TRENDnet TE100-S1212 User manual

The TE100-S1212 is a Fast Ethernet switch that enhances
workgroup performance while providing a high level of
flexibility. With 10/100Mbps of power, the TE100-S1212
allows users to simply plug any port to either 10Mbps or
100Mbps network to multiply and boost response time which
helps meet heavy workload demands. The switch’s N-way
ports automatically negotiate between 10Mbps and 100Mbps
network speeds, as well as with half and full duplex
capabilities. Any port can act as an uplink to Fast Ethernet or
downlink to Ethernet.
TE100-S1212
12-Port 10/100Mbps N-way Auto-sensing Switching Hub
Compliant with IEEE 802.3 10Base-T, IEEE 802.3µ 100Base-
TX/FX standard
Supports 12 RJ-45 10/100Mbps auto-sensing ports
10/100Mbps auto-negotiation and auto-sensing on all ports
Full/half duplex operation for each port
1.3 Gbps Switching Fabric. Provides high-speed switching
scheme
Store-and-forward packet switching
Built-in address self-learning mechanism
Built-in 120 KB packet buffer per port
Built-in 4 KB filtering address table per port
14,880 pps per port forwarding rate for 10Base-T
148,800 pps per port forwarding rate for 100Base-TX
Optional DMA Port for 100Base-FX SC type module (share with
port 12)
Console Port for easy diagnostic
Complete Runt & CRC Filtering
5 Year Warranty
BENEFITSFEATURES
Easy Upgrade:
Expandability:
Flexibility:
Cost Effective:
Performance:
Ethernet workgroups are able to
upgrade to Fast Ethernet by changing
adapters and hubs without changing
switches.
Simple expansion can be done by
cascading two or more switches. As
all ports support 200Mbps full duplex.
The switch’s N-way ports
automatically negotiate between
10Base-T and 100Base-TX network
speeds as well as between full and
half duplex modes.
Provides 10/100Mbps of Fast Ethernet
at an affordable rate.
Increase Fast Ethernet Bandwidth by
12 times.
TRENDnet
TRENDware, USA
R
TE100-PC16 (11-17-2002)

PRODUCT INFORMATION
To Order Please Call:
1-888-326-6061
TE100-S28: 10-port 10/100Mbps Switching Hub
TE100-S22: 2-port ( 2 x 10/100Mbps) N-way
Switching Hub
TE100-S88: 8-port 10/100Mbps N-way
Switching Hub
TE100-S1212: 12-port (12 x 10/100Mbps) N-
way Switching Hub
NETWORKING SOLUTIONS
TRENDnet is a registered treademark of TRENDware International, Inc. Other Brands and product names are trademarks of their respective holders. Information provided in this
document pertain to TRENDware products and is subject to change at any time, without notice. For the most recent product information please visit ____________________
http://www.trendware.com.
©
Copyright TRENDware International, Inc. 2002. All Rights Reserved.
SPECIFICATIONS
ORDERING INFORMATION
TRENDware International, Inc.
3135 Kashiwa Street
Torrance, CA. 90505. USA
Tel: [phone]
Fax: [phone]
Web:
Email: [email protected]
www.trendware.com
ORDERING INFORMATION
TRENDnet
TRENDware, USA
R
TE100-S1212
12-Port 10/100Mbps N-way Auto-sensing Switching Hub
TE100-S1212
12-Port 10/100Mbps N-way Auto-sensing Switching Hub
Protocol:
• CSMA/CD
Speed:
• 10Mbps (half duplex) / 20Mbps (full duplex)
for 10Base-T
• 100Mbps (half duplex) / 200Mbps (full duplex)
for 100Base-TX
Cabling:
• CAT 3, 4, 5 UTP/STP for 10Base-T
• CAT 5 UTP/STP for 100Base-TX
LED's:
• Power, Link/ACT, FDX/COL, 100M
Power:
• Internal Power Supply (100-240V, 50/60Hz)
40W, 5V/8A
Dimensions:
• 442 x 258 x 44 mm / 17.4" x 10.2" x 1.7" (L x W x H)
Weight:
• 3.73 kg / 8.2 lb.
Temerature:
• Operating: 0° to 50° C
• Storage: -20° C to 80° C
Humidity:
• 10% - 90% (non-condensing)
Certification:
• FCC Class A, UL, CSA, CE
®
U
L
R