TREX ZROADZ Series User manual

GRILLE Assembly - Complete
Page 1
The ZROADZ Series Grilles comes into 2 different configurations. One style features the LED Light Bar mounting hidden on the backside, while
the other style has exposed mounting provisions on the face side of the grille. Please note this and identify your ZROADZ Grille Series configuration and follow the
instruction version that corresponds with your grille.
START HERE
STEP 1
STEP 2
STEP 3
STEP 4
STEP 1
STEP 2
STEP 3
STEP 4
GRILLE CONFIGURATION STYLE 2
EXPOSED LED LIGHTHIDDEN LED LIGHT
GRILLE CONFIGURATION STYLE 1
ZROADZ Grille series - LED Installation Guide
FIG 1 FIG 2
FIG 1
FIG 5
FIG 7
FIG 1
FIG 5
FIG 7
FIG 3 FIG 3
FIG 2
FIG 6
FIG 8
FIG 2
FIG 6
FIG 8
FIG 4 FIG 4
Lay out your parts. From the backside of the grille, put
into place the ZROADZ Logo Backing Plate.
Put into place one of the Bracket Tabs and seucre with
provided Hardware as seen in Fig. # 2-4 and then from the
backside of grille position LED Light Bar.
With LED Light placement set, put into position the
remaining bracket and the finally tighten LED and all
Mounting Brackets into their final secured position.
Lay out your parts. From the backside of the grille, put
into place the ZROADZ Logo Backing Plate.
Put into place one of the Bracket Tabs and seucre with
provided Hardware as seen in Fig. # 1-4.
From the face side of grille slip the LED Light bar into
place. On the opposite side, position the remaining
bracket and finally tighten LED and Brackets into position.
There is a final step for both styles of ZROADZ Grilles. See
both of the Figure #8 Images and note that there is an
exposed hole. Use the Provided Hardware Button Head
Screw and fill the hole and tighted down with Nut. This
will create symetrical look from side to side.

Z315721
2013 FORD
F-150
2013 FORD F-150
ZROADZ Series Grille
Page 1 of 1
10/17/16 Thank you for Purchasing a T-Rex Product.
TOOLS REQUIRED:
Plastic Prybar
Die Grinder
Drill & 1/8 Drillbit
Step 1 Remove Factory Grille Shell
• Remove 6 Bolts along the top of the Grille Shell. (Fig. 1)
• Remove 2 Clips along the Vericle Support Bar. (Fig. 2)
• Place the Plastic Prybar in betwen the Grille Shell and Hood, Firmly start nudging
away the Grille Shell from the Hood. (the Grille Shell is latched on with Clips.). (Fig. 3)
Remove the Grille Shell.
Step 2 Installing Grille
•With a Die Grinder, Remove the Vertical and Horizontal Plastic Bars that are around
the Grille. (Fig. 4 & 5)
• Place the Grille into the Grille Opening. (Fig. 6)
• Place L-Brackets onto the Threaded Studs that are on the Grille and use Nylon Lock
Nuts. (Fig. 7)
• Use the 1/8 Drillbit to Drill through the Brackets that are on the Sides of the Grille and
place #8 Screws through them, Place Flatnuts behind to Thread the #8 Screw. (Fig. 8)
INSTALLATION COMPLETE
PLEASE READ AND UNDERSTAND ALL INSTRUCTIONS
BEFORE ATTEMPTING INSTALLATION.
PARTS LIST:
(1) Mesh Grille (2) Flatnuts
(8) L-Brackets
(8) 6/32 Nylon Lock Nuts
(2) #8 Screws
Fig 6 Fig 7
Fig 4
Fig 2
Fig 1
Fig. 3 Fig 5
Fig 8
Install time: 45 Mins
Z315721
2013 FORD
F-150