TRENDnet TPE-T80 User manual

FEATURES
• IEEE 802.3at and IEEE 802.3af Power over Ethernet (PoE) compliant
• Support PoE class 2 (7 watts) , 3 (15.4 watts), and 4 (30 watts)
• 8 x 10/100Mbps Auto-MDIX PoE+ ports
• Provides up to 30 watts per PoE port
• 1.6 Gbps switching fabric
• 8 DIP switches turns PoE support on/off per port
• Full wire-speed non-blocking reception and transmission
• Store-and-forward switching method
• Back pressure Flow Control for half-duplex mode
• IEEE 802.3x Flow Control for full-duplex mode
• 1.25Mbits RAM Data Buffer
• 4K MAC address entries
• 250 watt Internal Power supply: AC input (90~260V/AC, 50~60Hz)
• Plug and Play
• Sturdy metal enclosure
• 3-year limited warranty
TPE-T80
rev: 01.13.2012
8-Port 30 Watt 10/100Mbps PoE+ Switch
TPE-T80 (v1.0R)
TRENDnet’s 8-Port 30 Watt 10/100Mbps PoE+ Switch, model
TPE-T80, reduces equipment and installation costs by delivering data and power
over existing Ethernet cables. The IEEE 802.3at PoE+ standard supplies up to 30
watts of power per port for devices such as high power wireless access points, PTZ
(Pan Tilt Zoom) Internet cameras, and VoIP telephony systems.
Auto sensing technology delivers up to 30 watts to 802.3at PoE+, 15 watts to
802.3af PoE, and only data to non-PoE devices. GREENnet technology reduces
energy costs by up to 75% when the switch is not in use.
Boost offi ce effi ciency and reduce network congestion with a total switching
capacity of 1.6Gbps. LED indicators display device status for easy power
management and troubleshooting. An internal power supply reduces clutter and DIP
switches on the front panel allow managers to manually cut PoE power to a given
port. Use this switch with TRENDnet PoE Splitters to install non-PoE devices in
remote locations.
PRODUCT OVERVIEW
• 30 watts per PoE+ port
• Reduces equipment cost by delivering data and power over existing network cables
• 8 x 10/100Mbps PoE+ ports
• 1.6 Gbps switching capacity
• Up to 75% GREENnet power savings

TRENDnet is a registered trademark. Other Brands and product names are trademarks of their respective holders. Information provided in this document pertain to TRENDnet products and is subject to change at any time,
without notice. For the most recent product information please visit http://www.trendnet.com Copyright ©TRENDnet.All Rights Reserved.
NETWORKING SOLUTIONS
8-Port 30 Watt 10/100Mbps PoE+ Switch
TPE-T80 (v1.0R)
CONTACT INFORMATION
20675 Manhattan Place,Torrance, CA 90501 USA
Tel: [phone]
Fax: [phone]
Web: www.trendnet.com
Email: [email protected]
1-888-326-6061
PACKAGE CONTENTS
TPE-T80
Quick Installation Guide
Power cord
RELATED PRODUCTS
TV-IP612P ProView PoE Pan/Tilt/Zoom Internet Camera
TPE-104S Power over Ethernet (PoE) Splitter
TPE-T160 16-Port 30 Watt 10/100Mbps PoE+ Switch
SPECIFICATIONS
HARDWARE
Standard • IEEE 802.3 10Base-T
• IEEE 802.3u 100Base-TX
• IEEE 802.3at Power over Ethernet (PoE+)
• IEEE 802.3af Power over Ethernet (PoE)
• IEEE 802.3x Flow Control
Ports • 8 x 10/100Mbps Auto-MDIX PoE+ ports
PoE DIP Switches • Individually turns PoE support on/off for each port
Data Transfer Rate • Ethernet: 10/20Mbps (half/full duplex)
• Fast Ethernet: 100/200Mbps (half/full duplex)
Data RAM Buffer • 1.25Mbits
Address Table • 4K MAC entries
Switch Fabric • 1.6 Gbps
Power • 90~260V AC 50/60Hz, internal universal switching power
Diagnostic LEDs • Power, PoE, Link/Activity
Power Consumption • Min: 4 Watts (standby)
• Max: 250 Watts
• PoE Max: 240 Watts (8 x 30 watts PoE devices connected)
Temperature • Operating: 0° ~ 55°C (32° ~ 131°F)
• Storage: -20° ~ 90°C (-4° ~ 194°F)
Humidity • Max. 90% (non-condensing)
Dimensions • 263 x 160 x 44 mm (10.4 x 6.3 x 1.73 in.)
Weight • 1.8 kg (4 lbs.)
Certifi cations • CE, FCC
PoE
Power over Ethernet • Up to 30 watts per port; PD classifi cation
• Polymer switch for short protection
• PoE: pin 3,6 for power+ and pin 1,2 for power- (mode A)