TRENDnet TE100-MGBFX User manual

Switch
Switch
SFP
Media Converter
SFP Module
SFP Module
SFP Multi-Mode LC Module (2Km)
TE100-MGBFX
Quick Installation Guide
SFP Single-Mode LC Module (20Km)
TE100-MGBS20

TRENDnet
20675 Manhattan Place
Torrance, CA 90501
USA
Product Warranty Registration
Please take a moment to register your product online.
Go to TRENDnet’s website at:
www.trendnet.com/register
Technical Support
If you have any questions regarding the product installation,
please contact our Technical Support.
Toll free US/Canada: 1-866-845-3673
Regional phone numbers available at www.trendnet.com/support
Copyright © 2016. All Rights Reserved. TRENDnet.
Product Information:
Product Name:
Model Number:
Trade Name: TRENDnet
Technical Standards
TRENDnet, Inc.
20675 Manhattan Place
Torrance, CA 90501 USA
Manufacturer’s Name and Address
SFP Multi-Mode LC Module (2Km)
SFP Single-Mode LC Module (20Km)
Modèle:
Manufacturer’s Nom et Adre
Détails du produit
TRENDnet, Inc.
20675 Manhattan Place
Torrance, CA 90501 USA
Nom du produit:
Nom Commercial: TRENDnet
Technical Standards
Directives: EMC Directive 2004/108/EC and 2014/30/EU
RoHS Directive 2011/65/EU
REACH Regulation (EC) No. 1907/2006
This product is herewith confirmed to comply with the Directives.
Directives:
Ce produit est conforme à la directives suivante.
Directive CEM 2004/108/CE et 2014/30/UE
Directive RoHS 2011/65/UE
REACH Réglement (CE) N° 1907/2006
Person responsible for this declaration.
Date: August 9, 2016
Title: Director of Technology
Place of Issue: Torrance, California, USA
Name: Sonny Su
Signature:
Personne responsable de cette déclaration.
Date: Août 9, 2016 Lieu de délivrance: Torrance, California, USA
Nom: Sonny Su Position: Director of Technology
Signature:
Note:
1. For the TE100-MGBFX / TE100-MGBS20, the TX and RX cables must be reversed on the opposite fiber connection.
2. Cabling
Ÿ Multi-Mode Fiber Optic Cable: TE100-MGBFX
Ÿ Single-Mode Fiber Optic Cable: TE100-MGBS20
Remarque:
1. Pour le TE100-MGBFX / TE100-MGBS20 les câbles TX et RX doivent être inversés sur la connexion fibre opposée.
2. Câblage
Ÿ Câble optique multimode: TE100-MGBFX
Ÿ Câble optique monomode: TE100-MGBS20
Hinweis:
1. Bei TE100-MGBFX / TE100-MGBS20 müssen die Sende- (TX) und Empfangs- (RX) Kabel an der entgegengesetzten Glasfaserverbindung
vertauscht werden.
2. Kabel
ŸMultimodus-Glasfaserkabel: TE100-MGBFX
ŸEinzelmodus-Glasfaserkabel: TE100-MGBS20
Nota:
1. Para el TE100-MGBFX / TE100-MGBS20, los cables TX y RX se deben colocar al revés en la conexión de fibra contraria.
2. Cableado
Ÿ Cable de fibra óptica multimodo: TE100-MGBFX
Ÿ Cable de fibra óptica monomodo: TE100-MGBS20
Nota:
1. Para TE100-MGBFX / TE100-MGBS20, os cabos TX e RX têm de ser invertidos na conexão de fibra oposta.
2. Cabeamento
Ÿ Cabo Ótico Multi-modo: TE100-MGBFX
Ÿ Cabo Ótico Mono-modo: TE100-MGBS20
Nota:
1. Per i modelli TE100-MGBFX / TE100-MGBS20, i cavi TX e RX devono essere invertiti sulla connessione opposta in fibra.
2. Cablaggio
Ÿ Cavo in fibra ottica Multi-Modalità: TE100-MGBFX
Ÿ Cavo in fibra ottica Singola-Modalità: TE100-MGBS20
TE100-MGBFX
TE100-MGBS20
EN 55022: 2010+AC: 2011 Class B
EN 61000-3-2: 2014
EN 61000-3-3: 2013
AS/NZS CISPR 22: 2009+A1: 2010
Certifications
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received. Including
interference that may cause undesired operation.
Waste electrical an electronic products must not
be disposed of with household waste. Please
recycle where facilities exist. Check with your
Local Authority or Retailer for recycling advice.
Applies to PoE Products Only: This product is to be connected only
to PoE networks without routing to the outside plant.
Note
The Manufacturer is not responsible for any radio or TV interference
caused by unauthorized modifications to this equipment. Such
modifications could void the user’s authority to operate the
equipment.
Advertencia
En todos nuestros equipos se mencionan claramente las
caracteristicas del adaptador de alimentacón necesario para su
funcionamiento. El uso de un adaptador distinto al mencionado
puede producir daños fisicos y/o daños al equipo conectado. El
adaptador de alimentación debe operar con voltaje y frecuencia de la
energia electrica domiciliaria exitente en el pais o zona de
instalación.
Module LC multimode SFP (2Km)
Module LC monomode SFP (20Km)
TE100-MGBFX
TE100-MGBS20
EN 55022: 2010+AC: 2011 Class B
EN 61000-3-2: 2014
EN 61000-3-3: 2013
AS/NZS CISPR 22: 2009+A1: 2010