufacturer.
Ensure that the distance between your
device and the headset is less than 33
feet / 10 meters.
Ensure that nothing is blocking the signal
between your device and the xRun .
Check if the music is paused.
Check if the volume level is set both on
the source device and on the earbuds.
Check if the headset is running out of
power.
Check if the network speed is sufficient
for music / video streaming (when listening
online).
RESTORE FACTORY SETTINGS
To restore the earbuds back to factory settings:
1. Turn the headset ON.
2. While pairing, press and hold POWER and Volume+
buttons simultaneously for 3 seconds until the LED flashes
blue and red 3 times.
3. Now the earbuds are restored back to factory
settings and ready to be paired again.
CHARGING
One full battery charge provides up to 6 hours of playing
time at maximum volume, and up to 9 hours at 40%
volume. When the battery is running low, you will hear a
“
BATTERY LOW ” voice prompt.

SAFETY RULES
Don’t disassemble or modify your earbuds for any
reason. Doing so may cause the earbuds to malfunction
or become combustible. Such damage to your device
can void the manufacturer’
s warranty.
Make sure the headset is completely dry before
damage.
charging. Charging a wet device may cause serious
Clean only with a dry cloth.
Avoid exposing TREBLAB xRun to extreme tempera-
tures (below 37°F / 3°C or above 112°F / 45°C). Extreme
temperatures can cause deformation of
xRun
components and reduce battery life and the lifespan of
your headset.
Don’t put the device's
LED lights close to humans’ or
animals’ eyes.
Do not use xRun during a thunderstorm.
Thunder-storms can cause serious malfunction and
increase the risk of electric shock.

RECYCLING
The earbuds can be recycled, and they should be in
order to keep our planet clean. Where should you bring
them?
In the
US , there are a couple of options:
1 . Best Buy has a recycling program. Just take the
broken earbuds with you next time you visit a
BestBuy
store.
This link will help you to find the best location:
https: //www.bestbuy.com/site/store-locator/
2.
Check for other possible locations next to you on these
websites (just enter your ZIP to find a location):
https: //search.earth911.com
https: //recyclenation.com/find
https: //www.cta.tech/Consumer-Resources/Green-
er-Gadgets
In
Canada , please visit the link below for help:
https: //thinkreuse.net
In UK , please visit the link below for help:
https: //www.recycle-more.co.uk/

SPECIFICATIONS
Battery
Charging time
Standby time
Wireless connection
version
Signal Range
Frequency response
Water resistance
Charging port
Up to 9 hours playing time (40%
volume)
Up to 6 hours (100% volume)
90mAh 3.7V, rechargeable Li-Ion
Input 5V / 1A
up to 2 hours
approx. 160 hours
5.0, HFP v1.7, A2DP v1.3, AVRCP
v1.5
33 ft / 10 m
20 Hz−2 KHz
IPX4
Micro-USB
THANK YOU
We truly appreciate that you chose TREBLAB as your
trusted brand of wireless earbuds and sincerely hope
you enjoy the great sound and seamless usability
TREBLAB xRun provides. We love making our customers
happy by providing true value with our products. If for any
reason you are not completely satisfied with your
purchase or have any questions, please visit
www.treblab.com and clicking Support gContact Us.
We care about our customers more than anything and are
always here to serve you.

xRun
R o H S
Made in China
1 YEAR WARRANTY
Parts and Labor Warranty.
Please visit www.treblab.com
to register YOUR product.
Manufactured by: Productech Corp
WIRELESS EARBUDS