TRENDnet TE-SK1 User manual

The TE-SK1 is designed as a total solution for connecting two
personal computers to enable them to share files, printers, fax
servers, and/or email. TRENDnet’s TE-SK1 features a 5-port
10Base-T hub and two PCI Ethernet Cards. TRENDnet’s
network starter kits are specially designed for home and small
office use and can support up to 5 network nodes without
expansion. There is enough room on the hub to add a server,
network printer, and a third personal computer.
TE-SK1
5-Port 10Base-T Hub Ethernet Starter Kit
5-port 10Base-T
Uplink port for cascading to another 10Base-T hub
Small size and weight for portability
Full diagnostic LED’s for power, collision, and link/Rx
status
5 Year Warranty
Supporting 32-bit PCI Bus
Plug and Play
Compatible with all major Network Operating Systems
5 Year Warranty
BENEFITSFEATURES
Upgrabable:
Expandable:
Flexible:
Cost Effective:
Reliable:
Add nodes as needed.
Add a server, internet station, network
printer or a third PC without changing
the hub.
Hub is smaller enough to be put
anywhere it is needed.
Buy only the part you need.
5 year warranty.
5-port 10Base-T Hub (TE-500)
32-Bit PCI Ethernet 10Base-T Card (TE-PCIWT)
TE-SK1 (11-17-2002)
TRENDnet
TRENDware, USA
What's Next in Networking

PRODUCT INFORMATION
To Order Please Call:
1-888-326-6061
NETWORKING SOLUTIONS
SPECIFICATIONS
TE-SK1: 5-Port 10Base-T Hub Ethernet Starter Kit
(2 x TE-PCIWT, 1 x TE-500, 2 x 15' CAT 5 cables)
TE100-SK1: 5-Port 100Base-T Hub Fast Ethernet Starter Kit
(2 x TE100-PCIW, 1 x TE100-H5E, 2 x 15' CAT 5 cables)
TE100-SK2: 4-Port 10/100Mbps Dual Speed Starter Kit
(1 x TE100-PCIWplus, 1x TE100-DX4PCI, 1 x 15' CAT 5 cables)
TE100-SK3: 5-Port 10/100Mbps Switch Fast Ethernet
Network Kit
(2 x TE100-PCIWN, 1x TE100-S55E, 2 x 20' CAT 5 cables)
TE100-SK3plus: 5-Port 10/100Mbps Switch Fast Ethernet
Network Kit
(2 x TE100-PCIWN, 1x TE100-S55Eplus, 2 x 20' CAT 5 cables)
TE100-SK4: 10/100Mbps Switched Fast Ethernet Network Kit
(2 x TE100-PCIWN, 1 x TE100-S5P, 2 x 15" CAT 5 cable)
DC Input:
5-16 VDC
Power Consumption:
2W Max.
Cabling:
EIA Category 3,4 and 5 STP/UTP
Uplink Port:
Shared Port #5 (slide switch)
Dimensions:
102 x 81 x 25mm (LxWxH)
Weight:
114 grams (excluding power adapter)
Operating Temperature:
0° - 55° C
Certification:
FCC, UL, , C-tick, CE
•
•
•
•
•
•
•
•
TE-500
Standards:
IEEE 802.3 10Base-2 and 10Base-T
Data Transfer Rate:
10Mbps (Half Duplex) / 20Mbps (Full Duplex)
Topology:
Star or Bus (Dependent on media type)
Diagnostic LED’s:
Tx/Rx, Link, and UTP/BNC Media
•
•
•
•
TE-PCIWT
TE-SK1
5-Port 10Base-T Hub Ethernet Starter Kit
TE-SK1
5-Port 10Base-T Hub Ethernet Starter Kit
U
L
R
TRENDnet is a registered treademark of TRENDware International, Inc. Other Brands and product names are trademarks of their respective holders. Information provided in this
document pertain to TRENDware products and is subject to change at any time, without notice. For the most recent product information please visit ____________________
http://www.TRENDNET.com.
©
Copyright TRENDware International, Inc. 2004. All Rights Reserved.
TRENDware International, Inc.
3135 Kashiwa Street
Torrance, CA. 90505. USA
Tel: [phone]
Fax: [phone]
Web:
Email: [email protected]
www.TRENDNET.com
ORDERING INFORMATION
TRENDnet
TRENDware, USA
R