TRENDnet TFM-560X - DATA SHEETS User manual

TFM-560X
YO.13
Quick Installation Guide

Table of Contents
Version 06.08.2011
English 1
1. Before You Start
2. How to Install 2
1
Troubleshooting 6

1. Before You Start
Ÿ
ŸRS-232 COM port
ŸHard Drive Space: 4MB or above
CD-ROM Drive
Package Contents
Ÿ
ŸCD-ROM (Driver & User’s Guide)
ŸMulti-Language Quick Installation Guide
Ÿ1 x RJ-11 Telephone Cable
Ÿ1 x RS-232 Serial Cable
ŸPower Adapter (9V AC, 1A)
TFM-560X
System Requirements
1
CPU Memory
Windows Vista (32/64-bit)
Windows 7 (32/64-bit)
Windows XP (32/64-bit) / 2000 /
ME / 98SE
800MHz or above
1GHz or above
300MHz or above
512MB RAM or above
1GB RAM or above
256MB RAM or above
Supported Operating Systems

2
2. How to Install
Note:
1.Refer to the User's Guide on the Driver CD-ROM for Windows 98SE and Windows
ME installation instructions
3. Click Install Driver. Then select your operating
system.
1. Insert Driver CD-ROM into your computer's
CD-ROM drive.
4. Click OK.
5. Click Exit to close the installation window.
2. Click Run Autorun.exe (Windws 7/Vista only).

3
6. Shutdown your computer.
7. Plug the male end of the RS-232 cable into the
TFM-560X. Then plug the female end of the
RS-232 cable into your computer's COM port.
8. Plug one end of a RJ-11 telephone cable into the
LINE port on the Modem, and then connect the
other end into the telephone jack.
9. Connect the Power Adapter to the Modem and
then to a power outlet.
10. Turn on the modem.
11. Connect your telephone into the PHONE port
(optional).
12. Turn on the PC.

4
13. Click Locate and install driver software
(recommended).
14. Click Install this driver software anyway.
Note: Driver installation for Windows Vista is now complete.
Windows Vista
Windows XP
15. Select No, not this time and then click Next.
Note:
For Windows 7/2000 drivers will install automatically. Driver installation for Windows
7/2000 is now complete. For Windows Vista, continue on to step 13. For Windows XP,
continue on to step 15.

5
17. Select the Windows XP drivers and then click
Next.
18. Click Continue Anyways.
19. Click Finish.
Note: Driver installation for Windows XP is now complete.
16. Select Install the software automatically
(Recommended) and then click Next.

1. I inserted the Driver CD-ROM into my computer's CD-ROM Drive but the installation menu
does not appear automatically. What should I do?
1.For Windows 7, if the installation menu does not appear automatically, click on the Windows
Icon on the bottom left hand corner of the screen,, click the “Search programs and files” box,
and type D:\Autorun.exe, where “D” in “D:\Autorun.exe” is the letter assigned to your
CD-ROM Drive, and then press the ENTER key on your keyboard.
2.For Windows Vista, if the installation menu does not appear automatically, click Start, click
the Start Search box, and type D:\Autorun.exe where "D" in "D:\Autorun.exe" is the letter
assigned to your CD-ROM Drive, and then press the ENTER key on your keyboard.
3.For Windows XP/2000, if the window does not appear automatically, click Start, click Run
and type D:\Autorun.exe where “D” in “D:\Autorun.exe” is the letter assigned to your
CD-ROM Drive, and then press the ENTER key on your keyboard.
2. I connected the modem to my computer's COM/RS-232 port and my computer does not
detect the modem? What should I do?
3. After successful installation of the TFM-560X, I tried to connect to the Internet but I do not
get a dial tone. What should I do?
1. Unplug the telephone wire from the computer, and check for a dial tone by connecting the
telephone cable directly from the wall outlet to a telephone. If there is no dial tone, then the
problem is in your telephone cable or telephone system. Call your telephone service provider
for assistance. If there is a dial tone, reconnect cables to the modem and verify that the
telephone cable is securely connected to the modem and phone jack.
2. Make sure you are connecting the modem into an analog phone connection. The modem will
not work with a digital phone line.
3. Contact your ISP and verify all the information that you have in regards to your Internet
connection settings is correct.
4. How do I install the drivers on Windows 98SE or ME?
Please refer to the User's Guide included on the Driver CD-ROM.
5. Do I need to install the Modem on Hold or Classic Phone Tools software programs?
The Modem on Hold or Classic Phone Tools software programs are not required to operate the
modem. To use Modem on Hold or Classic Phone Tools, open the program and click on the
Help button.
If you still encounter problems or have any questions regarding the TFM-560X please contact
TRENDnet's Technical Support Department.
1. Make sure the computer meets the minimum system requirements as shown at the
beginning of this quick installation guide.
2. Verify that the modem is properly connected to the computer's RS-232 port.
3. Try connecting the modem into a different RS-232 port.
Troubleshooting
6

( 01) 07898431241061

Copyright ©2011, All Rights Reserved. TRENDnet.