TRENDnet TPE-101I User manual

TRENDnet’s TPE-101I Power over Ethernet Injector provides
an innovative and cost effective solution to a variety of
Ethernet devices such as VoIP phones or Wireless Access
Points. Reduce costs by using existing CAT5 cable to deliver
both power and data where power source is difficult to obtain.
TPE-101I
Power over Ethernet (PoE) Injector
FEATURES
IEEE 802.3af Power over Ethernet (PoE)
Standard Compliant
Reduce Cabling for Wireless APs, IP Phone and
any IEEE 802.3af Powered Device (PD)
Supplies Power to PD up to 15.4 watts per
Automatically detecting PoE Terminals and
Supplying Inline Power
Advanced Auto-Sensing Algorithm Giving Power
only to 802.3af end device
High Safety Standards with Short Circuit
Protection
Auto Disconnection for Over Voltage or Under
Voltage Situation
Supports Power Detection and Classification
5-Year Warranty
TPE-101I (02-07-2005)
TRENDnet
TRENDware, USA
What's Next in Networking

RELATED PRODUCT
To Order Please Call:
1-888-326-6061
TPE-102S: Power over Ethernet (PoE) Splitter
TPE-S88: 16-Port 10/100Mbps Web Smart PoE Switch
NETWORKING SOLUTIONS
SPECIFICATIONS
TRENDnet is a registered trademark of TRENDware International, Inc. Other Brands and product names are trademarks of their respective holders. Information provided in this
document pertain to TRENDware products and is subject to change at any time, without notice. For the most recent product information please visit ____________________
http://www.TRENDNET.com.
©
Copyright TRENDware International, Inc. 2005. All Rights Reserved.
TRENDware International, Inc.
3135 Kashiwa Street
Torrance, CA. 90505. USA
Tel: [phone]
Fax: [phone]
Web:
Email: [email protected]
www.TRENDNET.com
ORDERING INFORMATION
TRENDnet
TRENDware, USA
R
TPE-101I
TPE-101I
Power over Ethernet (PoE) Injector
Power over Ethernet (PoE) Injector
Diagnostic LEDs:
Power (Green)
Power Good (Green)
Power Consumption:
24 watts (max)
Temperature:
Operation: 0 ° C~40 ° C (32 ° F~ ° F)
Storage: -10 ° C~70 ° C ( ° F~ ° F)
Humidity:
10%- 90% (non-condensing)
Dimensions (LxWxH):
87 x 85 x 24mm (3.425 x 3.35 x 0.95 inches)
Weight:
156g (0.35 lb)
Certifications:
FCC, CE
•
•
•
•
•
•
•
•
•
Hardware
Standard:
IEEE 802.3 10Base-T
IEEE802.3u 100Base-TX
IEEE 802.3af Power Over Ethernet
Network Media:
10Mbps: Cat 3,4,5 Unshielded/Shielded/Screened Cable
100Mbps: Cat 5, 5E, 6 Unshielded/Shielded/Screened Cable
Protocol:
CSMA/CD
Topology:
Star
Ports:
1 x DATA-IN Port (Data only)
1 x POE-OUT Port (Data + Power)
Power:
Input: 48V 0.5A
Output: Class 0, 48V DC @ 15.4 watts ; Class 1, 48V DC @ 4
watts; Class 2, 48V DC @ 7 watts ; Class 3, 48V DC @ 15.4 watts
•
•
•
•
•
•
•
•
•
•
•
(TPE-101I)
Power over Ethernet Injector
Power over Ethernet Splitter
(TPE-102S)
(TPE-S88)
48VDC Power +
Ethernet Data
5VDC Power
Ethernet Data
(TPE-101I)
Power over Ethernet Injector
48VDC Power + Ethernet Data
48VDC Power
Ethernet Data
48VDC Power
5VDC Power
Ethernet Data
48VDC Power + Ethernet Data
Ethernet Data
48VDC Power
Powered Device which
uses 5V Power Input
(Wireless AP, Camera, etc)
Power
Jack
16-Port PoE and
10/100Mbps Web Smart Switch
48VDC Power
Ethernet Data
48VDC Power + Ethernet Data
Powered Device with
PoE Support
(TPE-S88)
16-Port PoE and
10/100Mbps Web Smart Switch
Ethernet Ports
Ethernet Ports
Power
Jack