TRENDnet TPE-S80 User manual

The 8-Port 10/100Mbps PoE Switch, model TPE-S80, reduces equipment
and installation costs by delivering data and power over existing Ethernet
cables to Power over Ethernet (PoE) enabled devices such as Access
Points and IP Cameras.
Boost office efficiency and reduce network congestion with a total
switching capacity of 1.6Gbps. LED indicators display device status for
easy power management and troubleshooting. An internal power supply
reduces clutter and delivers 15.4 Watts to each PoE port. A convenient
on/off button is located on the back of the switch. Non-PoE devices can
connect to the switch—auto-sensing PoE technology cuts power to non-
PoE connected devices. Use TRENDnet's PoE Splitter with the TPE-S80
to install non-PoE devices in remote locations.
TPE-S80 (V1.0R)
8-Port 10/100Mbps PoE Switch
TPE-S80
rev: 04.27.2010
Features
• IEEE 802.3af Power over Ethernet (PoE) compliant
• 8 x 10/100Mbps Auto-MDIX RJ-45 PoE ports
• On/Off power switch
• Provides 15.4 watts per PoE port
• Supports PoE Powered Device (PD) classification
• 1.6Gbps switching fabric
• Full wire-speed non-blocking reception and transmission
• Store-and-forward switching method
• Back pressure Flow Control for half-duplex mode
• IEEE 802.3x Flow Control for full-duplex mode
• 512Kbits RAM Data Buffer and 1K MAC address entries
• Diagnostic LEDs (Power, Link/Activity, PoE Act/Status)
• Plug and Play
• Sturdy metal enclosure
• Mounting hardware included
• 5-year limited warranty
network
accessories

SPECIFICATIONS
Ports
Standards
Power Switch
Data Transfer Rate
Data RAM Buffer
Address Table
• IEEE 802.3 10Base-T • IEEE802.3u 100Base-TX • IEEE 802.3af Power over Ethernet • IEEE 802.3x Flow Control
• 8 x 10/100Mbps Auto-MDIX PoE ports
• On/Off power switch
• Ethernet: 10/20Mbps (half/full duplex) • Fast Ethernet: 100/200Mbps (half/full duplex)
• 512Kbits
• 1.6Gbps
Hardware
Hardware
SPECIFICATIONS
Certifications
• Up to 15.4 watts per port; PD classification
Power over Ethernet
• 100~240VAC 50/60Hz, internal universal switching power
Switch Fabric
Power
• Power, Link/Activity, PoE Act/Status
Diagnostic LEDs
Power Consumption
Temperature
Humidity
Dimensions
• CE, FCC
Weight
• 1K MAC entries
• 6 Watts max. (no Power Device (PD) connected) • 132 Watts max. (8 x 15.4 watts PoE devices connected)
• Operating: 0°~ 45°C (32°~ 113°F) • Storage: -10°~ 70°C (14°~ 158°F)
• Polymer switch for short protection • PoE: pin 3,6 for power+ and pin 1,2 for power
• 10%- 95% (non-condensing)
• 266 x 160 x 44 mm (10.5 x 6.3 x 1.73 in.)
• 1.4 kg (3.1 lb)
• Multi-Language Quick Installation Guide
CONTACT INFORMATION
RELATED PRODUCTS
PACKAGE CONTENTS
NETWORKING SOLUTIONS
• TPE-S80
• Rack mounting kit
• Power cord
TPE-80WS
TV-IP512P
8-Port Gigabit Web Smart PoE Switch
ProView PoE Internet Camera
20675 Manhattan Place,Torrance, CA 90501 USA
Tel: [phone]
Fax: [phone]
Web:
Email: [email protected]
1-888-326-6061
www.trendnet.com
TPE-102S Power over Ethernet Splitter
TRENDnet is a registered trademark. Other Brands and product names are trademarks of their respective holders. Information provided in this document pertain to TRENDnet
products and is subject to change at any time, without notice. For the most recent product information please visit
http://www.trendnet.com.
©
Copyright TRENDnet. All Rights Reserved.
TPE-S80 (V1.0R)
8-Port 10/100Mbps PoE Switch
8-Port 10/100Mbps PoE Switch
(TPE-S80)
ProView PoE Internet Camera
(TV-IP512P)
8-Port Gigabit Web Smart PoE Switch
(TPE-80WS)
Power + Ethernet Data
ProView Megapixel PoE Internet Camera
(TV-IP522P)
ProView PoE Internet Camera
(TV-IP512P)