TRENDnet TPE-BE200 User manual

2-Port Gigabit PoE++ Extender
TPE-BE200 (v1.0R)
• Easy installation
• Extends 100m (328 ft.) for a total distance of up to 200m (656 ft.)
• Daisy chain up to 4 units for a total PoE network extension of up to 500m (1,640 ft.)
• Use a single PoE++ (60W) connection to extend PoE+ (30W) for up to two devices
• Supports PoE (15.4W), PoE+ (30W), and PoE++ (60W) devices
• Convenient wall mountable design
• No external power adapter required
TRENDnet’s 2-Port Gigabit PoE++ Extender, model TPE-BE200, takes a single PoE++ (60W) connection and extends it an
additional 100m (328 ft.) for up to two PoE+ (30W) devices. This dual/multi-port extender auto-detects a PoE (15.4W), PoE+ (30W),
or PoE++ (60W) input, and extends it for a total distance of up to 200m (656 ft.) from the PoE source. Daisy chain up to four
extenders for a total PoE network extension of up to 500m (1,640 ft.). This gigabit PoE++ range extender features a single PoE++
(60W) input port and two PoE+ (30W) output ports.
TPE-BE200

PoE++ Power
Extends a PoE++ connection up to 100m (328
ft.) to PoE (15.4W), PoE+ (30W), and PoE++
(60W) devices.
Gigabit Ports
One gigabit PoE++ input port and two gigabit
PoE+ output ports extend a single PoE++
connection an additional 100m (328 ft.) to two
PoE+ devices.
Daisy Chain
Connect up to four PoE++ extenders for a total
PoE network extension of up to 500m (1,640 ft.).
NETWORKING SOLUTION
TPE-BE200

FEATURES
SPECIFICATIONS
Standards
• IEEE 802.3
• IEEE 802.3u
• IEEE 802.3x
• IEEE 802.3ab
• IEEE 802.3az
• IEEE 802.3af
• IEEE 802.3at
• IEEE 802.3bt
Device Interface
• 1 x Gigabit PoE++ in port
• 2 x Gigabit PoE out port
• LED indicators
Data Transfer Rate
• Ethernet: 10Mbps (half duplex), 20Mbps (full
duplex)
• Fast Ethernet: 100Mbps (half duplex),
200Mbps (full duplex)
• Gigabit: 2000Mbps (full duplex)
Performance
• RAM buffer: 1Mb
• MAC Address Table: 2K entries
• Jumbo Frame: 9KB
Special Features
• Extends a PoE/PoE+ network connection an
additional 100 meters for a total distance of up
to 500m (1640 ft.)
• Cascade up to 4 repeaters
Power
• Powered by PoE++ Device
• Max. consumption: 3.3W
PoE
• PoE budget: 60W
• PD Pin: 1,2,4,5 (+) and 3,6,7,8 (-)
• PSE Pin: 1,2 (+) and 3,6 (-)
Operating Temperature
• 0° – 45° C (32° - 113° F)
Operating Humidity
• Max. 95% non-condensing
Dimensions
• 110 x 70 x 29mm (4.3 x 2.8 x 1.1 in.)
Weight
• 125g (4 oz.)
Certifications
• CE
• FCC
Warranty
• 3 year
Package Contents
• TPE-BE200
• Quick Installation Guide
Extension Distance
Extends a PoE/PoE+/PoE++ network
connection an additional 100m (328
ft.) for a total distance of up to 200m
(656 ft.) from the PoE source
PoE/PoE+/PoE++
Supports PoE (15.4W), PoE+ (30W),
and PoE++ (60W) network
connections
Daisy Chain
Connect up to 4 PoE++ extenders for
a PoE network extension of up to
500m (1,640 ft.)
Installation Flexibility
Wall mountable design accommodates
most installations scenarios
PoE Powered
No external power required—the
PoE++ extender (sometimes referred
to as a PoE++ repeater) is
conveniently powered via Power over
Ethernet
20675 Manhattan Place • Torrance • CA 90501 • USA • T: 1-888-326-6061 • F: 1-310-961-5511 • [email protected] • www.TRENDnet.com
TRENDnet is a registered trademark. Other Brands and product names are trademarks of their respective holders. Information provided in this document pertain to TRENDnet products and is subject to change at
any time, without notice. For the most recent product information please visit http://www.trendnet.com. Copyright © TRENDnet. All Rights Reserved.
Updated: 6/9/2022
TPE-BE200
All references to speed are for comparison purposes only. Product specifications, size, and shape are subject to change without notice, and actual product appearance may differ from that depicted herein.