TRENDnet TV-IP662PI User manual

TRENDnet User’s Guide
Cover Page

© Copyright 2014 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
Table of Contents
i
Contents
Product Overview .................................................................................2
Package Contents .......................................................................................................... 2
Features ......................................................................................................................... 2
Product Hardware Features........................................................................................... 3
Wall mount installation ................................................................................................. 4
Power over Ethernet (PoE) Injector............................................................................... 4
Using the Autorun Wizard .....................................................................5
Mobile Apps........................................................................................ 10
Setup Wizard (Finding IP address of the cameras)................................11
Web Browser Management................................................................. 14
Main Web User Interface ............................................................................................ 16
Setup............................................................................................................................ 18
Wizard.......................................................................................................................... 18
Step 1: LAN Settings ................................................................................................ 19
Step 2: Internet Settings ......................................................................................... 19
Step 3: DDNS Settings ............................................................................................. 19
Step 4: Camera Name Settings................................................................................ 20
Step 5: Time Settings............................................................................................... 20
System ......................................................................................................................... 22
Admin...................................................................................................................... 23
Time and Date ......................................................................................................... 24
Network ....................................................................................................................... 25
Network .................................................................................................................. 26
Dynamic DNS........................................................................................................... 27
Audio /Video................................................................................................................ 27
Audio and Video.......................................................................................................28
Image Setup .............................................................................................................30
Action .......................................................................................................................... 30
Recording .................................................................................................................31
Video Clip .................................................................................................................34
Snapshot ..................................................................................................................36
Preset Position .........................................................................................................39
SD Management ......................................................................................................40
Motion Detection ........................................................................................................ 40
Sound Detection .......................................................................................................... 41
Tools ............................................................................................................................ 41
System......................................................................................................................42
Firmware Update .....................................................................................................42
Advanced ..................................................................................................................... 43
Device Info ...............................................................................................................43
Log............................................................................................................................43
TRENDnetVIEW Pro Software.............................................................. 44
How to setup/access the camera remotely.......................................... 45
Troubleshooting ................................................................................. 48

© Copyright 2014 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TV-IP662PI
2
Product Overview
TV-IP662PI
Package Contents
TV-IP662PI
Multi-Language Quick Installation Guide
CD-ROM (Utility & User’s Guide)
Network cable (1.8m / 6ft)
Power adapter (12V DC, 1A)
Camera Mounting Kit
If any package contents are missing or damaged, please contact the retail store, online
retailer, or reseller/distributor that the item was purchased.
Features
The Megapixel PoE Day/Night PTZ Network Camera, model TV-IP662PI, provides day and
night monitoring over a large area. Pan and tilt the camera from a mobile device, record
video to a Micro SD Card, and have camera email motion detection video clips. A
wall/ceiling mounting kit is included and the camera’s off white housing blends into
most environments
Megapixel Video
Experience Megapixel 720p HD video with H.264 video compression
Night Vision
Night vision up to 7.5 meters (25 ft.) in complete darkness (indoor rating)
Dynamic DNS
Support for Dyn.com and NO-IP.com dynamic DNS service providers
PoE
No need to install this camera near a power source, power and data are received
through a single Ethernet cable
PTZ
Pan, tilt, and zoom the camera from a mobile device
Preset Auto-Patrol
Define preset PTZ auto-patrol points
Digital Zoom
Zoom in by a factor of four
Motion and Sound Detection Emails
Receive email snapshots and video clips triggered by motion and sound
Mounting Hardware
Mounting bracket supports ceiling installation
Two-Way Audio
Built-in microphone and connect a third party speaker for two-way audio
Storage
Store video to a Micro SD card (up to 32 GB) or to a Samba server

© Copyright 2014 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TV-IP662PI
3
Product Hardware Features
Front Panel View
Light Sensor: Detects the light source to turn IR on or off.
Focus Ring: Turn to adjust the focus of the camera.
Microphone: Built-in microphone for audio can be turned on or off.
IR LED –Built-in 6 IR LED for night vision uses.
Camera Lens: Focal Length: 4.6 mm, F2.0; Focal Depth: 20 cm –infinity
Power/Link LED: This LED indicator is solid blue when your camera is powered
on. If this LED indicator is off, there is no power to your camera. This LED
indicator is blinking green when there is connection/data to your camera.
Rear Panel View
Micro SD Slot –Insert a micro SD card into this slot to store video/image data.
Reset Button –Use an item such as a paperclip to push and hold this button for
6 seconds and release to reset your camera to its factory defaults.
Power Port –Connect the included power adapter from your camera to an
available power outlet. Note: Use only the adapter that came with your
camera.
Speaker Port –Connects an external active speaker.
Air Vent –This is to cool the camera.
PoE / Ethernet Port –Connect Ethernet cables to your wired network devices.

© Copyright 2014 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TV-IP662PI
4
Wall mount installation
Please do not mount the camera until after you complete the installation steps from the
CD-ROM. Temporarily place the camera next to your computer.
To attach the metal plates carry out the following:
Remove the two rubber pads under the base of the Camera.
Slide the metal plate onto the base of the camera, making sure that the two
holes on the base of the camera align with the two screw holes on the base of
the camera.
Secure the metal plate to the base of the Camera with the two screws
provided.
The camera can now be mounted to the ceiling or a wall. See the diagram
below for more information.
Power over Ethernet (PoE) Injector
A Power over Ethernet (PoE) Injector (sold separately) is designed to supply power to
PoE Access Points, TV-IP662PIs or other PoE Powered Devices (PDs) through the
Ethernet cable. We recommend the TRENDnet TPE-113GI Gigabit Power over Ethernet
(PoE) injector. This product is sold separately. More details are available on the
TRENDnet web site.
To setup a TRENDnet PoE injector (TPE-113GI) with the TV-IP662PI, connect one end of
an ordinary RJ45 cable to the PoE port at the back of the injector, and the other end of
the Ethernet cable to the TV-IP662PI.
Wait for the camera to generate power from the PoE injector, the LED at the front of the
camera will blink green when power is delivered. If you are not getting power from the
injector, please check your equipment or read the PoE injector user manual.

© Copyright 2014 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TV-IP662PI
5
To setup a TRENDnet PoE switch (TPE-S80, sold separately) with the TV-IP662PI, connect
one end of an ordinary Etherenet cable to one of the PoE ports, and the other end to
the Ethernet port at the back of the camera.
As the image displays, connect the power cord to your TPE-S80. Then connect your TV-
IP662PI to one of the PoE ports. Connect your computer to one of the non-PoE ports.
Using the Autorun Wizard
The Autorun supports both Windows & Mac operating systems. Insert the Installation
CD-ROM into your computer’s CD-ROM drive to initiate the Autorun program. The
Autorun Wizard program will run automatically.
For Windows users: If the autorun wizard does not run, go to the CD-ROM folder and
run Autorun.exe to start installation wizard.
For Mac users: Please click InstallWizard to start installation wizard.

© Copyright 2014 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TV-IP662PI
6
Begin by selecting a language from the drop-down list. There is a choice of five
languages –English, French, German, Spanish, and Russian.
1. Click Install Camera and follow the on-screen steps to continue the installation.
2. This step references information on the camera itself. Go to your camera and
check the details at the bottom of the device. Click Next to continue, Back to go
to the previous screen or Home to return to the main menu.
3. Follow the instructions in the next screen to Power up the Camera. Connect
one end of the power adapter to the camera and watch the LED flicker. Click
Next to continue.

© Copyright 2014 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TV-IP662PI
7
4. Connect one end of the network cable to your camera and the other end to
your router. Click Next to continue.
5. The wizard will search the network for your camera.
6. If you only have one camera on your network, the wizard will automatically
select it. Otherwise, if you have more than one camera, it will provide several
options from the list. The wizard provides the Model Name and MAC Address
of the camera. If you do not see any of your camera(s) in the wizard, click Retry
to scan for the camera again. Click Next to continue.

© Copyright 2014 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TV-IP662PI
8
7. Password Settings. The default username and password is admin. Tick the
Change Password checkbox to enter the new password details. The password
should be between 8 and 30 characters. Click Next to continue.
If you have entered the incorrect admin details, you are prompted to change
the configuration, as shown below.
If the password length is less than 8 characters, you will also be prompted to
alter the configuration, as shown below.
8. The wizard will configure your parameters.

© Copyright 2014 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TV-IP662PI
9
9. The initial setup is complete. Click the link to navigate to the camera’s Web or
click the product images to create a shortcut on your desktop for future access.
Click Next to continue to the next step.
10. Scan the barcode to download the TRENDnetVIEW App for Apple iOS or
Android™1devices. The app can also be found by searching TRENDnet from the
Apple App Store or Google Play™2.
Please refer to the Mobile Apps section for additional app features
information.
You are now ready to use your camera. Click Finish to exit.
1Android is a trademark of Google Inc.
2Google Play is a trademark of Google Inc.

© Copyright 2014 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TV-IP662PI
10
Mobile Apps
Using your mobile3device, in this example it is an Android phone, touch the Bar Code
scanning app on your phone. Hold it up to the QR Code on the wizard that reads,
Android, and scan the image. The Bar Code app will read the QR Code and record it.
The app will copy the QR link and provides a HTML link to the TRENDnet app. You will be
directed to the Google Play™ Storefront to download the app. Download the app,
install it and use the app on your mobile device to view the TRENDnet camera.
3Please refer to Quick Installation Guide that included in the CD-ROM to install the
mobile applications or learn how to use mobile accessibility.
Here is Apple iTunes version
Scan the QR Code using one of IOS’s QR Code apps. The app will automatically create an
HTML link to the iTunes App Store. You will be immediately directed to the iTunes App
Store. Click the link to download.

© Copyright 2014 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TV-IP662PI
11
Setup Wizard (Finding IP address of the cameras)
To locate the IP address of your camera(s) on the same network with your PC, please
install the Setup Wizard utility (for Windows only) from the SetupWizard folder .
1. Insert the included CD-ROM into your CD/DVD drive, browse to the CD drive
of the SetupWizard folder and run SetupWizardSetup_1.2.3.4804.msi to
begin the installation wizard.
2. The following screen will show up. Click Next and following the screen to
finish the installation.
3. Click Close to finish the installation.
4. Click Start > Programs > TRENDnet > SetupWizard > SetupWizard. The
TRENDnet Setup Wizard appears.
5. Connect an RJ-45 cable from a switch/router to the Ethernet port on the back
of the camera and connect the AC power adapter to the camera. Click Next to
proceed.
6. From the list of cameras that appears, select the camera and click Next to
continue. If your camera is not listed, please ensure your camera is powered on
and connected to the network then click Re-Scan to scan the camera from
your network.

© Copyright 2014 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TV-IP662PI
12
7. Login to your camera by entering the ID and Password. By default, both the ID
and Password are set to admin. Click Next to continue.
8. It is strongly recommended that you change your password to secure the
camera from being accessed by others. Check the Change Password box and
enter the new password in both password fields to confirm the new password.
Click Next to continue.
9. Enter a camera name, date and time. The name will be used to identify
your camera on the network. If your camera is in the same time zone as the
computer you are using, click the Copy Local Time icon to copy the local
time to the camera. Click Next to continue.
10. Select a connection option and click Next to continue.
PPPoE: Select this option if your camera is directly connected to a DSL modem
and your ISP requires a PPPoE authentication to the Internet.
DHCP: Select this option if your camera is connected to a router and DHCP is
enabled.
Fixed IP: Select this option if your wish to connected the camera via a fixed IP.

© Copyright 2014 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TV-IP662PI
13
11. A summary screen of the settings you have chosen appears. Click Next to
continue.
12. After the Setup Wizard configures the camera, the wizard starts to setup
process.
13. When the Setup Wizard has finished, the configuration is complete and the
following screen appears:

© Copyright 2014 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TV-IP662PI
14
Web Browser Management
After completing the Autorun Wizard from the CD, you are ready to use your camera.
The camera’s built-in Web configuration utility is designed to allow you to easily access
and configure your TV-IP662PI camera. Open a web browser such as Internet Explorer®
and enter the IP address of your camera (through the setup wizard utility software on
the CD). To log in, type the Username admin and the password you created in the
Autorun Wizard. If you did not create a password or you just press the reset button for
reset, the default password is admin. After entering your password, click OK.
Note: By default, this camera obtains an IP address from a DHCP server on the local
network. To find the IP address of the camera, consult the DHCP client list on the DHCP
server on your wireless router or install the Setup Wizard utility software from CD.
However, if there is no DHCP server available, the static default IP address of this
camera is 192.168.10.30, in case you are connecting the camera directly with your PC
without another device in-between.
To log in, type the Username admin and the password you created in the Setup Wizard.
If you did not create a password, the default password is admin. After entering your
password, click OK.
For Internet Explore Web Browser
After you have logged in, Internet Explorer will prompt you to install the camera add-on
required. Click Allow to install the add-on.
After the add-on was successfully installed, the Live View video feed will be displayed.

© Copyright 2014 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TV-IP662PI
15
For Non-Internet Explore Web Browser
After you have logged in, you need to install the required plug-in. Click the link below
the camera view finder to install the plug-in. Download the plug-in to a folder on the
local PC and run the download plug-in file.
Click Next to continue.
Note: Please ensure all browsers are closed during the installation.
Click Close to finish the installation.

© Copyright 2014 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TV-IP662PI
16
Main Web User Interface
After successfully logging into the Web User Interface of the camera, the following
window will appear.
The following table describes all the icons and settings that can be configured on the
Live View page:
Icon
Description
Click this button to view the live video feedback of this
camera.
Click this button to access the setup pages for this
camera.
This icon is used to display the motion detection status
of the current live video feed. This icon will be white
when no motion is detected and will be yellow when
motion is detected.
This icon is used to display the recording status of the
current live video feed. This icon will be white when not
recording and will be yellow when recording.
Day Mode will be displayed when the camera is
supplying video feed in a daylight (normal light)
environment.
Night Mode will be displayed when the camera is
supplying video feed in a night time (low light)
environment.
When the Day Mode is active, the video feed will be in
color.
When the Night Mode is active, the video feed will be in
black and white.
This is the pan and tilt control panel. Click the left, right,
up or down arrows to control the camera to pan or tilt in
the direction needed. Also, for more accuracy, arrows
are available in between the left, right, up and down
arrows. Click the [+] button to return the camera to the
home position.

© Copyright 2014 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TV-IP662PI
17
Icon
Description
Click this button to initiate the automatic pan option. The
camera will pan to the far left and then to the far right and
then return to the home position.
Click this button to initiate Patrol once continuously at
selected pre-set positions.
Click this button to immediately stop the pan or patrol
options.
Go To
Select a pre-set position option here. The camera will then
pan/tilt to the position selected.
Pan Speed
Select the pan speed value here.
Tilt Speed
Select the tilt speed value here.
Please select a
language
Select the display language here. Options to choose from
are English, German, Spanish, Russian, and French.
Click this icon to view the video profile 1.
Click this icon to view the video profile 2.
Click this icon to view the video profile 3.
Click this icon to view the video profile 4.
Click this icon to view the video feed in the full screen
mode.
Click this icon to manually take a snapshot of the video
feed.
Click this icon to manually enable or disable video
recording.
Icon
Description
Click this icon to specify the video/snapshot storage
folder on the local PC.
Click this icon to enable or disable the audio feed from
the camera.
Click this icon to enable or disable the audio feed to the
camera.
Click this icon to manually toggle the video feed between
the Day and the Night Modes.
Click one of these options to digitally zoom the video
feed by 1, 2 or 4 times.

© Copyright 2014 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TV-IP662PI
18
Setup
In the Setup section we can view and configure more advanced features available on
the TV-IP662PI. After clicking the Setup button, the following page will be displayed.
In the left side of this page, there is a Category menu. Except for Wizard, Motion
Detection, and Sound Detection, within each category, there are multiple pages
available that is used to configure different types of features available on this camera.
Wizard
The wizard will guide users through a simplified step-by-step wizard to configure basic
settings available on this camera. Click Next to continue.

© Copyright 2014 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TV-IP662PI
19
Step 1: LAN Settings
On this page users can configure the IPv4 and IPv6 connection settings for this camera.
Select DHCP Connection to allow the camera to automatically obtain the IPv4 or IPv6
settings from a DHCP server on the local network, or select Static IP Address to
manually enter the IPv4 and IPv6 connection settings. Click Next to continue.
Step 2: Internet Settings
Click the checkbox to enable the Internet connection via PPPoE. On this page users can
enter the PPPoE Username and Password. Click the checkbox to enable this feature.
This information can be acquired from your ISP. Click Next to continue.
Step 3: DDNS Settings
Click the checkbox to enable DDNS. In Server Address, select one of the domains from
the drop-down menu. The field to the left of the drop-down menu automatically
populates. Under Host Name enter the name the DDNS service provided. Enter a
Username and Password, repeat the password and finally enter the Timeout value.
Timeout states the time DDNS is updated. Click Next to continue.