TRENDnet TEW-716BRG User manual

© Copyright 2012 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide Table of Contents
i

© Copyright 2012 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide Table of Contents
ii
Contents
Product Overview ...........................................................................3
Package Contents .......................................................................................................... 3
Features ......................................................................................................................... 3
Product Hardware Features........................................................................................... 4
Application Diagram ...................................................................................................... 5
Basic Router Setup ..........................................................................6
Creating a Home Network ............................................................................................. 6
Router Installation ......................................................................................................... 7
Wireless Networking and Security...................................................9
How to choose the type of security for your wireless network .................................... 9
Secure your wireless network ..................................................................................... 10
Connect wireless devices to your router ..................................................................... 11
Connect wireless devices using WPS ........................................................................... 11
Basic wireless settings ................................................................................................. 12
Steps to improve wireless connectivity ....................................................................... 14
Access Control Filters ....................................................................14
Access control basics ................................................................................................... 14
MAC address filters ................................................................................................. 14
Domain Filters ......................................................................................................... 15
URL Filters ............................................................................................................... 15
Packet Outbound/Inbound Filters........................................................................... 16
Advanced Router Setup.................................................................18
Access your router management page........................................................................ 18
Change your router login password ............................................................................ 18
Set your router date and time..................................................................................... 18
Manually configure your Internet connection ............................................................ 19
Change your router IP address.................................................................................... 20
Set up the DHCP server on your router....................................................................... 20
Set up DHCP reservation ............................................................................................. 21
Enable/disable UPnP on your router........................................................................... 21
Enable/disable DoS (Denial of Service) Prevention ..................................................... 22
Allow/deny ping requests to your router from the Internet....................................... 22
Identify your network on the Internet ........................................................................ 22
Allow remote access to your router management page............................................. 23
Open a device on your network to the Internet.......................................................... 23
DMZ......................................................................................................................... 23
Virtual Server .......................................................................................................... 24
Special Applications ................................................................................................ 25
Prioritize traffic using QoS (Quality of Service) ........................................................... 26
Create schedules ......................................................................................................... 26
Router Maintenance & Monitoring ............................................... 27
Reset your router to factory defaults .......................................................................... 27
Router Default Settings ............................................................................................... 28
Backup and restore your router configuration settings .............................................. 28
Upgrade your router firmware .................................................................................... 29
Restart your router...................................................................................................... 29
Check connectivity using the router management page............................................. 30
Check the router system information ......................................................................... 30
View your router log.................................................................................................... 31

© Copyright 2012 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide Table of Contents
ii
View wireless devices connected to your router......................................................... 32
View NAT activity of your router ................................................................................. 32
Configure your router log ............................................................................................ 33
Enable SNMP on your router....................................................................................... 34
Add static routes to your router.................................................................................. 34
Enable dynamic routing on your router ...................................................................... 35
Router Management Page Structure .............................................36
Technical Specifications.................................................................37
Troubleshooting............................................................................38
Appendix ......................................................................................39

© Copyright 2012 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide TEW-716BRG
3
Product Overview
TEW-716BRG
Package Contents
In addition to your router, the package includes:
•TEW-716BRG
•Multi-Language Quick Installation Guide
•CD-ROM (User’s Guide)
•USB power cable
•Power Adapter (5V, 1.2A).
If any package contents are missing or damaged, please contact the retail store, online
retailer, or reseller/distributor from which the product was purchased.
Features
TRENDnet’s 3G Mobile Wireless Router, model TEW-716BRG, shares a single Internet
connection from a compatible USB 3G modem provider (such as Sprint™, AT&T™, or
Verizon™) with multiple users.
Compatible with USB dongles from every mobile provider, this compact router shares an
Internet connection anywhere there is a 3G* mobile signal. No installation is required
with auto-recognized modems; simply plug and go.
The router can be powered directly from a laptop's USB ports, eliminating the search for
an electrical outlet. The device also features a built in hanging hook allowing users to
neatly hang the TEW-716BRG on the back of a laptop screen while working. The TEW-
716BRG makes it easy to share a single Internet connection while at the airport, job site,
carpooling, or even while on vacation.
•USB 2.0 port (3G dongle Internet)
•USB power port
•Hanging clip neatly hangs the TEW-716BRG on the back of most laptop screens
•High-speed data rates of up to 150Mbps based on IEEE 802.11n*
•Compliant with IEEE 802.11b/g standards
•Works with UMTS/HSPA, WCDMA (HSDPA), CDMA2000 (EV-DO), and TD-SCDMA
mobile networks**
•Third party wireless 3G dongles connects to ISPs such as AT&T™, Sprint™, T-Mobile™,
or Verizon™***
•Powered by computer’s USB ports for easy portability or by an optional electrical
adapter
•Advanced wireless encryption of up to WPA2-PSK
•Built-in antennas provide high-speed performance and expansive wireless coverage
•Quality of Service (QoS) prioritization controls
•Advanced Firewall protection with Network Address Translation (NAT), Stateful Packet
Inspection (SPI), and DoS (Denial of Service) Attacks
•Static and Dynamic RIP V1/2 routing support
•Access restriction with internet Access Control by URL, Domain, packet type, and
MAC address
•Universal Plug and Play (UPnP) for auto discovery and support for device
configuration of Internet applications

© Copyright 2012 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide TEW-716BRG
4
•Easy setup via web browser using Internet Explorer 6.0 or above, Firefox 2.0 or above,
Chrome, Opera, Safari
•One touch wireless connection to wireless clients using the WPS button
•Easy setup installation wizard with built-in WAN auto detection
•3-year limited warranty
*Maximum wireless signal rates are referenced from IEEE 802.11 theoretical specifications. Actual
data throughput and coverage will vary depending on interference, network traffic, building
materials and other conditions.
Product Hardware Features
Bottom View
•Power Port: Connect the included power adapter from your router power port
and to an available power outlet.
•On/Off Power Switch: Push the router On/Off power switch to turn your router
“On” (Inner position) or “Off” (Outer position).
•WPS/Reset Button: Press and hold this button for 3 seconds to activate WPS
Push Button Configuration (PBC) or Press and hold for 10 seconds to reset the
router back to factory default settings.
WPS/Reset
Button
Power Port
On/Off
Power switch

© Copyright 2012 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide TEW-716BRG
5
Top View
•3G USB Port: Plug your USB 3G Dongle to connect to your 3G network
•3G LED – This LED indicator is solid green when your router is connected to
your 3G network. The LED indicator will be blinking green while data is
transmitted or received through the router.
•WLAN (Link/Activity) LED:This LED indicator is blinking green when the
wireless is “On” and functioning properly on your router. This LED indicator will
be blinking green rapidly while data is transmitted or received by your wireless
clients or wireless network devices connected to your router.
•Hanging Clip: Remove the hanging clip from the router to use as a hanging clip
to most monitors. Press the button on the back of the router to release the
hanging clip and rotate the clip around and clip back to the router.
Application Diagram
The 3G Mobile Wireless Router is installed and is connected to the 3G wireless network.
Wireless signals from the router are broadcasted to wireless clients such as laptops
(with wireless capability) thereby providing Internet access.
3G USB Port
LED Hanging Clip

© Copyright 2012 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide TEW-716BRG
6
Basic Router Setup
Creating a Home Network
What is a network?
A network is a group of computers or devices that can communicate with each other. A
home network of more than one computer or device also typically includes Internet
access, which requires a router.
A typical home network may include multiple computers, a media player/server, a
printer, a modem, and a router. A large home network may also have a switch,
additional routers, access points, and many Internet-capable media devices such as TVs,
game consoles, and Internet cameras.
•Modem – Connects a computer or router to the Internet or ISP (Internet Service
Provider).
•Router – Connects multiple devices to the Internet.
•Switch –Connect several wired network devices to your home network. Your router
has a built-in network switch (the LAN port 1-4). If you have more wired network
devices than available Ethernet ports on your router, you will need an additional
switch to add more wired connections.
How to set up a home network
1. For a network that includes Internet access, you’ll need:
•Computers/devices with an Ethernet port (also called network port) or wireless
networking capabilities.
•A modem and Internet service to your home, provided by your ISP (modem
typically supplied by your ISP).
•A router to connect multiple devices to the Internet.
2. Make sure that your modem is working properly. Your modem is often provided by
your Internet Service Provider (ISP) when you sign up for Internet service. If your
modem is not working contact your ISP to verify functionality.
3. Set up your router. See “How to setup your router” below.
4. To connect additional wired computers or wired network devices to your network,
see “Connect wireless devices to your router” on page 11.
5. To set up wireless networking on your router, see “Secure your wireless network” on
page 10.
How to setup your router
Refer to the Quick Installation Guide or continue to the next section “Router
Installation” on page 7 for more detailed installation instructions.
Where to find more help
In addition to this User’s Guide, you can find help below:
•http://www.trendnet.com/support
(documents, downloads, and FAQs are available from this Web page)

© Copyright 2012 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide TEW-716BRG
7
Router Installation
Hardware Installation
1. Verify that you have an Internet connection when connecting your computer directly
to your 3G dongle.
2. Connect the Mini-USB end of the power adapter to the TEW-716BRG and connect the
power adapter to a power outlet.
3. Connect your 3G dongle to the USB port of the TEW-716BRG.
4. Move the power switch of the TEW-716BRG to the On position and verify that the
LEDs are turned on.
5. Connect your computer wirelessly to the TEW-716BRG. The default SSID (Wireless
Network Name) of the TEW-716BRG is TRENDnet716.
6. Open a web browser and type http://192.168.10.1 in the address bar and then press
Enter.
7. Enter the System Password and the click Login. By default the System Password is
admin.
8. Select Wizard and click Enter.
6. You will be prompted to change the login password of your router. Complete the
fields and click Next.
7. Select the time zone you would like to set on your router and click Next.

© Copyright 2012 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide TEW-716BRG
8
8. Verify the LAN IP address you would like to apply to the router and select the WAN
type you will be using. Click Next to continue.
9. Select Automatic to have the router automatically detect your 3G WAN settings. Click
Next to continue.
10. Enter the Network ID (SSID) you would like to assign to the router.
11. Select the wireless security settings you would like to apply to the router.
11. Verify your settings and click Apply Settings.
Note: Once the router reboots you will need to connect to the updated settings you
have applied during the wizard (Network ID, Wireless Security, LAN IP).

© Copyright 2012 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide TEW-716BRG
9
Wireless Networking and Security
How to choose the type of security for your wireless network
Setting up wireless security is very important. Leaving your wireless network open and
unsecure could expose your entire network and personal files to outsiders. TRENDnet
recommends reading through this entire section and setting up wireless security on your
new router.
There are a few different wireless security types supported in wireless networking each
having its own characteristics which may be more suitable for your wireless network
taking into consideration compatibility, performance, as well as the security strength
along with using older wireless networking hardware (also called legacy hardware).
It is strongly recommended to enable wireless security to prevent unwanted users from
accessing your network and network resources (personal documents, media, etc.).
In general, it is recommended that you choose the security type with the highest
strength and performance supported by the wireless computers and devices in your
network. Please review the security types to determine which one you should use for
your network.
Wireless Encryption Types
•WEP: Legacy encryption method supported by older 802.11b/g hardware. This is
the oldest and least secure type of wireless encryption. It is generally not
recommended to use this encryption standard, however if you have old 802.11 b or
802.11g wireless adapters or computers with old embedded wireless cards(wireless
clients), you may have to set your router to WEP to allow the old adapters to
connect to the router. Note: This encryption standard will limit connection speeds to
54Mbps.
•WPA: This encryption is significantly more robust than the WEP technology. Much
of the older 802.11g hardware was been upgraded (with firmware/driver upgrades)
to support this encryption standard. Total wireless speeds under this encryption
type however are limited to 54Mbps.
•WPA-Auto: This setting provides the router with the ability to detect wireless
devices using either WPA or WPA2 encryption. Your wireless network will
automatically change the encryption setting based on the first wireless device
connected. For example, if the first wireless client that connects to your wireless
network uses WPA encryption your wireless network will use WPA encryption. Only
when all wireless clients disconnect to the network and a wireless client with WPA2
encryption connects your wireless network will then change to WPA2 encryption.
NOTE: WPA2 encryption supports 802.11n speeds and WPA encryption will limit
your connection speeds to 54Mbps
•WPA2: This is the most secure wireless encryption available today, similar to WPA
encryption but more robust. This encryption standard also supports the highest
connection speeds. TRENDnet recommends setting your router to this encryption
standard. If you find that one of your wireless network devices does not support
WPA2 encryption, then set your router to either WPA or WPA-Auto encryption.
Note: Check the specifications of your wireless network adapters and wireless
appliances to verify the highest level of encryption supported.
Below is brief comparison chart of the wireless security types and the
recommended configuration depending on which type you choose for your wireless
network.
Security Standard WEP WPA WPA2
Compatible
Wireless
Standards
IEEE 802.11a/b/g
(802.11n devices
will operate at
802.11g to connect
using this standard)
IEEE 802.11a/b/g
(802.11n devices
will operate at
802.11g to connect
using this
standard)
IEEE 802.11a/b/g/n
Highest
Performance
Under This
Setting Up to 54Mbps Up to 54Mbps Up to 450Mbps*
Encryption
Strength Low Medium High
Additional
Options
Open System or
Shared Key,
HEX or ASCII,
Different key sizes
TKIP or AES,
Preshared Key or
RADIUS
TKIP or AES,
Preshared Key or
RADIUS
Recommended
Configuration
Open System ASCII
13 characters
TKIP
Preshared Key
8-63 characters
AES
Preshared Key
8-63 characters
*Dependent on the maximum 802.11n data rate supported by the device (150Mbps,
300Mbps, or 450Mbps)