TRENDnet TFC-1000MSC D1 User manual

TFC-1000MSC(D1)
Quick Installation Guide

Table of Contents
1 English
1. Before You Start
2. Hardware Installation
3. LEDs and DIP Switches

1. Before You Start
Package Contents
ŸTFC-1000MSC
ŸQuick Installation Guide
ŸPower Adapter (5V DC, 1A)
Environmental Requirements
ŸOperating Temperature: 0 – 40 °C (32 – 104 °F)
ŸStorage Temperature: -25 – 70 °C (-13 – 158 °F)
ŸHumidity: Max. 90% (non-condensing)
1
Note: Environment must be free from strong electromagnetic field
generators (such as motors), vibration, dust and direct exposure to
sunlight.
Minimum Requirement
ŸSturdy, level surface that can support the weight of the fiber
converter
ŸGigabit network device or appliance
ŸMulti-Mode SC duplex type fiber cable
ŸCat.5e or Cat.6 RJ-45 network cable
Optional Equipment
ŸTFC-1600 chassis

2. Hardware Installation
Installing Two Stand Alone TFC-1000MSC Fiber Converters
2
1. Connect a network cable from a Gigabit port of the TFC-1000MSC to
a Gigabit port on your switch (e.g. TEG-S24Dg, TEG-S16Dg).
2. Connect the two fiber converters with a fiber cable.
Note: The TX cable of one fiber converter must be plugged into the RX
port of the second converter.
Converter 1 Converter 2
Converter 2
Converter 1

3
Installing a TFC-1000MSC in a TFC-1600 Chassis
1. Unscrew the bay cover from the desired bay on the chassis.
2. Remove the TFC-1000MSC by unscrewing the thumbscrew and
pulling the unit away from the metal casing.
3. Supply power by connecting the included adapter to the back of
each fiber converter and plug into an outlet.

4
4. Connect a network cable from the Gigabit port of the fiber converter
to a Gigabit port on your switch. From here, you can connect to
another fiber converter or any device with a Gigabit port and fiber
port.
3. Slide the Fiber Converter into an available slot and fasten the
thumbscrew.
Note: When connecting two fiber converters, the TX cable of one fiber
converter must be plugged into the RX port of the second converter.
3. LEDs and DIP Switches
Color
Green Blinking
Sequence Function
Power
TX LINK / ACT
Green
Off
Green
Off
Solid
Powered Off
Solid Powered On
Ethernet Connection
Data transmission
No Link
LED
N/A
N/A
LEDs
Green Blinking
Off
Green Solid Fiber Connection
Data transmission
No Link
N/A
FX LINK / ACT

5
Note:
1. DIP switch settings can be changed at any time. Users can either (1)
unplug the power supply, change the DIP switch settings, and plug
in the power supply; or (2) change the DIP switch settings and
power cycle the device.
2. The default setting on Dip Switch 2 is set to “Off” (Auto-Negotiation)
position. Put in “On” position only when the other end of the fiber
converter is required to use Force mode.
3. LLCF stands for Link Loss Carry Forward. To use this function, both
sides of the fiber converter must support LLCF function. Only enable
LLCF function in one of the fiber converters. When one side of the
Ethernet TX cable loses signal, the LED on that unit will turn off (the
other unit's Ethernet TX LED will remain lit). When one unit's Fiber
TX or RX is lost, the FX LED on both units will shut off. The
connected device may changed LED behavior.
2
1
Off
Off
Action
On
Function
LLCF Disable
On
Switch
LLCF Enable
Fiber Forced Mode
Fiber Auto-Negotiation
Dip Switches

Directives: Low Voltage Directive 2006/95/EC and 2014/35/EU
EMC Directive 2004/108/EC
RoHS Directive 2011/65/EU
REACH Regulation (EC) No. 1907/2006
TRENDnet hereby declares that the product is in compliance with the essential requirements
and other relevant provisions under our sole responsibility.
This product is herewith confirmed to comply with the Directives.
Product Information
Product Name:
Model Number: TFC-1000MSC
Trade Name: TRENDnet
Intelligent 1000Base-T to 1000Base-SX Multi-Mode SC Fiber Converter
Safety EN 60950-1: 2006 + A11: 2009 + A1: 2010 + A12: 2011 + A2: 2013
EMC EN 55022: 2010 + AC: 2011 Class A
EN 61000-3-2: 2006 + A1: 2009 + A2: 2009
EN 61000-3-3: 2013
EN 55024: 2010
Person responsible for this declaration.
Signature:
Date: March 29, 2019
Title: Director of Technology
Name: Sonny Su
Place of Issue: Torrance, California, USA
Manufacturer’s Name and Address
TRENDnet, Inc.
20675 Manhattan Place
Torrance, CA 90501 USA
Zwolsestraat 156 2587 WB
The Hague The Netherlands

Certifications
This device complies with Part 15 of the FCC
Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful
interference.
(2) This device must accept any interference
received. Including interference that may
cause undesired operation.
Waste electrical an electronic
products must not be disposed of
with household waste. Please
recycle where facilities exist.
Check with your Local Authority or
Retailer for recycling advice.
Copyright © 2019. All Rights Reserved. TRENDnet.
TRENDnet
20675 Manhattan Place
Torrance, CA 90501
USA
Applies to PoE Products Only: This product is to
be connected only to PoE networks without
routing to the outside plant.
Note
The Manufacturer is not responsible for any
radio or TV interference caused by unauthorized
modifications to this e quipm ent. Such
modifications could void the user’s authority to
operate the equipment.
Advertencia
En todos nuestros equipos se mencionan
claramente las caracteristicas del adaptador de
alimentacón necesario para su funcionamiento.
El uso de un adaptador distinto al mencionado
puede producir daños fisicos y/o daños al equipo
conectado. El adaptador de alimentación debe
operar con voltaje y frecuencia de la energia
electrica domiciliaria exitente en el pais o zona
de instalación.
Product Warranty Registration
Please take a moment to register your
product online. Go to TRENDnet’s website at:
www.trendnet.com/register
Technical Support
If you have any questions regarding the product
installation, please contact our Technical Support.
Toll free US/Canada: 1-866-845-3673
Regional phone numbers available
at www.trendnet.com/support
TFC-1000MSC (D1) / 3.29.2019