TRENDnet TEW-813DRU User manual

TRENDnet User’s Guide Cover Page

© Copyright 2014 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide Table of Contents
i
Table of Contents
Product Overview ...........................................................................1
Package Contents .......................................................................................................... 1
Features ......................................................................................................................... 1
Product Hardware Features........................................................................................... 2
Application Diagram ...................................................................................................... 3
Router Setup...................................................................................4
Creating a Home Network ............................................................................................. 4
Router Installation ......................................................................................................... 5
Connect additional wired devices to your network....................................................... 8
Basic Router Settings.......................................................................9
Access your router management page.......................................................................... 9
Network Status .............................................................................................................. 9
Wireless Settings ......................................................................................................... 10
Guest Network............................................................................................................. 12
Parental Control........................................................................................................... 13
Access Rule (MAC/IP Filter) ............................................................................... 13
Website Filter..................................................................................................... 14
Wireless Networking and Security.................................................15
How to choose the type of security for your wireless network .................................. 15
Secure your wireless network ..................................................................................... 16
Connect wireless devices to your router ..................................................................... 18
Connect wireless devices using WPS ........................................................................... 18
MAC Filter (Wireless)................................................................................................... 20
Advanced wireless settings.......................................................................................... 21
Multiple SSID...................................................................................................... 21
Wireless bridging using WDS (Wireless Distribution System) ........................... 22
Advanced Settings ............................................................................................. 24
Steps to improve wireless connectivity....................................................................... 25
Device Orientation............................................................................................. 25
Advanced Router Settings ............................................................. 26
Change your router login password ............................................................................ 26
Manually configure your Internet connection ............................................................ 26
IPv6 Settings ................................................................................................................ 27
Clone a MAC address................................................................................................... 28
Change your router IP address.................................................................................... 28
Set up the DHCP server on your router....................................................................... 29
Set up DHCP reservation ............................................................................................. 30
Enable/disable UPnP on your router........................................................................... 31
Enable/disable Application Layer Gateways (ALG)...................................................... 31
Allow/deny multicast streaming.................................................................................. 32
Identify your network on the Internet ........................................................................ 32
Set your router date and time..................................................................................... 33
Create schedules ......................................................................................................... 34
Access Control (IP Protocol Filter) ............................................................................... 35
Inbound Filter .............................................................................................................. 36
Open a device on your network to the Internet.......................................................... 37
DMZ ................................................................................................................... 37
Virtual Server ..................................................................................................... 37
Special Applications........................................................................................... 39
Gaming............................................................................................................... 40
Allow remote access to your router management page............................................. 41
Add static routes ......................................................................................................... 41
Enable Dynamic Routing.............................................................................................. 42
Using External USB Storage ........................................................... 43

© Copyright 2014 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide Table of Contents
ii
File Sharing Server ....................................................................................................... 43
FTP (File Transfer Protocol) Server .............................................................................. 45
Router Maintenance & Monitoring................................................46
Reset your router to factory defaults .......................................................................... 46
Router Default Settings ............................................................................................... 46
Backup and restore your router configuration settings .............................................. 47
Reboot your router...................................................................................................... 47
Upgrade your router firmware .................................................................................... 48
Allow/deny ping requests to your router from the Internet ....................................... 49
Wireless Client List....................................................................................................... 49
Check the router system information.......................................................................... 50
View your router log .................................................................................................... 52
Router Management Page Structure .............................................53
Technical Specifications.................................................................54
Appendix ...................................................................................... 56

© Copyright 2014 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide TEW-813DRU
1
Product Overview
TEW-813DRU
Package Contents
In addition to your router, the package includes:
•Multi-Language Quick Installation Guide
•CD-ROM (User’s Guide)
•Multi-Language Quick Installation Guide
•1 x Network cable (1.5m / 5ft.)
•Power Adapter (12V, 2A)
If any package contents are missing or damaged, please contact the retail store, online
retailer, or reseller/distributor from which the product was purchased.
Features
Designed to handle multiple HD streams in a busy connected home, TRENDnet’s high
performance AC1200 Dual Band Wireless Router, model TEW-813DRU, creates two
concurrent wireless networks—a high performance 867 Mbps Wireless AC network and
a 300 Mbps Wireless N network to connect common wireless devices.
Ease of Use
Easy Setup
Get up and running in minutes with the intuitive guided setup
One Touch Connection
Securely connect to the router at the touch of the Wi-Fi Protected Setup (WPS) button
USB Share Port
Plug in a USB flash or storage drive to share content across the network
Access Control
Encrypted Wireless
For your convenience the router arrives pre-encrypted with its own unique password
Guest Network
Create a secure, isolated network for guest internet access only
Parental Controls
Control access to specific websites or types of content

© Copyright 2014 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide TEW-813DRU
2
Performance
Next Generation Wireless AC
802.11ac provides uninterrupted HD video streaming in a busy connected home
Simultaneous Dual Band
High speed 867 Mbps Wireless AC + 300 Mbps Wireless N
Gigabit Ports
Gigabit ports extend high performance wired connections
Wireless Coverage
Extensive wireless coverage with MIMO antenna technology
Backward Compatible
Compatible with legacy wireless devices
Targeted Beamforming
Increased real-time performance by directing stronger wireless to your specific location
*For maximum performance of up to 867 Mbps use with an 867 Mbps 802.11ac wireless
adapter.
**Maximum wireless signal rates are referenced from IEEE 802.11 theoretical
specifications. Actual data throughput and coverage will vary depending on
interference, network traffic, building materials and other conditions.
Product Hardware Features
Rear View
USB 2.0 – Connect USB storage devices to share over the network via FTP or Windows®
SMB/CIFS, Samba.
WPS Button (Wi-Fi Protected Setup) –Push and hold this button for 5 seconds to
activate WPS. The Power LED will blink when WPS is activated.
LAN Ports 1-4 – Connect Ethernet cables (also called network cables) from your router
LAN ports to your wired network devices.
Internet Port – Connect an Ethernet cable from your router Internet port to your
modem.
Power Port – Connect the included power adapter from your router power port and to
an available power outlet.
On/Off Power Switch – Push the router On/Off power switch to turn your router “On”
(Inner position) or “Off” (Outer position).
Reset Button – Press and hold this button for 10 seconds to reset the router.
Reset Button (Bottom)
USB 2.0 Port
Gigabit LAN Ports
1-4
Internet Port
Power Port
WPS Button
On/Off Power Switch

© Copyright 2014 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide TEW-813DRU
3
Front View
USB LED: The LED will turn on when a USB storage device is connected to the USB 2.0
port.
WPS LED: The indicator will blink when WPS is activated. The LED will stop blinking and
remain solid green automatically once WPS process is completed.
2.4G/5G Wireless (Link/Activity) LED: The indicator turns on solid green when wireless
is enabled on your router. The indicator will blink during when data is transmitted or
received by your wireless client devices connected to your router and turn off when the
wireless band is disabled or inactive.
Internet Port (Link/Activity) LED – This LED indicator is solid green when your router
Internet port is physically connected to the modem network or Ethernet port with a
network or Ethernet cable (modem turned on). The LED indicator will be blinking green
while data is transmitted or received through the Internet port of your router.
Power LED:The indicator is solid green when your router is powered on. Otherwise if
this LED indicator is off, there is no power to your router. The indicator will also blink
when WPS is activated. The LED will stop blinking and remain solid green automatically
once WPS process is completed.
Application Diagram
The router is installed near the modem (typically supplied by your ISP “Internet Service Provider”)
and physically connected to it from the router’s Internet port to the modem’s network port which
connects to the Internet. 2.4GHz wireless signals from the router are broadcasted to wireless
clients such as laptops (with wireless capability) and the less congested 5GHz wireless signals from
the router are broadcasted to other wireless client devices such as TVs, game consoles, or media
bridges thereby providing Internet access for all wireless client devices.
2.4GHz Wireless LED
5GHz Wireless LED
WPS LED
USB Port LED
Internet Port LED
Power LED

© Copyright 2014 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide TEW-813DRU
4
Router Setup
Creating a Home Network
What is a network?
A network is a group of computers or devices that can communicate with each other. A
home network of more than one computer or device also typically includes Internet
access, which requires a router.
A typical home network may include multiple computers, a media player/server, a
printer, a modem, and a router. A large home network may also have a switch,
additional routers, access points, and many Internet-capable media devices such as TVs,
game consoles, and Internet cameras.
•Modem – Connects a computer or router to the Internet or ISP (Internet Service
Provider).
•Router – Connects multiple devices to the Internet.
•Switch –Connect several wired network devices to your home network. Your
router has a built-in network switch (the LAN port 1-4). If you have more wired
network devices than available Ethernet ports on your router, you will need an
additional switch to add more wired connections.
How to set up a home network
1. For a network that includes Internet access, you’ll need:
•Computers/devices with an Ethernet port (also called network port) or wireless
networking capabilities.
•A modem and Internet service to your home, provided by your ISP (modem
typically supplied by your ISP).
•A router to connect multiple devices to the Internet.
2. Make sure that your modem is working properly. Your modem is often provided by
your Internet Service Provider (ISP) when you sign up for Internet service. If your
modem is not working contact your ISP to verify functionality.
3. Set up your router. See “How to setup your router” below.
4. To connect additional wired computers or wired network devices to your network,
see “Connect additional wired devices to your network” on page 8.
5. To set up wireless security on your router, see “Wireless Networking and Security” on
page 15.
How to setup your router
Refer to the Quick Installation Guide or continue to the next section “Router
Installation” on page 5 for more detailed installation instructions.
Where to find more help
In addition to this User’s Guide, you can find help below:
•http://www.trendnet.com/support (documents, downloads, and FAQs are
available from this Web page)

© Copyright 2014 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide TEW-813DRU
5
Router Installation
Before you Install
Many Internet Service Providers (ISPs) allow your router to connect to the Internet
without verifying the information fields listed below. Skip this section for now and if
your router cannot connect to the Internet using the standard installation process, come
back to this page and contact your ISP to verify required ISP specification fields listed
below.
1. Obtain IP Address Automatically (Dynamic IP/DHCP)
Host Name:_______________ (Optional, if required by ISP for Compatibilty)
Primary DNS Server Address: _____. _____._____._____ (Optional)
Secondary DNS Servers Address : _____. _____._____._____ (Optional)
MTU:_______ (Default: 1500, change if required by ISP)
MAC Address: ___:___:___:___:___:___ Clone your PC MAC Address (Optional)
2. Static IP/Fixed IP address
IP Address: _____. _____._____._____ (e.g. 215.24.24.129)
Subnet Mask: _____. _____._____._____
Default Gateway IP Address: _____. _____._____._____
Primary DNS Server Address: _____. _____._____._____
Secondary DNS Servers Address : _____. _____._____._____ (Optional)
MTU:_______ (Default: 1500, change if required by ISP)
MAC Address: ___:___:___:___:___:___ Clone your PC MAC Address (Optional)
3. PPPoE Dynamic IP (DHCP) / PPPoE Static IP – Standard & Russian
Type (Dynamic IP/DHCP or Static IP)
IP Address (Static IP): _____. _____._____._____ (e.g. 215.24.24.129)
Username: _________
Password: ________________
Service Name: _________________ (Optional)
DNS Servers Address 1 (Static IP): _____. _____._____._____
DNS Servers Address 2 (Static IP): _____. _____._____._____ (Optional)
Reconnect Mode: Always / On Demand / Manual (Optional)
MTU:_______ (Default: 1500, change if required by ISP)
MAC Address: ___:___:___:___:___:___ Clone your PC MAC Address (Optional)
4. PPTP - Standard & Russian
Type (Dynamic IP/DHCP or Static IP)
PPTP IP Address: _____. _____._____._____ (e.g. 215.24.24.129)
PPTP Subnet Mask: _____. _____._____._____ (e.g. 255.255.255.0)
PPTP Gateway:_____. _____._____._____ (e.g. 215.24.24.1)
PPTP Server: _____________________ (e.g. 215.24.24.150)
Username: _________
Password: ________________
Reconnect Mode: Always / On Demand / Manual (Optional)
DNS Servers Address 1 (Static IP): _____. _____._____._____
DNS Servers Address 2 (Static IP): _____. _____._____._____ (Optional)
MTU:_______ (Default: 1500, change if required by ISP)
MAC Address: ___:___:___:___:___:___ Clone your PC MAC Address (Optional)
MPPE (Microsoft® Point-to-Point Encryption) w/ MS-CHAPv2 Enabled:____(Yes or No)
5. L2TP - Standard & Russian
Type (Dynamic IP/DHCP or Static IP)
L2TP IP Address: _____. _____._____._____ (e.g. 215.24.24.129)
L2TP Subnet Mask: _____. _____._____._____ (e.g. 255.255.255.0)
L2TP Gateway:_____. _____._____._____ (e.g. 215.24.24.1)
L2TP Server: _____________________ (e.g. 215.24.24.150)
Username: _________
Password: ________________
Reconnect Mode: Always / On Demand / Manual (Optional)
DNS Servers Address 1 (Static IP): _____. _____._____._____
DNS Servers Address 2 (Static IP): _____. _____._____._____ (Optional)
MTU:_______ (Default: 1500, change if required by ISP)
MAC Address: ___:___:___:___:___:___ Clone your PC MAC Address (Optional)
MPPE (Microsoft® Point-to-Point Encryption) w/ MS-CHAPv2 Enabled:____(Yes or No)

© Copyright 2014 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide TEW-813DRU
6
Hardware Installation
1. Verify that you have an Internet connection when connecting your computer directly
to your modem.
2. Turn off your modem.
3. Disconnect the Network cable from your computer to your modem.
4. Connect your modem to the router Internet port (yellow).
5. Connect your computer to one of the router LAN ports.
6. Connect the power adapter to the router and then to a power outlet.
7. Turn on your modem.
8. Verify that the status LED indicators on the front of the router are illuminated: Power,
Internet, 5G, and 2.4G.

© Copyright 2014 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide TEW-813DRU
7
Setup Wizard
1. Open your web browser (e.g. Internet Explorer, Firefox, Safari, Chrome, or Opera) and
the wizard will automatically appear.
Note: If you have already configured your router before, the wizard will no longer
appear automatically. In your web browser, go to http://tew-813dru or you can access
the router management using the default IP address http://192.168.10.1. Your router
will prompt you for a user name and password. Enter your user name and password
and click Advanced > Setup > Wizard.
2. Select your Language and click Next..
3. If the wizard is unable to detect your Internet connection type, you will be prompted
to select it. Select your Internet connection type and click Next.
Note: Dynamic IP (DHCP) is typical for most Internet services. You can verify your
settings with your Internet Service Provider.
4. Confirm your settings. This window displays your predefined router wireless settings
and click Exit to complete the wizard.
Note: For added security, the router wireless network is pre-encrypted with its own
unique wireless network security key. You can find the unique network security key and
the pre-assigned network name (SSID) on a sticker on the side of the router and on a
label on the bottom of the router. You will need this information to connect to the
router. To change the network security key, refer to page 16 “Secure your wireless
network”. If the router is reset to factory defaults, the wireless encryption will reset to
the network security key printed on the product labels of the router.

© Copyright 2014 TRENDnet. All Rights Reserved.
8
TRENDnet User’s Guide TEW-813DRU
Connect additional wired devices to your network
You can connect additional computers or other network enabled devices to your network by using Ethernet cables to connect them to one of the available LAN ports labeled 1,2,3,4 on
your router.
Note: If you encounter issues connecting to your network, there may be a problem with your computer or device network settings. Please ensure that your computer or device network
settings (also called TCP/IP settings) are configured to obtain IP address settings automatically (also called dynamic IP address or DHCP) and to Obtain DNS Server address settings
automatically.

© Copyright 2014 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide TEW-813DRU
9
Basic Router Settings
Access your router management page
Note: Your router management page URL/domain name http://tew-813dru or IP
address http://192.168.10.1 is accessed through the use of your Internet web browser
(e.g. Internet Explorer®, Firefox®, Chrome™, Safari®, Opera™) and will be referenced
frequently in this User’s Guide.
1. Open your web browser and go to URL/domain name http://tew-813dru or IP address
http://192.168.10.1. Your router will prompt you for a user name and password.
2. For added security, the router is preconfigured with a unique password. You can find
the Password on a sticker on the side of the router and on the label on the bottom of
the router. Enter your Username and Password, select your preferred language, then
click Login.
User Name: admin
Password: (xxxxxxxx)
Note: User Name and Password are case sensitive.
Network Status
Basic > Network Status
This section displays a brief summary of the router’s basic settings and the connected
devices.
1. Log into your router management page (see “Access your router management page”
on page 9).
2. Click on Basic and click on Network Status.

© Copyright 2014 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide TEW-813DRU
10
Internet: The Internet icon displays green to indicate that your router
has successfully established an Internet connection. The Internet icon
displays orange to indicate that a physical connection has been
established on the Internet port of the router but with no successful
Internet connection has been established. The Internet icon displays
red to indicate that the Internet is physically disconnected.
Guest Network: The Guest Network icon displays orange to indicate
that there are no wireless guest networks currently enabled. The
Guest Network icon will display green to indicate that you have at
least one wireless guest network currently enabled.
USB: The USB icon displays orange to indicate that there are no USB
devices connect to the USB port(s). The USB icon displays green to
indicate that are USB devices connected to the USB port(s).
Wireless: The wireless icon displays green to indicate that wireless is
enabled on both 2.4GHz and 5GHz bands. The wireless icon displays
orange to indicate that only wireless band is enabled (2.4GHz or
5GHz). The wireless icon will display red to indicate that wireless is
disabled on both 2.4GHz and 5GHz bands.
Wireless Security: The wireless security section will display the
current security settings configured for your wireless networks. It is
strongly recommended to enable security on your wireless networks.
Connected Devices: The connected devices section displays the list of
network devices currently connected to your router.
Wireless Settings
Basic > Wireless (2.4GHz or 5GHz)
This section outlines available management options under basic wireless sub tab for
both 2.4GHz and 5GHz wireless sections. You can refer to the page 15 Wireless
Networking & Security to configure your wireless security settings.
1. Log into your router management page (see “Access your router management page”
on page 9).
2. Click on Wireless and click on Basic scroll down to Wireless Network Settings (2.4GHz
or 5GHz)
3. To save changes to this section, click Apply when finished.
•Radio On/Off – Click the radio on/off button to enable/disable the wireless radio.
Note: It is recommended to keep wireless radios enabled.
New Schedule –The schedule function allows you to define a schedule when the
wireless should be turned on. To define a new schedule, click New Schedule and
refer to page 34 “ Create Schedules”. After you have created a new schedule,
click the drop-down list and the new schedule will be available for selection.
Note: Before applying scheduling, please ensure your Time settings are configured
correct and you have defined a schedule. See page 33 to configure Time Settings
and see page 34 “ Create Schedules” to create a schedule.
Wireless Mode: When applying the Wireless Mode setting, please keep in mind the
following:
•Wireless devices that support 802.11n are backwards compatible and can connect
wirelessly at 802.11g or 802.11b.
•Wireless devices that support 802.11ac are backwards compatible and can connect
wirelessly at 802.11n or 802.11a.
•Connecting at 802.11b or 802.11g will limit the capability of your 802.11n
supported wireless devices from obtaining higher performance and data rates.
•Connecting at 802.11a or 802.11n will limit the capability of your 802.11ac
supported wireless devices from obtaining higher performance and data rates.
•Allowing 802.11b or 802.11g devices to connect to an 802.11n capable wireless
network may degrade the wireless network performance below the higher
performance and data rates of 802.11n.

© Copyright 2014 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide TEW-813DRU
11
•Allowing 802.11a or 802.11n devices to connect to an 802.11ac capable wireless
network may degrade the wireless network performance below the higher
performance and data rates of 802.11ac.
•Wireless devices that only support 802.11n or 802.11a will not be able to connect
to a wireless network that is set to 802.11ac only mode.
•Wireless devices that only support 802.11b or 802.11g will not be able to connect
to a wireless network that is set to 802.11n only mode.
•Wireless devices that only support 802.11b will not be able to connect to a wireless
network that is set to 802.11g only mode.
•Wireless devices that only support 802.11a will not be able to connect to a wireless
network that is set to 802.11n only mode.
•Wireless Network Name (SSID): Enter the wireless name (SSID) for your wireless
network. This acronym stands for Service Set Identifier and is the name of your
wireless network. It differentiates your wireless network from others around you.
By default, the router’s wireless name is unique to the device. If you choose to
change the SSID, change it to a name that you can easily remember.
•Broadcast Network Name (SSID)
oVisible - allows wireless devices to search and discover your wireless network
name (also called SSID) broadcasted by your router.
oInvisible -Turns off the ability for wireless devices to find your network. It is still
possible for wireless devices to be configured to connect to your wireless
network. Disabling this setting will disable WPS functionality.
•Enable Auto Channel Scan – Check this option to set your router to scan for which
wireless channels to use automatically.
•Frequency (Channel) – Selecting the Auto option will set your router to scan for the
appropriate wireless channel to use automatically. Click the drop-down list and
select the desired Channel for wireless communication. The goal is to select the
Channel that is least used by neighboring wireless networks.
•Channel Width: Select the appropriate channel width for your wireless network.
This setting only applies to 802.11n and 802.11ac. For greater 802.11n
performance, select Auto 20/40MHz (Options: 20MHz or Auto 20/40MHz). It is
recommended to use the default channel bandwidth settings.
For greater 802.11ac performance, select Auto 20/40/80MHz (Options: 20MHz,
Auto 20/40MHz, Auto 20/40/80MHz). It is recommended to use the default channel
width settings.
Note: Please note that the default settings may provide more stability than the
higher channel bandwidth settings such as Auto 20/40/80MHz for connectivity in
busy wireless environments where there are several wireless networks in the area.
o20 MHz – This mode operates using a single 20MHz channel for
wireless devices connecting at 802.11n on both 2.4GHz and 5GHz. This
setting may provide more stability than 20/40MHz (Auto) for
connectivity in busy wireless environments where there are several
neighboring wireless networks in the area.
oAuto 20/40MHz (11n) or Auto 20/40/80MHz (11ac) –When this
setting is active, this mode is capable of providing higher performance
only if the wireless devices support the channel width settings.
Enabling Auto 20/40MHz or Auto 20/40/80 MHz typically results in
substantial performance increases when connecting an 802.11ac/n
wireless client.

© Copyright 2014 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide TEW-813DRU
12
Guest Network
Basic > Guest Network (2.4GHz or 5GHz)
Creating an isolated and separate wireless guest network (2.4GHz or 5GHz) allows
wireless clients to connect to your network for Internet access only and keep your local
LAN network safe by restricting guest access to your LAN network resources such as
shared documents and media files on your computers, network storage, and printers.
1. Log into your router management page (see “Access your router management page”
on page 9).
2. Click on Basic and click on Guest Network.
3. Review the Guest Zone settings, click Apply when finished.
Choose which band to enable the Guest Network (Wireless – 2.4GHz or 5GHz):
•Enabled – Check this option to enable the wireless guest network.
New Schedule – The schedule function allows you to define a schedule when the
wireless guest network should be turned on. To define a new schedule, click New
Schedule and refer to page 34 “ Create Schedules”. After you have created a new
schedule, click the drop-down list and the new schedule will be available for
selection. Note: Before applying scheduling, please ensure your Time settings are
configured correct and you have defined a schedule. See page 33 to configure
Time Settings and see page 34 “ Create Schedules” to create a schedule.
•Wireless Network Name (SSID) - This acronym stands for Service Set Identifier and
is the name of your wireless network. It differentiates your wireless network from
others around you. It is recommended to use a different name from your primary
wireless network to a name that you can easily identify and differentiate from the
primary. You can reference your guests to access this network instead of the
primary.
•Wireless Client Isolation – When this option is checked, wireless client devices
connected to your guest network(s) will be restricted from accessing other guests.
•Internet Access Only – When this option is checked, wireless client devices
connected to your guest network(s) will be restricted from accessing your private
LAN and wireless clients connected to your primary wireless network, Internet
access only. If unchecked, allows wireless client devices connected your guest
network(s) complete access to your private LAN, primary wireless network, and
Internet.
4. Under Security Mode, you can apply a different wireless security type and key to the
guest network. Please refer to page 12 to find out about different security types and
page 13 for wireless security configuration.
•Security Mode – Select the wireless security to use for the guest network.

© Copyright 2014 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide TEW-813DRU
13
Parental Control
Basic > Parental Control
Parental control settings allow you to set up restrictions/filters specifically who is
allowed or denied access to your network for a specified period of time and restricted
access to web content.
Access Rule (MAC/IP Filter)
Basic > Parental Control
Every network device has a unique, 12-digit MAC (Media Access Control) address. Every
network device must be assigned or configured with a specific IP address in order to
communicate with your network which is typically assigned by your router DHCP server
automatically. Using access rules, you can deny specific computers and other devices
from using this router’s wired or wireless network by specifying the MAC address or IP
address.
1. Log into your router management page (see “Access your router management page”
on page 9).
2. Click on Basic, click on Parental Control.
3. Check Enabled to enable the access rule.
4. Enter a Rule Name.
5. Select which Address Type to apply the filter. (MAC Address or IP Address)
Note: If you device is not listed, please refer to your computer or device documentation
to find the MAC address.
6. Manually enter the MAC Address or IP Address in the field.
Note: If the network device is connected to your router, you can also click the drop-down
list to choose one of the network devices (MAC Address/IP Address) detected by your
router.
7. Schedule (Optional) – The schedule function allows you to define a schedule when
the access should be active and blocking the specified MAC address or IP address. To
define a new schedule, click New Schedule and refer to page 34 “ Create Schedules”.
After you have created a new schedule, click the drop-down list and the new schedule
will be available for selection. Note: Before applying scheduling, please ensure your Time
settings are configured correct and you have defined a schedule. See page 33 to
configure Time Settings and see page 34 “ Create Schedules” to create a schedule.
8. Click Add to add the access rule to the Access Rule List. Wait of the rule to be added.
Note: Clicking Reset will discard your settings and clear all fields.
Note: In the Access Rule List, you can edit a rule by clicking under the Edit column
next to the rule you would like to edit. You can also delete a rule by clicking under
the Delete column next to the rule you would like to delete.

© Copyright 2014 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide TEW-813DRU
14
Website Filter
Basic > Parental Control
You may want to block computers or devices on your network access to specific
websites (e.g. www.xxxxxxxxx.com, etc.), also called domains or URLs (Uniform Resource
Locators). You may also apply a schedule when these websites are allowed or denied.
1. Log into your router management page (see “Access your router management page”
on page 9).
2. Click on Basic and click on Parental Control.
3. Under Website Filter, click the Website Filter drop-down list and choose one of the
following options.
•Disable disables website filtering.
•DENY computers access to ONLY these sites: Only Deny computers/devices access
to the listed websites and allow access to others.
•ALLOW computers access to ONLY these sites: Only Allow computers/devices
access to the listed websites and deny access to others.
4. Check Enable to enable the access rule.
5. Enter a Rule Name.
6. Enter aURL (ex. www.xxxxxxxx.com) to apply for the filter or block
7. Schedule (Optional) – The schedule function allows you to define a schedule when
the access should be active and blocking the specified website. To define a new
schedule, click New Schedule and refer to page 34 “ Create Schedules”. After you have
created a new schedule, click the drop-down list and the new schedule will be available
for selection. Note: Before applying scheduling, please ensure your Time settings are
configured correct and you have defined a schedule. See page 33 to configure Time
Settings and see page 34 “ Create Schedules” to create a schedule.
8. Click Add to add the access rule to the Access Rule List. Wait of the rule to be added.
Note: Clicking Reset will discard your settings and clear all fields.
Note: In the URL Fille List, you can edit a rule by clicking under the Edit column
next to the rule you would like to edit. You can also delete a rule by clicking under
the Delete column next to the rule you would like to delete.

© Copyright 2014 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide TEW-813DRU
15
Wireless Networking and Security
How to choose the type of security for your wireless network
Setting up wireless security is very important. Leaving your wireless network open and
unsecure could expose your entire network and personal files to outsiders. TRENDnet
recommends reading through this entire section and setting up wireless security on your
new router.
There are a few different wireless security types supported in wireless networking each
having its own characteristics which may be more suitable for your wireless network
taking into consideration compatibility, performance, as well as the security strength
along with using older wireless networking hardware (also called legacy hardware).
It is strongly recommended to enable wireless security to prevent unwanted users from
accessing your network and network resources (personal documents, media, etc.).
In general, it is recommended that you choose the security type with the highest
strength and performance supported by the wireless computers and devices in your
network. Please review the security types to determine which one you should use for
your network.
Wireless Encryption Types
•WEP: Legacy encryption method supported by older 802.11b/g hardware. This is
the oldest and least secure type of wireless encryption. It is generally not
recommended to use this encryption standard, however if you have old 802.11 b or
802.11g wireless adapters or computers with old embedded wireless cards(wireless
clients), you may have to set your router to WEP to allow the old adapters to
connect to the router.
Note: This encryption standard will limit connection speeds to 54Mbps.
•WPA: This encryption is significantly more robust than the WEP technology. Much
of the older 802.11g hardware was been upgraded (with firmware/driver upgrades)
to support this encryption standard. Total wireless speeds under this encryption
type however are limited to 54Mbps.
•WPA-Auto: This setting provides the router with the ability to detect wireless
devices using either WPA or WPA2 encryption. Your wireless network will
automatically change the encryption setting based on the first wireless device
connected. For example, if the first wireless client that connects to your wireless
network uses WPA encryption your wireless network will use WPA encryption. Only
when all wireless clients disconnect to the network and a wireless client with WPA2
encryption connects your wireless network will then change to WPA2 encryption.
Note: WPA2 encryption supports 802.11n speeds and WPA encryption will limit
your connection speeds to 54Mbps
•WPA2: This is the most secure wireless encryption available today, similar to WPA
encryption but more robust. This encryption standard also supports the highest
connection speeds. TRENDnet recommends setting your router to this encryption
standard. If you find that one of your wireless network devices does not support
WPA2 encryption, then set your router to either WPA or WPA-Auto encryption.
Note: Check the specifications of your wireless network adapters and wireless
appliances to verify the highest level of encryption supported.Below is brief
comparison chart of the wireless security types and the recommended
configuration depending on which type you choose for your wireless network.
Security Standard
WEP
WPA
WPA2
Compatible
Wireless
Standards
IEEE 802.11a/b/g
(802.11n devices
will operate at
802.11g to connect
using this standard)
IEEE 802.11a/b/g
(802.11n devices
will operate at
802.11g to connect
using this
standard)
IEEE
802.11a/b/g/n/ac
Highest
Performance
Under This
Setting
Up to 54Mbps
Up to 54Mbps
Up to 300Mbps (11n)
or 867Mbps (11ac)
Encryption
Strength
Low
Medium
High
Additional
Options
Open System or
Shared Key,
HEX or ASCII,
Different key sizes
TKIP or AES,
Preshared Key or
RADIUS
TKIP or AES,
Preshared Key or
RADIUS
Recommended
Configuration
Open System ASCII
13 characters
TKIP
Preshared Key
8-63 characters
AES
Preshared Key
8-63 characters
*Dependent on the maximum 802.11n data rate supported by the device (150Mbps,
300Mbps) or maximum 802.11ac data rate supported by the device (433Mbps,
867Mbps)

© Copyright 2014 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide TEW-813DRU
16
Secure your wireless network
Basic > Wireless
After you have determined which security type to use for your wireless network (see
“How to choose the security type for your wireless network” on page 12), you can set up
wireless security.
Note: By default, your router is configured with a predefined wireless network name
(SSID) and security key using WPA2-Personal. The predefined wireless network name and
security can be found on the sticker on the side of the router or on the device label at the
bottom of the router.
1. Log into your router management page (see “Access your router management page”
on page 9).
2. Click on Basic, and click on Wireless.
3. Under Security, click on the Security Mode drop-down list to select your wireless
security type.
Selecting WEP:
If selecting WEP (Wired Equivalent Privacy), please review the WEP settings to configure
and click Apply to save the changes.
•Security Mode: Choose WEP-OPEN, WEP-SHARED, or WEP-AUTO.
Note: It is recommended to use Open since it is known to be more secure than
Shared Key.
•Default Key: Choose the key index to use for security to the corresponding WEP
Keys 1-4. You can only use one key at any given time.
Note: Please note that they wireless client key index 1-4 should also match the key
index chosen here in order to establish connection.
•WEP Key 1-4: Enter the WEP key. This is the password or key that is used to
connect your computer to this router wirelessly. You can enter 64-bit or 128-bit
key. You can enter up to four keys but only the one chosen as the Default Key will
be used.
Note: It is recommended to use 128-bit because it is more secure to use a key that
consists of more characters.
•Hex/ASCII: Enter the WEP key format. See the table below for the acceptable
characters and lengths for each format.
WEP Key Format HEX ASCII
Character set 0-9 & A-F, a-f only Alphanumeric (a,b,C,?,*, /,1,2, etc.)
64-bit key length 10 characters 5 characters
128-bit key length 26 characters 13 characters

© Copyright 2014 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide TEW-813DRU
17
Selecting WPA-Personal / WPA2-Personal / WPA2-Personal Mixed
(WPA2-Personal recommended):
In the Security Mode drop-down list, select WPA-Personal, WPA2-Personal, or WPA2-
Personal Mixed. Please review the WPA-Personal settings to configure and click Apply
to save the changes.
The following section outlines options when selecting WPA-Personal, WPA2-Personal,
or WPA2-Personal Mixed (Preshared Key),
•WPA Cipher:Select a Cipher Type to use.
oWhen selecting WPA2-Personal Mixed security, it is recommended to use
TKIP/AES.
oWhen selecting WPA2-Personal security, it is recommended to use AES.
•WPA Pre-Shared Key: Enter the passphrase.
oThis is the password or key that is used to connect your computer to this router
wirelessly
Key Format: 8-63 alphanumeric characters (a,b,C,?,*, /,1,2, etc.)
•Key Update Interval: Enter the time interval (seconds) of when the network
passphrase will rotate.
Note: It is recommended to use the default interval time. Your passphrase will not
change, rotation of the key is part of the WPA protocol and designed to increase
security.
Selecting WPA-Enterprise / WPA2-Enterprise / WPA2-Enterprise Mixed
(WPA2-Personal recommended):
The following section outlines options when selecting WPA-Enterprise, WPA2-
Enterprise, or WPA2-Enterprise Mixed (EAP or RADIUS). This security type is also known
as EAP (Extensible Authentication Protocol) or Remote Authentication Dial-In User
Service or RADIUS.
Note: This security type requires an external RADIUS server, Pre-Shared Key only requires
you to create a passphrase.
•WPA Cipher:Select a Cipher Type to use.
oWhen selecting WPA2-Personal Mixed security, it is recommended to use
TKIP/AES.
oWhen selecting WPA2-Personal security, it is recommended to use AES.
•Key Update Interval: Enter the time interval (seconds) of when the network
passphrase will rotate.
Note: It is recommended to use the default interval time. Your passphrase will not
change, rotation of the key is part of the WPA protocol and designed to increase
security.
•RADIUS Server Address: Enter the IP address of the RADIUS server. (e.g.
192.168.10.250)
•RADIUS Port: Enter the port your RADIUS server is configured to use for RADIUS
authentication.
Note: It is recommended to use port 1812 which is typical default RADIUS port.
•RADIUS Server Shared Secret: Enter the shared secret used to authorize your
router with your RADIUS server.