TRENDnet TEW-603PI User manual

TEW-603PI
Version 09.15.2005
Quick Installation Guide
Copyright ©2005. All Rights Reserved. TRENDnet.

Table of Contents
1
1
2
5
6
11
12
12
13
16
17
22
23
English .................................................................................
Troubleshooting......................................................................
1. Prepare for Installation ..................................................
2. Install Wireless Configuration Utility .............................
3. Install Hardware ............................................................
4. Install Drivers ................................................................
5. Wireless Configuration ..................................................
1. Pregatiti-va de instalare ................................................
2. Instalarea programului Wireless Configuration Utility ...
3. Instalare fizica ...............................................................
4. Instalare drivere ............................................................
5. Configurarea Wireless ..................................................
Româna ...............................................................................

Thank you for purchasing the TEW-603PI. Your new wireless network adapter
will allow you to share the Internet, files, or other resources by connecting you
to an 802.11g or 802.11b wireless network. This guide will help you setup and
configure your wireless card. Following the installation instructions should be
quick and easy. If you run into problems, please refer to the Troubleshooting
section or the more detailed installation procedures on the User's Guide CD-
ROM. If you need further technical support, please visit www.TRENDNET.com
or call by phone.
Verify Package Contents
Please make sure you have everything in the box:
1
1. Prepare for Installation
English
English
User’s Guide CD-ROM Quick Installation Guide
TEW-603PI
Verify Equipment
Before installing this PCI Adapter, you should have a:
1. Pentium class desktop computers with at least one available PCI slot
2. Microsoft Windows 2000 or XP
3. CD-ROM drive
Important! DO NOT install the PCI adapter in the computer until instructed to
do so. Please follow the instructions in Section 2 before installing the adapter
into your computer.
TEW-603PI
Version 09.15.2005
Quick Installation Guide
Copyright ©2005. All Rights Reserved. TRENDnet.

2English
1. Insert the TEW-603PI CD-ROM into your computer's CD-ROM
drive; the installation menu will appear automatically. If the window does not
appear automatically, click Start, click Run, and type E:\Autorun.exe in the
text-field. Click OK to start the installation.
2. Install Wireless Configuration Utility
2. On the Installation Menu, click Install Utility.
3. Click Next.
NOTE: Replace “E” in “E:\Autorun.exe” with whichever letter is assigned
to your CD-ROM drive.
Windows 2000/XP

3English
4. Click Next.
5. Click Install.

4English
6. A warning message will tell you that the device you're installing has not yet
been certified for Windows XP compatibility. Click Continue Anyway. For
Windows 2000, click Yes.
7. Click Finish.

5English
3. Install Hardware
If you are installing the TEW-603PI Wireless PCI Card:
Proceed only if you have already completed the steps in Section 2
1. Shut down your computer.
2. Open your computer case to reveal the motherboard and expansion slots.
(Please refer to your computer's user manual if you need help opening the
case)
3. Insert the wireless card into one of the motherboard's free PCI slots. Press
down firmly and evenly on the card until it snaps into place.
4. Screw the PCI Card's metal bracket into your case with a standard bracket
screw. Attach the included antenna to the connector on the back of your
card.
5. Close your computer case, and reboot your computer.

6English
4. Install Drivers
Windows 2000
1. Click Next.
2. Select Search for a suitable driver for my device (recommended) and
click Next.

7English
3. Click Next.
4. Click Next.

8English
6. Click Finish.
7. Continue to Section 5 of this Quick Installation Guide to continue configuring
your wireless card.
5. After rebooting your computer, a message will tell you that the driver you are
about to install “does not contain a digital signature” and will ask you if you
want to continue the installation. Click Yes.

9English
Windows XP
1. After your computer reboots, the “Found New Hardware Wizard” will appear.
Select Install the software automatically and click Next.
2. A warning message will tell you that the device you're installing has not yet
been certified for Windows XP compatibility. Click Continue Anyway.

10 English
3. Click Finish.
4. Continue to Section 5 of this Quick Installation Guide to continue configuring
your wireless card.

11 English
5. Wireless Configuration
1. Double-click the wireless computer icon in your system tray (next to the
clock in the bottom right corner of your screen).
2. Click Site Survey, click Refresh, and select the desired access point. Click
Connect.
3. Click OK.
4. Please verify your connection status.
Congratulations! Installation is now complete.

12
Verificati continutul pachetului
Verificati echipamentul
Va rugam sa va asigurati ca aveti totul in cutie:
Inaintea de a instala aceasta placa PCI, ar trebui sa aveti urmatoarele:
1. Computere de birou clasa Pentium cu cel putin un slot PCI liber
2. Microsoft Windows XP sau 2K
3. Unitate CD-ROM
Important! NU instalati placa PCI in computer pana cand nu vi se da
instructiunea de a face acest lucru. Va rugam sa urmati instructiunile din
Sectiunea 2 inaintea instalarii adaptorului in computerul dumneavoastra.
CD-ROM
Ghid de utilizare Ghid rapid de instalare
TEW-603PI
Româna
1. Pregatiti-va de instalare
Româna
TEW-603PI
Version 09.15.2005
Quick Installation Guide
Copyright ©2005. All Rights Reserved. TRENDnet.

13
2. Instalarea programului Wireless
Configuration Utility
1. Introduceti CD-ul TEW-603PI in unitatea CD-ROM din computer; meniul de
instalare va apare automat. Daca fereastra nu apare automat, click pe Start,
click pe Run si scrieti E:\Autorun.exe in campul de text. Click pe OK pentru
a porni instalarea.
2. La meniul de instalare, click pe Install Utility.
3. Click pe Next.
Nota: Inlocuiti “E” din “E:\Autorun.exe” cu litera care desemneaza
unitatea dumneavoastra de CD-ROM.
Windows 2000/XP SP2
Româna

14
4. Click pe Next.
5. Click pe Install.
Româna

15
7. Click pe Finish.
6. Un mesaj de avertizare va va spune ca dispozitivul pe care il instalati nu a
fost inca certificat pentru compatibilitate cu Windows XP. Click pe Continue
Anyway. Pentru Windows 2000, click pe Yes.
Româna

16
3. Instalare fizica
Daca instalati placa PCI 603PI Wireless:
Continuati doar daca ati completat deja pasii din Sectiunea 2
1. Inchideti computerul.
2. Deschideti carcasa computerului pentru a avea acces la placa de baza si la
sloturile de extensie. (Varugam sa cititi manualul de utilizare al computerului
daca aveti nevoie de ajutor in deschiderea carcasei)
3. Introduceti placa wireless intr-unul din sloturile PCI libere de pe placa de
baza. Apasati in jos ferm si in mod egal pe placa pana cand aceasta se
fixeaza in loc.
4. Insurubati placheta metalica a placii PCI pe carcasa cu un surub standard.
Atasati antena inclusa la conectorul de pe spatele placii.
5. Inchideti carcasa computerului si reporniti computerul.
Româna

17
4. Instalare drivere
Windows 2000
1. Click pe Next.
2. Selectati Search for a suitable driver for my device (recommended) si
dati click pe Next.
Româna

18
3. Click pe Next.
4. Click pe Next.
Româna